Yes, both phones register and their location gets updated on the database.

Quoting Klaus Darilion darilion@ict.tuwien.ac.at:

Are you sure that sip:crhme@ntmare.madcrew.com were registered at the proxy?

Klaus

...

-----Original Message----- From: rdeus@netxinternet.com [mailto:rdeus@netxinternet.com] Sent: Tuesday, December 09, 2003 5:26 PM To: serusers@lists.iptel.org Subject: [Serusers] Aliases not working

Im using ser version 8.13-dev-23-merged and I currently have it configured for Mysql auth and userloc. If I use the serctl to add an alias (eg. serctl alias add 233 sip:crhme@ntmare.madcrew.com) it gets added to the database no problem and the crhme@ntmare.madcrew.com is in the subscriber table, but If I dial 233 from my grandstream i get a "404 Not found". Does anyone know why?

Thanks in advance for your help.

ngrep:

U x.173.194.72:5060 -> x.173.194.73:5060 INVITE sip:233@ntmare.madcrew.com SIP/2.0..Via: SIP/2.0/UDP x.173.194.72..From: "Ron" sip:menace@ntmare.madcrew.com;tag= b8536457-2dc6-f64d-1418-eeb8407ccd3a..To: sip:233@nitemare.madcrew.com..Contact: sip:menace@x.173.194.72..Call-ID: b1523cfa-3c0 9-2f0a-6091-fd916457576c@x.173.194.72..CSeq: 11885 INVITE..User-Agent: Grandstream SIP UA 1.0.4.17..Max-Forwards: 70..Allow: INVITE , ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE..Content-Type: application/sdp..Content-Length: 261....v=0..o=menace 0 0 IN IP4 x.173.194.72..s=-..c=IN IP4 x.173.194.72..t=0 0..m=audio 5004 RTP/AVP 0 8 4 18 2 15..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA /8000..a=rtpmap:4 G723/8000..a=rtpmap:18 G729/8000..a=rtpmap:2 G726-32/8000..a=rtpmap:15 G728/8000..a=ptime:20.. #

U x.173.194.73:5060 -> x.173.194.72:5060 SIP/2.0 404 Not Found..Via: SIP/2.0/UDP x.173.194.72..From: "Ron " sip:menace@ntmare.madcrew.com;tag=b8536457-2dc6-f64d-141 8-eeb8407ccd3a..To: sip:233@ntmare.madcrew.com;tag=b27e1a1d33761e85846fc98f5f3a7 e58.a9c9..Call-ID: b1523cfa-3c09-2f0a-6091-fd916 457576c@x.173.194.72..CSeq: 11885 INVITE..Server: Sip EXpress router (0.8.13-dev-23-merged (i386/linux))..Content-Length: 0..Warnin g: 392 x.173.194.73:5060 "Noisy feedback tells: pid=25048 req_src_ip=x.173.194.72 req_src_port=5060 in_uri=sip:233@ntmare.madcr ew.com out_uri=sip:233@ntmare.madcrew.com via_cnt==1"....

# U x.173.194.72:5060 -> x.173.194.73:5060 ACK sip:233@ntmare.madcrew.com SIP/2.0..Via: SIP/2.0/UDP x.173.194.72..From: "Ron " sip:menace@ntmare.madcrew.com;tag=b85 36457-2dc6-f64d-1418-eeb8407ccd3a..To: sip:233@ntmare.madcrew.com;tag=b27e1a1d33761e85846fc98f5f3a7 e58.a9c9..Contact: sip:menace@x.173.194.72..Call-ID: 1523cfa-3c09-2f0a-6091-fd916457576c@x.173.194.72..CSeq: 11885 ACK..User-Agent: Grandstream SIP UA 1.0.4.17..Max-Forwards: 70..Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE..Content-Length: 0....

ser.cfg

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (msg:len >=  max_len ) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n");
            route(1);
            break;
    };

    if (!uri==myself) {
            # mark routing logic in request
            append_hf("P-hint: outbound\r\n");
            route(1);
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("ntmare.madcrew.com", "subscriber")) {

www_challenge("ntmare.madcrew.com", "0"); break; };

                    save("location");
                    break;
            };

            lookup("aliases");
            if (!uri==myself) {
                    append_hf("P-hint: outbound alias\r\n");
                    route(1);
                    break;
            };

            # native SIP destinations are handled using 

our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); }

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers