Hi Steve!
Now it works properly. Like you wrote the port command was missed in the dial peer.
dial-peer voice 1 pots description Default-Dial-peer fuer ausgehende Anrufe preference 3 service session max-conn 25 destination-pattern 0T progress_ind alert enable 8 direct-inward-dial port 0/0/1:15
Now I have activated the www_authorize section.
# Uncomment this if you want to use digest authentication if (!www_authorize("netuse.de", "subscriber")) { www_challenge("netuse.de", "1"); break; };
On my cisco I see following when I enable the ccsip debugging:
Apr 21 09:24:52.933 MEST: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 192.168.254.30:5060 Apr 21 09:24:52.933 MEST: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000 Apr 21 09:24:52.933 MEST: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Received: SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.254.203:5060;branch=z9hG4bK2924EA From: "0*" sip:0*@192.168.254.30;tag=E7AF75C-13AE To: "0*" sip:0*@192.168.254.30;tag=b27e1a1d33761e85846fc98f5f3a7e58.2283 Call-ID: E1A23104-B0DA11D9-81B582BA-75F29624 CSeq: 42 REGISTER WWW-Authenticate: Digest realm="netuse.de", nonce="426756705993d4a9785e2e828158f76faa5234d4", qop="auth" Server: Sip EXpress router (0.9.0 (sparc64/solaris)) Content-Length: 0 Warning: 392 192.168.254.30:5060 "Noisy feedback tells: pid=16087 req_src_ip=192.168.254.203 req_src_port=52773 in_uri=sip:192.168.254.30:5060 out_uri=sip:192.168.254.30:5060 via_cnt==1"
Apr 21 09:24:52.933 MEST: //-1/000000000000/SIP/Error/sipSPIHandleAuthChallenge: Error getting credentials Apr 21 09:24:52.933 MEST: //-1/000000000000/SIP/Info/sipSPIUdeleteCcbFromUACTable: ****Deleting from UAC table. Apr 21 09:24:52.933 MEST: //-1/000000000000/SIP/Info/sipSPIUdeleteCcbFromTable: Deleting from table. ccb=0x45D7009C key=E1A23104-B0DA11D9-81B582BA-75F29624 Apr 21 09:24:52.933 MEST: //-1/000000000000/SIP/Info/sipSPIFlushEventBufferQueue: There are 0 events on the internal queue that are going to be free'd Apr 21 09:24:52.933 MEST: //-1/000000000000/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 45D7009C
It looks like the cisco tries to registering to the server, but the server decline this.
How can I enable the registering of my gateway in ser, without to disable the www_authorize ?
Regards, Ahmad
On Apr 20, 05, Steve Blair wrote:
Ahmad Cheikh Moussa wrote:
Hi!
Can I ask you some questions? How do I know, that my ser server only act as registrar and redirect Server ? With redirect I mean, any other calls, which starts with 0, redirect to the gateway.
I'm not sure I understand. Are you concerned about people outside of your user community routing calls through your proxy and out to the PSTN? If so then you need to use check_from and check_to to determine if the caller is authenticated to your proxy.
I have following line in ser.cfg t_relay_to_udp("192.168.254.203", "5060"); when I understand you right, then I have to change this paramater to sl_relay_to_udp("192.168.254.203", "5060");
No, the t_relay is fine.
This would mean stateless forwarding to this gateway ? correct ?
Regars, Ahmad
--
ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001fax: 215-898-9348
sip:blairs@upenn.edu
-
Ahmad Cheikh-Moussa