sir, i am install ser sucessfully and my two user connect and they can talk easilly using xlite(softphone),but i have faced one problem that i could not store the information about call information in acc table of ser database. i store the user location information in the database but not call inforation.i load all the module which is needed to accounting table such as(acc &tm).
i am sending my configuration file.
# # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (*cmd* line: -dddddddddd) #fork=yes #log_stderror=no # (*cmd* line: -E)
/* Uncomment these lines to enter debugging *mode* fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" #SER_SQL_URI="mysql:*//ser:heslo@localhost/ser"* # ------------------ module *loading* ----------------------------------
# Uncomment this if you want to *use* SQL database loadmodule "/usr/local/ser-0.9.6/modules/mysql/mysql.so"
loadmodule "/usr/local/ser-0.9.6/modules/sl/sl.so" loadmodule "/usr/local/ser-0.9.6/modules/tm/tm.so" loadmodule "/usr/local/ser-0.9.6/modules/rr/rr.so" loadmodule "/usr/local/ser-0.9.6/modules/maxfwd/maxfwd.so" loadmodule "/usr/local/ser-0.9.6/modules/usrloc/usrloc.so" loadmodule "/usr/local/ser-0.9.6/modules/registrar/registrar.so" loadmodule "/usr/local/ser-0.9.6/modules/textops/textops.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/ser-0.9.6/modules/auth/auth.so" loadmodule "/usr/local/ser-0.9.6/modules/auth_db/auth_db.so" loadmodule "/usr/local/ser-0.9.6/modules/acc/acc.so" # ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to *use* SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you *set* "calculate_ha1" parameter to yes (which true *in* this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "*password**")*
# -- rr params -- # add value to ;lr param to make some *broken* UAs happy modparam("rr", "enable_full_lr", 1)
# -- acc params -- # *set* the reporting *log* level modparam("acc", "log_level", 1) # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion *status* will be reported modparam("acc", "log_flag", 1 )
modparam("usrloc|acc|auth_db|group|msilo|uri","db_url","mysql:*//ser:heslo@localhost/ser")*
# ------------------------- request routing logic -------------------
# *main* routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (*msg*:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream *entities* # *use* different transport protocol if (!method=="REGISTER") record_route(); setflag(1); # subsequent messages withing a dialog should take the # *path* determined by record-routing if (loose_route()) { # mark routing logic *in* request append_hf("P-hint: rr-enforced\r\n"); route(1); break; };
if (!uri==myself) { # mark routing logic *in* request append_hf("P-hint: outbound\r\n"); route(1); break; };
# if the request is for other domain *use* UsrLoc # (*in* case, it does not work, use the following command # with proper names and addresses *in* it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to *use* digest authentication if (!www_authorize("192.168.1.7", "subscriber")) { www_challenge("192.168.1.7", "0"); break; }; setflag(1); *save*(*"location"*); record_route(); break; };
lookup("*alias*es"); if (!uri==myself) { append_hf("P-hint: outbound *alias*\r\n"); route(1); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; setflag(1); append_hf("P-hint: usrloc applied\r\n"); record_route(); route(1); }
route[1] { # send it out now; *use* stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }
i am waiting for ur replly
Regards aman sachdeva sachdeva.aman@gmail.com