Set modparam("usrloc", "use_domain", "1"). 0.8.13 is the development branch and that's work in progress so don't expect things always work as expected. I do not recomment using the unstable branch.

Jan.

On 30-01 17:42, Andres wrote:

Hi,

In 0.8.13 the location table stores values as "username@domain" in the username column, but in previous versions it was just "username". Is there is a config parameter to switch between one format and the other?

And the "serctl ul show <username>" never finds anyone, even though the "serctl ul show" command clearly shows them there. For example:

serctl ul show 1040@sip.telesip.net 404 Username 1040 in table location not found

and.... serctl ul show....

...Record(0x422be248)... domain: 'location' aor : '1040@sip.telesip.net'

domain : 'location'
aor    : '1040@sip.telesip.net'
Contact: 'sip:1040@200.118.1.1:5060;user=phone;transport=udp'
Expires: 594
q      :       0.00
Call-ID: '1436722947@200.118.1.1'
CSeq   : 63
replic : 0
State  : CS_DIRTY
Flags  : 0
next   : (nil)
prev   : (nil)
~~~/Contact~~~~

Is there anything obvious I am missing here?

Thanks,

-- 
Andres
Network Admin
http://www.telesip.net


_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers