1 Oct
2003
1 Oct
'03
6:20 a.m.
Dear Ladies and Gentlemen,
after installing the version 0.8.11 I am facing a strange problem:
In my dialing plan, all numbers starting with a 0 should go to a
PSTN-gateway (172.16.0.101). So I have in my ser.cfg the following lines:
if (uri=~"^sip:0[0-9]*@") then {
strip(1);
rewritehostport(172.16.0.101:5060);
if (!t_relay()) {
bla;
bla;
};
);
The router is sending the packet right to the GW, but including the leading
0, so that the call cannot be completed. With version 0.8.10-2 it was
already working. What do I have to change, or is there maybe a small glitch
in the software?
with kind regards
Juergen Peters
Tropico Network
General Manager
Tel. ++504 440-1461
fax. ++504 443-0660
1 Oct
1 Oct
2:25 p.m.
Could you, please, send us message dumps ? I'd like to see the message
ser receives and also the message it sends to the gateway. We use very
similar config file to strip leading characters and it works without any
problems.
You can use ngrep to make the message dumps.
Jan.
On 30-09 21:20, Tropico Network wrote:
Dear Ladies and Gentlemen,
after installing the version 0.8.11 I am facing a strange problem:
In my dialing plan, all numbers starting with a 0 should go to a
PSTN-gateway (172.16.0.101). So I have in my ser.cfg the following lines:
if (uri=~"^sip:0[0-9]*@") then {
strip(1);
rewritehostport(172.16.0.101:5060);
if (!t_relay()) {
bla;
bla;
};
);
The router is sending the packet right to the GW, but including the leading
0, so that the call cannot be completed. With version 0.8.10-2 it was
already working. What do I have to change, or is there maybe a small glitch
in the software?
with kind regards
Juergen Peters
Tropico Network
General Manager
Tel. ++504 440-1461
fax. ++504 443-0660
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
2 Oct
2 Oct
11:01 p.m.
Also, sending the complete config file would help -- the fragment you
are refering to may or may not be one which causes the problem.
-jiri
At 01:25 PM 10/1/2003, Jan Janak wrote:
Could you, please, send us message dumps ? I'd like
to see the message
ser receives and also the message it sends to the gateway. We use very
similar config file to strip leading characters and it works without any
problems.
You can use ngrep to make the message dumps.
Jan.
On 30-09 21:20, Tropico Network wrote:
--
Jiri Kuthan http://iptel.org/~jiri/
Dear Ladies and Gentlemen,
after installing the version 0.8.11 I am facing a strange problem:
In my dialing plan, all numbers starting with a 0 should go to a
PSTN-gateway (172.16.0.101). So I have in my ser.cfg the following lines:
if (uri=~"^sip:0[0-9]*@") then {
strip(1);
rewritehostport(172.16.0.101:5060);
if (!t_relay()) {
bla;
bla;
};
);
The router is sending the packet right to the GW, but including the leading
0, so that the call cannot be completed. With version 0.8.10-2 it was
already working. What do I have to change, or is there maybe a small glitch
in the software?
with kind regards
Juergen Peters
Tropico Network
General Manager
Tel. ++504 440-1461
fax. ++504 443-0660
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7726
days inactive
7727
days old
2 comments
3 participants
participants (3)
-
Jan Janak -
Jiri Kuthan -
Tropico Network