I've just done a CVS download for sems as a cvs "newbie" I did the following to get sems from the cvs tree at berlios

CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems

export CVSROOT

cvs login

cvs co answer_machine

This then downloaded the stuff into the dir I was in, so I should now be able to run make and off we go..

So I think you just need to change you stuff to

CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser

export CVSROOT

cvs login

cvs co sip_router

________________________________

From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Sara Allton Sent: Thursday 13 May 2004 13:24 To: Klaus Darilion Cc: serusers@lists.iptel.org Subject: Re: [Serusers]: Problems with authentication

Thanks - I'm trying to download CVS versions as instructed in "direct CVS Access" - however i'm getting a 'BAD CVSROOT' error. I've also tried using the cvs -d option to specify the CVSROOT however it seems i'm not getting anywhere.

would appreciate further help on this as this is all new to me.

TIA

S ----- Original Message ----- From: Klaus Darilion Date: Thu, 13 May 2004 12:34:01 +0200 To: Sara Allton Subject: Re: [Serusers]: Problems with authentication > I suggest you to never mix ser rpms and source code installations.

> > If you need accounting, remove all ser rpms from your system and use CVS > versions only. > > Klaus > > Sara Allton wrote: > > > Thanks - it worked. > > > > One other question please. > > > > I've had to recompile ser from source since I need to log CDRs to Mysql > > rather than to syslog. However when i try to re-intsall the ser-mysl RPM > > package, I get a failed dependencies error. Its as if ser is not

> > installed at all. Is there something I'm missing out? > > > > Thanks > > > > Sar a > > > > ----- Original Message ----- > > From: Jan Janak > > Date: Sun, 9 May 2004 19:03:10 +0200 > > To: Sara Allton > > Subject: Re: [Serusers]: Problems with authentication > > > > > Change realm (the first parameter of www_authorize and www_challenge in > > > the configuration file) from localdomain.com to 192.168.2.16. That's > > > what you have configured in the subscriber table. > > > > > > Jan. > > > > > > On 08-05 12:29, Sara Allton wrote: > > > > > > > > Hi, > > > > > > > > I've installed SER on Redhat 9 but am having problems with getting a > > > > Cisco ATA registered. The server replies with message "401 > > > > Unauthorized". Below is the ser.cfg file, together with ngrep output > > > > and mysql subscriber table. > > > > > > > > What could the problem be? i've tried modifying the ser.cfg file in > > > > order to try and get this to work but without luck. I'm not too sure > > > > regarding the "realm" parameter being passed int the www-authenticate > > > > message. > > > > > > > > TIA > > > > > > > > Sara > > > > > > > > > > > > U 192.168.2.100:5060 -> 192.168.2.16:5060 > > > > > > > > REGISTER sip:192.168.2.16 SIP/2.0..Via: SIP/2.0/UDP > > > > 192.168.2.100:5060..From: sip:ciscoata@192.168.2.16..To: > > > > sip:ciscoata@192.168.2.16..Call-ID: > > > > > > > > 3435349313@192.168.2.100..CSeq: 2 REGISTER..Contact: > > > > ;expires=3500..User-Age > > > ; > nt: Cisco ATA v2.15 a > > > > > > > > ta18x (020927a)..Authorization: Digest > > > > username="ciscoata",realm="localdomain.com",nonce="409e41b0801685a46a7 > > > > 9d41e81d85c5adc6bca39",uri="sip:192.168.2.16",response="b878eb13908b9a > > > > 8251571111eb001acf"..Content-Length: 0.... < BR>> > > > > > # > > > > > > > > U 192.168.2.16:5060 -> 192.168.2.100:5060 > > > > > > > > SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 192.168.2.100:5060..From: > > > > sipciscoata@192.168.2.16..To: > > > > sip:ciscoata@192.168.2.16;tag=b27e1a1d33761e > > > > > > > > 85846fc98f5f3a7e58.8272..Call-ID: 3435349313@192.168.2.100..CSeq: 2 > > > > REGISTER..WWW-Authenticate: Digest realm="localdomain.com", > > > > nonce="409e4 1b1bc69e5210563de14a3dbfbb25941602e"..Server: Sip EXpress > > > > router (0.8.12 (i386/linux) > > > > > > > > )..Content-Length: 0..Warning: 392 192.168.2.16:5060 "Noisy feedback > > > > tells:pid=1631 req_src_ip=192.168.2.100 req_src_port=5060 > > > > in_uri=sip:192.168.2.16 out_uri=sip:192.168.2.16 via_cnt==1".... > > > > > > > > > > > > mysql> select * from subscriber; > > > > > > > > +----------------------------------+- > > ------------+--------------+----- > > > > -----+------------+-----------+-------+------------------------------- > > > > --+---------------------+---------------------+----------------------- > > > > -------------------+------+------------------+----------+------------- > > > > ---------------------+------------------ ----------------+-------+----- > > > > -------+----------+ > > > > > > > > | phplib_id | username | domain | > > > > password | first_name | last_name | phone | > > > > email_address | datetime_created | > > > > datetime_modified | confirmation & nbsp; | > > > > flag | sendnotification | greeting | ha1 > > > > | ha1b | perms | allow_find | timezone | > > > > > > > > +----------------------------------+-------------+--------------+----- > > > > -----+------------+-----------+-------+------------------------------- > > > > --+---------------------+------------------ > > ---+----------------------- > > > > -------------------+------+------------------+----------+------------- > > > > ---------------------+----------------------------------+---- ---+----- > > > > -------+----------+ > > > > > > > > | 65e397cda0aa8e3202ea22cbd350e4e9 | admin | 192.168.2.16 | > > > > heslo | Initial | Admin | 123 | > > > > root@localhost | 2002-09-04 19:37:45 | 0000-00-00 > > > > 00:00:00 | 57DaSIPuCm52UNe54 LF545750cfdL48OMZfroM53 | o > > > > > > > > | | | 2ff35d1f6572c03ae736bd567a46a30b | > > > > b4c79738fe441c8c26ebc11545423d23 | admin | 0 > > > > > > > > | NULL | > > > > > > > > | NULL | > > > > > > > > | 1fb8e96684801eb7bc53e44d68a18cca | ser | 192.168.2.16 | > > > > heslo | | | | ser@localhost | > > > > 2004-05-05 07:47:30 | 0000-00-00 00:00:00 | & > > > > nbsp; | o > > > > > > > > | | | 1fb8e96684801eb7bc53e4 4d68a18cca | > > > > 5023bfc28eff0b9fc0f48e22b14f5e2b | admin | 0 > > > > > > > > | NULL | > > > > > > > > > > > > | f3dbccc505c3611dd538857bbfa8a2b2 | test123 | 192.168.2.16 | > > > > test | | | | > > > > test123@192.168.2.16 | 2004-05-05 09:40:50 | 0000-00-00 > > > > 00:00:00 | &nbs p; | o > > > > > > > > | | | f3dbccc505c3611dd538857bbfa8a2b2 | > > > > 39e3709b96459dd7f5090277aaf988f4 | NULL | 0 > > > > > > > > | NULL | > > > > > > > > > > > > | b800b1c879ccf7bccfa1d0fffd6ac28a | ciscoata | 192.168.2.16 | > > > > qwerty | | | | ciscoata@mail.com | > > > > 2004-05-09 12:22:22 | 0000-00-00 00:00:00 | > > > > | o > > > > > > > & gt; | | | b800b1c879ccf7bccfa1d0fffd6ac28a | > > > > bd81df065d2931e0048989a9fa94e6d5 | NULL | 0 > > > > > > > > | NULL | > > > > > > > > +----------------------------------+-------------+-------------- > > +----- > > > > -----+------------+-----------+-------+------------------------------- > > > > --+---------------------+---------------------+----------------------- > > > > -------------------+------+------------------+----------+------------- > > > > ---------------------+----------------------------------+-------+----- > > > > -------+----------+ > > > > > > > > 4 rows in set (0.00 sec) > > > > > > > > > > > > # > > > > > > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > ; > > > > > > > # > > > > > > > > # simple quick-start config script > > > > > > > > # > > > > > > > > > > > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > > > > #fork=yes > > > > > > > > #log_ stderror=no # (cmd line: -E) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /* Uncomment these lines to enter debugging mode > > > > > > > > debug=7 > > > > > > > > fork=no > > > > > > > > log_stderror=yes > > > > > > > > */ > > > > > > > > check_via=no # (cmd. line: -v) > > > > > > > > dns=no # (cmd. line: -r) > > > > > > > > rev_dns=no # (cmd. line: -R) > > > > > > > > #port=5060 > > > > > > > > #children=4 > > > > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > > > > # ------------------ module loading ---------------------------------- > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > > > > > > > > > > > loadmodul e "/usr/lib/ser/modules/sl.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > > > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > > > # mysql.so must be loaded ! > > > > > > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > > > > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > > > # ----------------- setting m odule-specific parameters --------------- > > > > > > > > > > > > > > > > # -- usrloc params -- > > > > > > > > modparam("usrloc", "db_url", "sql://ser:heslo@192.168.2.16/ser") > > > > > > > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > > # for persistent storage and comment the previous line > > > > > > > > modparam("usrloc", "db_mode", 2) > > > > > > > > > > > > > > > > # -- auth params -- > > > > > > > > modparam("auth_db", "db_url", "sql://ser:heslo@192.168.2.16/ser") > > > > > > > > # Uncomment if you are using auth module > > > > > > > > # > > > > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > > > > # > > > > > > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > > config), > > > > > > > > # uncomment also the following parameter) > > > > > > > > # > > > > > > > > modparam("auth_db", "password_column", "password") > > > > ; > > > > > > > > > > > > # -- rr params -- > > > > > > > > # add value to ;lr param to make some broken UAs happy > > > > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > > > > > > > # ------------------------- request routing logic ------------------- > > > > > > > > > > > > > > > > # main routing logic > > > > > > > > > > > > > > > > route{ > > > > > > > > > > > > > > > > # initial sanity checks -- messages with > > > > > > > > # max_forwards==0, or excessively long requests > > > > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > > > > sl_send_reply("483","Too Many Hops"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > if ( msg:len > max_len ) { > > > > > > > > sl_send_reply ("513", "Message too big"); > > > > < BR>> > break; > > > > > > > > }; > > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > > > > # subsequent messages will go through our proxy; that's > > > > > > > > # particularly good if upstream and downstream entities > > > > > > > > # use different transport protocol > > > > > > > > record_route(); > > > > > > > > # loose-route processing > > > > > > > > if (loose_route()) { > > > > > > > > t_relay(); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > > > > # (in case, it does not work, use the following command > > > > > > > > # with proper names and addresses in it) > > > > > > > > # if (uri==myself) { > > > > > > > > if (uri=~"^sip :(.+@)?(192.168.2.16)([:;?].*)?$") { > > > > > > > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > > > > if (!www_authorize("", "subscriber")) { > > > > > > > > www_challenge("", "0"); > > > > > > > > break; > > > > > > ; > > }; > > > > > > > > > > > > > > > > save("location"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > # native SIP destinations are handled using our USRLOC > > > > DB > > > > > > > > if (!lookup("location")) { > > > > > > > > sl_send_reply("404", "Not Found"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > }; > > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > > if (! t_relay()) { > > > > > > > > sl_reply_error(); > > > > > > > > }; > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > ___________________________________________________________ > > > > Sign-up for Ads Free at Mail.com > > > > [1]http://www.mail.com/?sr=signup > > > > > > > > References > > > > > > > > 1. > > http://mail01.mail.com/scripts/payment/adtracking.cgi?bannercode=adsfreejump 01 > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > Serusers@ipte l.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > -- > > > > ___________________________________________________________ > > Sign-up for Ads Free at Mail.com > > http://www.mail.com/?sr=signup > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Serusers mailing list > > serusers@lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers

--

___________________________________________________________ Sign-up for Ads Free at Mail.com http://www.mail.com/?sr=signup http://mail01.mail.com/scripts/payment/adtracking.cgi?bannercode=adsfreejum p01