I have configured SER to work with freeradius and restarted SER. Log file shows "Feb 6 02:01:24 TEST ser: ser startup succeeded" but SER is not running. And i am not receving any request in radius server also. Find below my ser.cfg below.

# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/pa.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" #loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/group_radius.so"

loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params -- # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 0)

#modparam("auth_db", "db_url","sql://ser:heslo@localhost/ser") modparam("auth_radius", "radius_config","/etc/radiusclient/radiusclient.conf")

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

modparam("acc", "log_level", 1) #modparam("acc", "log_flag", 1 ) #modparam("acc", "radius_log_flag", 1 ) #modparam("acc", "radius_log_missed_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

if (uri=~"sip:3[0-9]*@sip.test.net") { ## This assumes that the caller is log("Forwarding to PSTN\n"); ## registered in our realm strip(3); forward(192.168.10.15,5060); ## Our Cisco router break; }; setflag(1); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"sip.test.net") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication #if (!radius_www_authorize("sip.test.net", "subscriber")) { if (radius_www_authorize("sip.test.net")) {

www_challenge("sip.test.net", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

Any clue ??? if pls reply me.....

thanks in advance.

regards manu

__________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html