9 Oct
2007
9 Oct
'07
11:04 a.m.
Hi all,
I've a problem with a CPE/IAD that sometimes send a REGISTER with same
Cseq in the location entry, OpenSER response is "400 Bad Request" with
P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
disable the voice port.
I want disable this kind of check, i've try to set the
modparam("usrloc", "cseq_delay", 0) for disable retrasmission check
but
doesn't work
Any other idea to solve this? i've this problem with only this CPE.
Thanks!
:tele
9 Oct
9 Oct
2:31 p.m.
Hi Tele,
0 value disable the retransmission detection (same cseq), so it is the
opposite of what you are trying to do.
I think the fix should be in the device (as it breaks the RFC) and not
in openser.
regards,
bogdan
tele wrote:
Hi all,
I've a problem with a CPE/IAD that sometimes send a REGISTER with same
Cseq in the location entry, OpenSER response is "400 Bad Request" with
P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
disable the voice port.
I want disable this kind of check, i've try to set the
modparam("usrloc", "cseq_delay", 0) for disable retrasmission check
but
doesn't work
Any other idea to solve this? i've this problem with only this CPE.
Thanks!
:tele
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
2:39 p.m.
Hi,
Thank you bogdan, i will contact the Vendor.
bye
:tele
On Tue, 2007-10-09 at 14:31 +0300, Bogdan-Andrei Iancu wrote:
Hi Tele,
0 value disable the retransmission detection (same cseq), so it is the
opposite of what you are trying to do.
I think the fix should be in the device (as it breaks the RFC) and not
in openser.
regards,
bogdan
tele wrote:
Hi all,
I've a problem with a CPE/IAD that sometimes send a REGISTER with same
Cseq in the location entry, OpenSER response is "400 Bad Request" with
P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
disable the voice port.
I want disable this kind of check, i've try to set the
modparam("usrloc", "cseq_delay", 0) for disable retrasmission check
but
doesn't work
Any other idea to solve this? i've this problem with only this CPE.
Thanks!
:tele
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
2:57 p.m.
Tele:
I've run across similar problems with older sipura ata's and phones. It
seemed the problem started when multiple phones were behind the same NAT
and were using the same default port settings. Changing the port from
say 5060/5061 to 5065/5066 for lines 1/2 of the second phone appeared to
resolve this issue.
Regards,
Norm
tele wrote:
Hi,
Thank you bogdan, i will contact the Vendor.
bye
:tele
On Tue, 2007-10-09 at 14:31 +0300, Bogdan-Andrei Iancu wrote:
Hi Tele,
0 value disable the retransmission detection (same cseq), so it is the
opposite of what you are trying to do.
I think the fix should be in the device (as it breaks the RFC) and not
in openser.
regards,
bogdan
tele wrote:
> Hi all,
>
> I've a problem with a CPE/IAD that sometimes send a REGISTER with same
> Cseq in the location entry, OpenSER response is "400 Bad Request" with
> P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
> disable the voice port.
>
> I want disable this kind of check, i've try to set the
> modparam("usrloc", "cseq_delay", 0) for disable retrasmission
check but
> doesn't work
>
> Any other idea to solve this? i've this problem with only this CPE.
>
> Thanks!
>
> :tele
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
7:04 p.m.
Hi Norm,
Thanks for reporting it. But i think like bogdan the vendor should check
their SIP implementation =)
:tele
On Tue, 2007-10-09 at 07:57 -0400, Norman Brandinger wrote:
Tele:
I've run across similar problems with older sipura ata's and phones. It
seemed the problem started when multiple phones were behind the same NAT
and were using the same default port settings. Changing the port from
say 5060/5061 to 5065/5066 for lines 1/2 of the second phone appeared to
resolve this issue.
Regards,
Norm
tele wrote:
Hi,
Thank you bogdan, i will contact the Vendor.
bye
:tele
On Tue, 2007-10-09 at 14:31 +0300, Bogdan-Andrei Iancu wrote:
Hi Tele,
0 value disable the retransmission detection (same cseq), so it is the
opposite of what you are trying to do.
I think the fix should be in the device (as it breaks the RFC) and not
in openser.
regards,
bogdan
tele wrote:
> Hi all,
>
> I've a problem with a CPE/IAD that sometimes send a REGISTER with same
> Cseq in the location entry, OpenSER response is "400 Bad Request" with
> P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
> disable the voice port.
>
> I want disable this kind of check, i've try to set the
> modparam("usrloc", "cseq_delay", 0) for disable retrasmission
check but
> doesn't work
>
> Any other idea to solve this? i've this problem with only this CPE.
>
> Thanks!
>
> :tele
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6285
days inactive
6285
days old
4 comments
3 participants
participants (3)
-
Bogdan-Andrei Iancu -
Norman Brandinger -
tele