[Users] Openser not able to place calls to sipxezphone, no port mentioned in Contact URI
12 Sep
2006
12 Sep
'06
11:26 a.m.
Hi All,
Need help on resolving the incomign calls problems with sipxezphone which
openser as proxy
sizezphone sends "Contact:" URI as
sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than
sip:<username>@<ipadd>:<port>
For the same reason OpenSER is not able to route the incoming calls to
sipxezphone.
How can I make the sipxezphone(sipxtapi) to send Contact URI with port
number mentioned?
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 232
q :
Call-ID : '5dd7235bc92046fd79bb68788a7f5f55'
CSeq : 1
User-Agent: 'sipXezPhone'
received : ''
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
When I try to do NAT fixing on OpenSER, it records the port from which the
REGISTER message had recieved and tries to send the INVITE message to that
port, in this case 1617 rather than 5060. Actually sipzexphone is listening
on 1617 and 5060 as well which can be found from the below netsta -na output
When I snooped the messages, I found that sipzezphone is sending register
message using port 1617, though the DEFAULT_PORT is 5060
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 171
q :
Call-ID : 'e1102f18dca4dcb81363d75c605632fa'
CSeq : 7
User-Agent: ''
received : 'sip:192.168.101.21:1617'
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
C:\Documents and Settings\Administrator>netstat -na
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2701 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2702 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING
TCP 127.0.0.1:19989 0.0.0.0:0 LISTENING
TCP 192.168.101.21:139 0.0.0.0:0 LISTENING
TCP 192.168.101.21:1501 192.168.101.35:22 ESTABLISHED
TCP 192.168.101.21:1554 192.168.101.21:1555 TIME_WAIT
TCP 192.168.101.21:1615 192.168.101.21:1616 ESTABLISHED
TCP 192.168.101.21:1616 192.168.101.21:1615 ESTABLISHED
TCP 192.168.101.21:1621 192.168.101.35:5060 ESTABLISHED
TCP 192.168.101.21:5060 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1036 *:*
UDP 0.0.0.0:1037 *:*
UDP 0.0.0.0:1100 *:*
UDP 0.0.0.0:1508 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:4573 *:*
UDP 0.0.0.0:4588 *:*
UDP 0.0.0.0:6060 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1038 *:*
UDP 127.0.0.1:1056 *:*
UDP 127.0.0.1:1075 *:*
UDP 127.0.0.1:1105 *:*
UDP 192.168.101.21:123 *:*
UDP 192.168.101.21:137 *:*
UDP 192.168.101.21:138 *:*
UDP 192.168.101.21:1617 *:*
UDP 192.168.101.21:1618 *:*
UDP 192.168.101.21:1619 *:*
UDP 192.168.101.21:1620 *:*
UDP 192.168.101.21:5060 *:*
C:\Documents and Settings\Administrator>
12 Sep
12 Sep
11:43 a.m.
New subject: [Users] openser and 5350
Anybody able to get cisco 5350 register with openser using username and
password.
Am using openser 1.0.1 with mysql authentication. When I try to send calls
from cisco , I get 401 unauthorised.
Have made entries in sip-ua :
authentication username 90557 password 06575A751F1B504C5D42455C28 realm
xxx.xxx.xxx.xxx registrar ipv4:xxx.xxx.xxx.xxx expires 3600
Under dialpeer :
session target ipv4:xxx.xxx.xxx.xxx
Where xxx.xxx.xxx.xxx is the ip address of openser.
Can anyone point out the problem?
Regards
DAN
14 Sep
14 Sep
10:04 a.m.
New subject: [Users] Openser not able to place calls to sipxezphone, no port mentioned in Contact URI
Hi,
missing port in contact is not a problem - if no port is set, the
default 5060 will be used.
regards,
bogdan
Vamsi Pottangi wrote:
Hi All,
Need help on resolving the incomign calls problems with sipxezphone
which openser as proxy
sizezphone sends "Contact:" URI as
sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than
sip:<username>@<ipadd>:<port>
For the same reason OpenSER is not able to route the incoming calls to
sipxezphone.
How can I make the sipxezphone(sipxtapi) to send Contact URI with port
number mentioned?
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21
<mailto:sip:vamsi@192.168.101.21>;LINEID=a9bd64e174dc'
Expires : 232
q :
Call-ID : '5dd7235bc92046fd79bb68788a7f5f55'
CSeq : 1
User-Agent: 'sipXezPhone'
received : ''
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 <http://192.168.101.35:5060> (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
When I try to do NAT fixing on OpenSER, it records the port from which
the REGISTER message had recieved and tries to send the INVITE message
to that port, in this case 1617 rather than 5060. Actually
sipzexphone is listening on 1617 and 5060 as well which can be found
from the below netsta -na output
When I snooped the messages, I found that sipzezphone is sending
register message using port 1617, though the DEFAULT_PORT is 5060
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21
<mailto:sip:vamsi@192.168.101.21>;LINEID=a9bd64e174dc'
Expires : 171
q :
Call-ID : 'e1102f18dca4dcb81363d75c605632fa'
CSeq : 7
User-Agent: ''
received : 'sip:192.168.101.21:1617 <http://192.168.101.21:1617>'
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 <http://192.168.101.35:5060> (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
C:\Documents and Settings\Administrator>netstat -na
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 <http://0.0.0.0:135> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 0.0.0.0:445 <http://0.0.0.0:445> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 0.0.0.0:2701 <http://0.0.0.0:2701> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 0.0.0.0:2702 <http://0.0.0.0:2702> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 0.0.0.0:3389 <http://0.0.0.0:3389> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 0.0.0.0:42510 <http://0.0.0.0:42510> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 127.0.0.1:19989 <http://127.0.0.1:19989> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 192.168.101.21:139 <http://192.168.101.21:139> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
TCP 192.168.101.21:1501 <http://192.168.101.21:1501>
192.168.101.35:22 <http://192.168.101.35:22> ESTABLISHED
TCP 192.168.101.21:1554 <http://192.168.101.21:1554>
192.168.101.21:1555 <http://192.168.101.21:1555> TIME_WAIT
TCP 192.168.101.21:1615 <http://192.168.101.21:1615>
192.168.101.21:1616 <http://192.168.101.21:1616> ESTABLISHED
TCP 192.168.101.21:1616 <http://192.168.101.21:1616>
192.168.101.21:1615 <http://192.168.101.21:1615> ESTABLISHED
TCP 192.168.101.21:1621 <http://192.168.101.21:1621>
192.168.101.35:5060 <http://192.168.101.35:5060> ESTABLISHED
TCP 192.168.101.21:5060 <http://192.168.101.21:5060> 0.0.0.0:0
<http://0.0.0.0:0> LISTENING
UDP 0.0.0.0:445 <http://0.0.0.0:445> *:*
UDP 0.0.0.0:500 <http://0.0.0.0:500> *:*
UDP 0.0.0.0:1036 <http://0.0.0.0:1036> *:*
UDP 0.0.0.0:1037 <http://0.0.0.0:1037> *:*
UDP 0.0.0.0:1100 <http://0.0.0.0:1100> *:*
UDP 0.0.0.0:1508 <http://0.0.0.0:1508> *:*
UDP 0.0.0.0:4500 <http://0.0.0.0:4500> *:*
UDP 0.0.0.0:4573 <http://0.0.0.0:4573> *:*
UDP 0.0.0.0:4588 <http://0.0.0.0:4588> *:*
UDP 0.0.0.0:6060 <http://0.0.0.0:6060> *:*
UDP 127.0.0.1:123 <http://127.0.0.1:123> *:*
UDP 127.0.0.1:1038 <http://127.0.0.1:1038> *:*
UDP 127.0.0.1:1056 <http://127.0.0.1:1056> *:*
UDP 127.0.0.1:1075 <http://127.0.0.1:1075> *:*
UDP 127.0.0.1:1105 <http://127.0.0.1:1105> *:*
UDP 192.168.101.21:123 <http://192.168.101.21:123> *:*
UDP 192.168.101.21:137 <http://192.168.101.21:137> *:*
UDP 192.168.101.21:138 <http://192.168.101.21:138> *:*
UDP 192.168.101.21:1617 <http://192.168.101.21:1617> *:*
UDP 192.168.101.21:1618 <http://192.168.101.21:1618> *:*
UDP 192.168.101.21:1619 <http://192.168.101.21:1619> *:*
UDP 192.168.101.21:1620 <http://192.168.101.21:1620> *:*
UDP 192.168.101.21:5060 <http://192.168.101.21:5060> *:*
C:\Documents and Settings\Administrator>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
10:24 a.m.
Hello Vamsi
When U using the Behind the NAT or inside,
Default port no is 5060,
For UAC or UAS's it may b/w include the RTP port 1024 to 65000 , openser
is forwarding these ports,
On 9/12/06, Vamsi Pottangi <vamsipottangi(a)gmail.com> wrote:
Hi All,
Need help on resolving the incomign calls problems with sipxezphone which
openser as proxy
sizezphone sends "Contact:" URI as
sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than
sip:<username>@<ipadd>:<port>
For the same reason OpenSER is not able to route the incoming calls to
sipxezphone.
How can I make the sipxezphone(sipxtapi) to send Contact URI with port
number mentioned?
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 232
q :
Call-ID : '5dd7235bc92046fd79bb68788a7f5f55'
CSeq : 1
User-Agent: 'sipXezPhone'
received : ''
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
When I try to do NAT fixing on OpenSER, it records the port from which the
REGISTER message had recieved and tries to send the INVITE message to that
port, in this case 1617 rather than 5060. Actually sipzexphone is listening
on 1617 and 5060 as well which can be found from the below netsta -na output
When I snooped the messages, I found that sipzezphone is sending register
message using port 1617, though the DEFAULT_PORT is 5060
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 171
q :
Call-ID : 'e1102f18dca4dcb81363d75c605632fa'
CSeq : 7
User-Agent: ''
received : 'sip:192.168.101.21:1617'
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
C:\Documents and Settings\Administrator>netstat -na
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2701 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2702 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING
TCP 127.0.0.1:19989 0.0.0.0:0 LISTENING
TCP 192.168.101.21:139 0.0.0.0:0 LISTENING
TCP 192.168.101.21:1501 192.168.101.35:22 ESTABLISHED
TCP 192.168.101.21:1554 192.168.101.21:1555 TIME_WAIT
TCP 192.168.101.21:1615 192.168.101.21:1616 ESTABLISHED
TCP 192.168.101.21:1616 192.168.101.21:1615 ESTABLISHED
TCP 192.168.101.21:1621 192.168.101.35:5060 ESTABLISHED
TCP 192.168.101.21:5060 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1036 *:*
UDP 0.0.0.0:1037 *:*
UDP 0.0.0.0:1100 *:*
UDP 0.0.0.0:1508 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:4573 *:*
UDP 0.0.0.0:4588 *:*
UDP 0.0.0.0:6060 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1038 *:*
UDP 127.0.0.1:1056 *:*
UDP 127.0.0.1:1075 *:*
UDP 127.0.0.1:1105 *:*
UDP 192.168.101.21:123 *:*
UDP 192.168.101.21:137 *:*
UDP 192.168.101.21:138 *:*
UDP 192.168.101.21:1617 *:*
UDP 192.168.101.21:1618 *:*
UDP 192.168.101.21:1619 *:*
UDP 192.168.101.21:1620 *:*
UDP 192.168.101.21:5060 *:*
C:\Documents and Settings\Administrator>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards with cheers
Sunkara Ravi Prakash (Voip Developer)
Hyperion Technology
www.hyperion-tech.com
+91-9985077535
10:51 a.m.
Hi bogdan and ravi,
Thaks for your replies, I narrowed the problem to be sipXtapi related and
not with OpenSER.
Regards,
~Vamsi
On 9/14/06, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> wrote:
Hello Vamsi
When U using the Behind the NAT or inside,
Default port no is 5060,
For UAC or UAS's it may b/w include the RTP port 1024 to 65000 , openser
is forwarding these ports,
On 9/12/06, Vamsi Pottangi <vamsipottangi(a)gmail.com> wrote:
Hi All,
Need help on resolving the incomign calls problems with sipxezphone
which openser as proxy
sizezphone sends "Contact:" URI as
sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than
sip:<username>@<ipadd>:<port>
For the same reason OpenSER is not able to route the incoming calls to
sipxezphone.
How can I make the sipxezphone(sipxtapi) to send Contact URI with port
number mentioned?
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : ' sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 232
q :
Call-ID : '5dd7235bc92046fd79bb68788a7f5f55'
CSeq : 1
User-Agent: 'sipXezPhone'
received : ''
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
When I try to do NAT fixing on OpenSER, it records the port from which
the REGISTER message had recieved and tries to send the INVITE message to
that port, in this case 1617 rather than 5060. Actually sipzexphone is
listening on 1617 and 5060 as well which can be found from the below netsta
-na output
When I snooped the messages, I found that sipzezphone is sending
register message using port 1617, though the DEFAULT_PORT is 5060
~~~Contact(0xb60deb38)~~~
domain : 'location'
aor : 'vamsi'
Contact : ' sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc'
Expires : 171
q :
Call-ID : 'e1102f18dca4dcb81363d75c605632fa'
CSeq : 7
User-Agent: ''
received : 'sip: 192.168.101.21:1617'
Path : ''
State : CS_SYNC
Flags : 0
Sock : 192.168.101.35:5060 (0x8145be8)
Methods : 4294967295
next : (nil)
prev : (nil)
~~~/Contact~~~~
C:\Documents and Settings\Administrator>netstat -na
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2701 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2702 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING
TCP 127.0.0.1:19989 0.0.0.0:0 LISTENING
TCP 192.168.101.21:139 0.0.0.0:0 LISTENING
TCP 192.168.101.21:1501 192.168.101.35:22 ESTABLISHED
TCP 192.168.101.21:1554 192.168.101.21:1555 TIME_WAIT
TCP 192.168.101.21:1615 192.168.101.21:1616 ESTABLISHED
TCP 192.168.101.21:1616 192.168.101.21:1615 ESTABLISHED
TCP 192.168.101.21:1621 192.168.101.35:5060 ESTABLISHED
TCP 192.168.101.21:5060 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1036 *:*
UDP 0.0.0.0:1037 *:*
UDP 0.0.0.0:1100 *:*
UDP 0.0.0.0:1508 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:4573 *:*
UDP 0.0.0.0:4588 *:*
UDP 0.0.0.0:6060 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1038 *:*
UDP 127.0.0.1:1056 *:*
UDP 127.0.0.1:1075 *:*
UDP 127.0.0.1:1105 *:*
UDP 192.168.101.21:123 *:*
UDP 192.168.101.21:137 *:*
UDP 192.168.101.21:138 *:*
UDP 192.168.101.21:1617 *:*
UDP 192.168.101.21:1618 *:*
UDP 192.168.101.21:1619 *:*
UDP 192.168.101.21:1620 *:*
UDP 192.168.101.21:5060 *:*
C:\Documents and Settings\Administrator>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards with cheers
Sunkara Ravi Prakash (Voip Developer)
Hyperion Technology
www.hyperion-tech.com
+91-9985077535
6516
days inactive
6518
days old
4 comments
4 participants
participants (4)
-
Bogdan-Andrei Iancu -
Dan -
raviprakash sunkara -
Vamsi Pottangi