Hello,
I read the howto frop onsip.org in order to set NAT with rtpproxy.
I setup ser-0.9.0 rtpproxy from CVS it's ok .
192.168.0.0/24---FW+NAT---SER+rtpproxy------public network
Here are my netfilter rules below :
My two Polycom ip 300 (alice & bob) are able to register to ser but Subscribe/Notify via SIMPLE don't work !?
When i try to call alice from bob or bob from alice ser reply 404 not found !!!!!!!
I wasted much time with ethereal to find the solution.
Thanks for help
Harry -:(
Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1273 885K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW 70 4610 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 678 32876 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 26 1994 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
Chain OUTPUT (policy DROP 1 packets, 164 bytes) pkts bytes target prot opt in out source destination 2072 424K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 state NEW 32 2432 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 47 2820 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 80 5888 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
__________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Your attached ser.cfg does not use nathalper/rtpproxy. Using the right rtpproxy config file could help: http://www.onsip.org/modules/mydownloads/visit.php?cid=13&lid=19
Please note (as posted a couple of times already): That file has a small error that is in the works to be fixed. Between line 194 and 195, you need to insert: fix_nated_contact(); g-)
harry gaillac wrote:
Hello,
I read the howto frop onsip.org in order to set NAT with rtpproxy.
I setup ser-0.9.0 rtpproxy from CVS it's ok .
192.168.0.0/24---FW+NAT---SER+rtpproxy------public network
Here are my netfilter rules below :
My two Polycom ip 300 (alice & bob) are able to register to ser but Subscribe/Notify via SIMPLE don't work !?
When i try to call alice from bob or bob from alice ser reply 404 not found !!!!!!!
I wasted much time with ethereal to find the solution.
Thanks for help
Harry -:(
Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1273 885K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW 70 4610 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 678 32876 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 26 1994 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
Chain OUTPUT (policy DROP 1 packets, 164 bytes) pkts bytes target prot opt in out source destination 2072 424K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 state NEW 32 2432 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 47 2820 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 80 5888 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hello,
what's wrong in ser.cfg !!!!!!!!!!! I use domain module with is_from_local() function but phones can't register neither invite !!!!
I spend too much time with that project, may be i'm stupid ???
Harry
--- "Greger V. Teigre" greger@teigre.com a écrit :
Your attached ser.cfg does not use nathalper/rtpproxy. Using the right rtpproxy config file could help:
http://www.onsip.org/modules/mydownloads/visit.php?cid=13&lid=19
Please note (as posted a couple of times already): That file has a small error that is in the works to be fixed. Between line 194 and 195, you need to insert: fix_nated_contact(); g-)
harry gaillac wrote:
Hello,
I read the howto frop onsip.org in order to set
NAT
with rtpproxy.
I setup ser-0.9.0 rtpproxy from CVS it's ok .
192.168.0.0/24---FW+NAT---SER+rtpproxy------public
network
Here are my netfilter rules below :
My two Polycom ip 300 (alice & bob) are able to register to ser but Subscribe/Notify via SIMPLE
don't
work !?
When i try to call alice from bob or bob from
alice
ser reply 404 not found !!!!!!!
I wasted much time with ethereal to find the
solution.
Thanks for help
Harry -:(
Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out
source
destination1273 885K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state
NEW
70 4610 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state
NEW
0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:80
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:443
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:21
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:2401
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:53
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:123
state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp
type 0
code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp
type 8
code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:5060
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:5060
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 678 32876 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0
reject-with
tcp-reset 26 1994 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0
reject-with
icmp-net-prohibited
Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out
source
destination0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state
NEW
0 0 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state
NEW
0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:80
state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp
dpt:80
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:443
state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp
dpt:443
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:21
state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp
dpt:21
state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:2401
state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp
dpt:2401
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:53
state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp
dpt:53
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:123
state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp
dpt:123
state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp
type 0
code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp
type 8
code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp
type 0
code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp
type 8
code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp
dpt:5060
state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp
dpt:5060
state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp
dpt:5060
state NEW 0 0 ACCEPT udp -- * ppp0
=== message truncated ===
__________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
-
Greger V. Teigre -
harry gaillac