Hello I have some setup problems. I compiled and install as following: /prompt$ make mode=debug all prompt$ su prompt# make install /To run openSer I tried: /prompt# /usr/local/sbin/openser / and /prompt# /usr/local/sbin/openser D E / in both case there is the following output: / 127.0.0.1 [127.0.0.1]:5060 192.168.1.86 [192.168.1.86]:5060 192.169.4.86 [192.169.4.86]:5060 192.168.13.86 [192.168.13.86]:5060 127.0.0.1 [127.0.0.1]:5060 192.168.1.86 [192.168.1.86]:5060 192.169.4.86 [192.169.4.86]:5060 192.168.13.86 [192.168.13.86]:5060 Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.168.1.86 [192.168.1.86]:5060 udp: 192.169.4.86 [192.169.4.86]:5060 udp: 192.168.13.86 [192.168.13.86]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.168.1.86 [192.168.1.86]:5060 tcp: 192.169.4.86 [192.169.4.86]:5060 tcp: 192.168.13.86 [192.168.13.86]:5060 Aliases: tcp: michel:5060 tcp: michel.local:5060 tcp: localhost:5060 udp: michel:5060 udp: michel.local:5060 udp: localhost:5060 //prompt# /Attached my config file ( /etc/openser/openser.cfg). On this config file, I set listen=192.168.13.86 so I expected the openSER to listen only 192.168.13.86. Actually I don't understand from where the application takes the openser.cfg file? I removed /etc/openser/openser.cfg but the application is still running. / /Regards, Michel. / / # # $Id: openser.cfg,v 1.6.2.1 2006/07/17 15:51:03 klaus_darilion Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode */ fork=no log_stderror=yes /**/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.13.86 port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/openser/modules/auth.so" #loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"(a)tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"(a)tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }