RE: [Serusers] LCR failure syntax - sr-users

20 Apr 2005


      FYI, I *finally* got around to doing this. A debug shows that load_gw is
in fact loading both gateways..
8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_addr,374650ce>
 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112)
 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a3ec frag.
0xf509a3d4 (size=32) on 1 -th hit
 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_port,0>
 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112)
 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a43c frag.
0xf509a424 (size=32) on 1 -th hit
 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_addr,511f7d1>
 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112)
 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a48c frag.
0xf509a474 (size=32) on 1 -th hit
 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_port,0>
Thoughts? Thanks.
-----Original Message-----
From: Juha Heinanen [mailto:jh@tutpro.com] 
Sent: Tuesday, April 12, 2005 11:59 PM
matt,
you could first check which gws get loaded by turning debugging on:
DBG("load_gws(): DEBUG: Added gw_addr_port_avp <%x, %d>\n",
        *((unsigned int *)(val.s->s)),
        *((unsigned short *)(val.s->s + 4)));
-- juha