26 Jan
2006
26 Jan
'06
10:31 a.m.
Hi Ramin!
Please always cc to the list
Ramin Dousti wrote:
Thanks, Klaus.
Here is the full picture:
I receive a SIP URI "sip:user@dest" on a UDP socket. The only thing I need to
do
is to proxy this session on a TCP socket to "dest".
I fugured I can do:
forward_tcp(dest);
But when I extract dest into an AVP, forwasrd_tcp does not work with an AVP as
its argument.
avp_printf("s:dst", "$td");
forward_tcp("s:dst");
it tries to resolve "s:dst" literally.
forward_tcp does not support pseudo variables.
try forward_tcp() without parameters.
regards
klaus
If the
destination is stored in an AVP, use avp_pushto
(http://openser.org/docs/modules/1.0.x/avpops.html#AEN291) to push the
new URI into the request URI.
Then use t_relay (make sure the URI contains a transport=tcp parameter).
If the destination is static, use t_relay_to_tcp(ip, port)
http://openser.org/docs/modules/1.0.x/tm.html#AEN320
regards
klaus
Ramin Dousti wrote:
--
Ramin
Hello,
I'm trying to forward a SIP message that's been received by UDP, to
$td through TCP. but the following configuration doesn't work:
send_tcp("$td", 5060 );
or
send_tcp($td, 5060 );
or
avp_printf("s:dst", "$td");
send_tcp("s:dst", 5060 );
Could you please help?
--
Ramin
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
26 Jan
26 Jan
5:16 p.m.
New subject: [Users] forward_tcp
Hi Klaus,
It seems that forward_tcp() requires at least one argument. Any other
suggestions?
BTW, when you said "create a new URI and URI contains a transport=tcp
parameter" what part of the URI contains the transport protocol?
Ramin
On 1/26/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
Hi Ramin!
Please always cc to the list
Ramin Dousti wrote:
--
Ramin
Thanks, Klaus.
Here is the full picture:
I receive a SIP URI "sip:user@dest" on a UDP socket. The only thing I need to
do
is to proxy this session on a TCP socket to "dest".
I fugured I can do:
forward_tcp(dest);
But when I extract dest into an AVP, forwasrd_tcp does not work with an AVP as
its argument.
avp_printf("s:dst", "$td");
forward_tcp("s:dst");
it tries to resolve "s:dst" literally.
forward_tcp does not support pseudo variables.
try forward_tcp() without parameters.
regards
klaus
If the
destination is stored in an AVP, use avp_pushto
(http://openser.org/docs/modules/1.0.x/avpops.html#AEN291) to push the
new URI into the request URI.
Then use t_relay (make sure the URI contains a transport=tcp parameter).
If the destination is static, use t_relay_to_tcp(ip, port)
http://openser.org/docs/modules/1.0.x/tm.html#AEN320
regards
klaus
Ramin Dousti wrote:
--
Ramin
Hello,
I'm trying to forward a SIP message that's been received by UDP, to
$td through TCP. but the following configuration doesn't work:
send_tcp("$td", 5060 );
or
send_tcp($td, 5060 );
or
avp_printf("s:dst", "$td");
send_tcp("s:dst", 5060 );
Could you please help?
--
Ramin
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
5:31 p.m.
New subject: [Users] forward_tcp
Ramin Dousti wrote:
Hi Klaus,
It seems that forward_tcp() requires at least one argument. Any other
suggestions?
BTW, when you said "create a new URI and URI contains a transport=tcp
parameter" what part of the URI contains the transport protocol?
The URI parameter, e.g.
sip:klaus@1.2.3.4:4455;transport=tcp
regards
klaus
Ramin
On 1/26/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
Hi Ramin!
Please always cc to the list
Ramin Dousti wrote:
--
Ramin
Thanks, Klaus.
Here is the full picture:
I receive a SIP URI "sip:user@dest" on a UDP socket. The only thing I need to
do
is to proxy this session on a TCP socket to "dest".
I fugured I can do:
forward_tcp(dest);
But when I extract dest into an AVP, forwasrd_tcp does not work with an AVP as
its argument.
avp_printf("s:dst", "$td");
forward_tcp("s:dst");
it tries to resolve "s:dst" literally.
forward_tcp does not support pseudo variables.
try forward_tcp() without parameters.
regards
klaus
If the
destination is stored in an AVP, use avp_pushto
(http://openser.org/docs/modules/1.0.x/avpops.html#AEN291) to push the
new URI into the request URI.
Then use t_relay (make sure the URI contains a transport=tcp parameter).
If the destination is static, use t_relay_to_tcp(ip, port)
http://openser.org/docs/modules/1.0.x/tm.html#AEN320
regards
klaus
Ramin Dousti wrote:
>Hello,
>
>I'm trying to forward a SIP message that's been received by UDP, to
>$td through TCP. but the following configuration doesn't work:
>
> send_tcp("$td", 5060 );
>or
> send_tcp($td, 5060 );
>or
> avp_printf("s:dst", "$td");
> send_tcp("s:dst", 5060 );
>
>Could you please help?
>
>--
>Ramin
>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
--
Ramin
2 Feb
2 Feb
1:43 p.m.
New subject: [Users] forward_tcp
Ramin Dousti wrote:
Hi Klaus,
It seems that forward_tcp() requires at least one argument. Any other
suggestions?
you can use:
forward_tcp(uri:host);
If you set the dst_uri via avpops, then it will have priority over
request uri.
Cheers,
Daniel
BTW, when you said "create a new URI and URI
contains a transport=tcp
parameter" what part of the URI contains the transport protocol?
Ramin
On 1/26/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
Hi Ramin!
Please always cc to the list
Ramin Dousti wrote:
--
Ramin
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Thanks, Klaus.
Here is the full picture:
I receive a SIP URI "sip:user@dest" on a UDP socket. The only thing I need to
do
is to proxy this session on a TCP socket to "dest".
I fugured I can do:
forward_tcp(dest);
But when I extract dest into an AVP, forwasrd_tcp does not work with an AVP as
its argument.
avp_printf("s:dst", "$td");
forward_tcp("s:dst");
it tries to resolve "s:dst" literally.
forward_tcp does not support pseudo variables.
try forward_tcp() without parameters.
regards
klaus
If the
destination is stored in an AVP, use avp_pushto
(http://openser.org/docs/modules/1.0.x/avpops.html#AEN291) to push the
new URI into the request URI.
Then use t_relay (make sure the URI contains a transport=tcp parameter).
If the destination is static, use t_relay_to_tcp(ip, port)
http://openser.org/docs/modules/1.0.x/tm.html#AEN320
regards
klaus
Ramin Dousti wrote:
> Hello,
>
> I'm trying to forward a SIP message that's been received by UDP, to
> $td through TCP. but the following configuration doesn't work:
>
> send_tcp("$td", 5060 );
> or
> send_tcp($td, 5060 );
> or
> avp_printf("s:dst", "$td");
> send_tcp("s:dst", 5060 );
>
> Could you please help?
>
> --
> Ramin
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
--
Ramin
6871
days inactive
6878
days old
3 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Klaus Darilion -
Ramin Dousti