31 Mar
2005
31 Mar
'05
6:12 p.m.
Hi everyone!
I want to implement an ENUM query in my routing block with comfort. I
want ENUM queries always to be done because VoIP-Calls are cheaper than
PSTN-routed ones.
I want to let the user request e.g. "sip:089123456@mydomain.org" and the
script should query for "6.5.4.3.2.1.9.8.9.4.e164.arpa" (I'm in munich
(prefix 089), germany (prefix +49); a single zero indicates long
distance calls, two zeros indicate international calls, local calls
don't have leading zeros)
The idea is to complete the requested uri to be a e164 address and then
start a query
The logic should be like:
if (uri_is_e164) {
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:0[1-9][0-9]{1,14}@.*") {
# national call
replace "leading 0" with "+49";
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:00[1-9][0-9]{1,13}@.*") {
# international call
replace "leading 00" with "+";
if (do_enum_query)
t_relay;
}
I don't get the hang of those textops functions because sometimes they
work and sometimes they don't, especially after other modules have been
changing the uri.
In addition, if one of those enum-queries fails, the uri should be
reverted to the original one (with "0" or "00").
How would the correct ser.cfg-script look like?
Alex Mack
31 Mar
31 Mar
7:38 p.m.
1. use strip() and prefix() to bring the URI into E.164 format.
2. Make an ENUM lookup.
2a. successful? t_relay()
2b. If the lookup fails, the request URI is still the E.164 number.
Thus, send it to the gateway (maybe you have to use strip/prefix again
to bring the number into a format knwon by the gateway).
regards,
klaus
Alex Mack wrote:
Hi everyone!
I want to implement an ENUM query in my routing block with comfort. I
want ENUM queries always to be done because VoIP-Calls are cheaper than
PSTN-routed ones.
I want to let the user request e.g. "sip:089123456@mydomain.org" and the
script should query for "6.5.4.3.2.1.9.8.9.4.e164.arpa" (I'm in munich
(prefix 089), germany (prefix +49); a single zero indicates long
distance calls, two zeros indicate international calls, local calls
don't have leading zeros)
The idea is to complete the requested uri to be a e164 address and then
start a query
The logic should be like:
if (uri_is_e164) {
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:0[1-9][0-9]{1,14}@.*") {
# national call
replace "leading 0" with "+49";
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:00[1-9][0-9]{1,13}@.*") {
# international call
replace "leading 00" with "+";
if (do_enum_query)
t_relay;
}
I don't get the hang of those textops functions because sometimes they
work and sometimes they don't, especially after other modules have been
changing the uri.
In addition, if one of those enum-queries fails, the uri should be
reverted to the original one (with "0" or "00").
How would the correct ser.cfg-script look like?
Alex Mack
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
1 Apr
1 Apr
1:27 p.m.
Hi Klaus!
Seems not so hard to implement. Thanks!
Does '=~' still work after an 'lookup("aliases")' has been done
or is it
only querying against the original SIP message? (This way an e164 alias
could be created)
I'm confused because of the textop's README warning about only being
effectful against the original message not the uri actual mangled by
other modules beforehand. Or isn't '=~' a textops operator at all?
BTW is there a list around naming all variables useable in ser-scripts?
Thanks
Alex Mack
Klaus Darilion schrieb:
1. use strip() and prefix() to bring the URI into
E.164 format.
2. Make an ENUM lookup.
2a. successful? t_relay()
2b. If the lookup fails, the request URI is still the E.164 number.
Thus, send it to the gateway (maybe you have to use strip/prefix again
to bring the number into a format knwon by the gateway).
regards,
klaus
Alex Mack wrote:
Hi everyone!
I want to implement an ENUM query in my routing block with comfort. I
want ENUM queries always to be done because VoIP-Calls are cheaper
than PSTN-routed ones.
I want to let the user request e.g. "sip:089123456@mydomain.org" and
the script should query for "6.5.4.3.2.1.9.8.9.4.e164.arpa" (I'm in
munich (prefix 089), germany (prefix +49); a single zero indicates
long distance calls, two zeros indicate international calls, local
calls don't have leading zeros)
The idea is to complete the requested uri to be a e164 address and
then start a query
The logic should be like:
if (uri_is_e164) {
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:0[1-9][0-9]{1,14}@.*") {
# national call
replace "leading 0" with "+49";
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:00[1-9][0-9]{1,13}@.*") {
# international call
replace "leading 00" with "+";
if (do_enum_query)
t_relay;
}
I don't get the hang of those textops functions because sometimes
they work and sometimes they don't, especially after other modules
have been changing the uri.
In addition, if one of those enum-queries fails, the uri should be
reverted to the original one (with "0" or "00").
How would the correct ser.cfg-script look like?
Alex Mack
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
3:31 p.m.
AFAIK =~ matches current URI, nor original URI.
strip and prefix are not part of textops and modify the current URI.
textops funtions only apply to the original URI. Using textop functions
several times on the same message (or to rewrite the request URI) may be
dangerous.
regards,
klaus
Alex Mack wrote:
Hi Klaus!
Seems not so hard to implement. Thanks!
Does '=~' still work after an 'lookup("aliases")' has been done
or is it
only querying against the original SIP message? (This way an e164 alias
could be created)
I'm confused because of the textop's README warning about only being
effectful against the original message not the uri actual mangled by
other modules beforehand. Or isn't '=~' a textops operator at all?
BTW is there a list around naming all variables useable in ser-scripts?
Thanks
Alex Mack
Klaus Darilion schrieb:
1. use strip() and prefix() to bring the URI into
E.164 format.
2. Make an ENUM lookup.
2a. successful? t_relay()
2b. If the lookup fails, the request URI is still the E.164 number.
Thus, send it to the gateway (maybe you have to use strip/prefix again
to bring the number into a format knwon by the gateway).
regards,
klaus
Alex Mack wrote:
Hi everyone!
I want to implement an ENUM query in my routing block with comfort. I
want ENUM queries always to be done because VoIP-Calls are cheaper
than PSTN-routed ones.
I want to let the user request e.g. "sip:089123456@mydomain.org" and
the script should query for "6.5.4.3.2.1.9.8.9.4.e164.arpa" (I'm in
munich (prefix 089), germany (prefix +49); a single zero indicates
long distance calls, two zeros indicate international calls, local
calls don't have leading zeros)
The idea is to complete the requested uri to be a e164 address and
then start a query
The logic should be like:
if (uri_is_e164) {
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:0[1-9][0-9]{1,14}@.*") {
# national call
replace "leading 0" with "+49";
if (do_enum_query)
t_relay;
} else if (uri =~ "sip:00[1-9][0-9]{1,13}@.*") {
# international call
replace "leading 00" with "+";
if (do_enum_query)
t_relay;
}
I don't get the hang of those textops functions because sometimes
they work and sometimes they don't, especially after other modules
have been changing the uri.
In addition, if one of those enum-queries fails, the uri should be
reverted to the original one (with "0" or "00").
How would the correct ser.cfg-script look like?
Alex Mack
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7175
days inactive
7176
days old
3 comments
2 participants
participants (2)
-
Alex Mack -
Klaus Darilion