14 May
2021
14 May
'21
4:52 p.m.
Hi
Using Kamailio 5.4.4 on Debian Buster. I am trying to get feedback of
the MOS scores at call end. However the variables are always <null>.
I have the modparams set as follows:
# ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock",
"udp:localhost:2223")
modparam("rtpengine", "rtpengine_disable_tout", -1)
modparam("rtpengine", "rtpengine_tout_ms", 2000)
modparam("rtpengine", "rtpengine_allow_op", 1)
modparam("rtpengine", "mos_min_pv", "$avp(s:mos_min)")
modparam("rtpengine", "mos_max_pv", "$avp(s:mos_max)")
modparam("rtpengine", "mos_average_pv", "$avp(s:mos_avg)")
modparam("rtpengine", "mos_average_packetloss_pv",
"$avp(s:mos_avg_packetloss)")
modparam("rtpengine", "mos_average_jitter_pv",
"$avp(s:mos_avg_jitter)")
modparam("rtpengine", "mos_average_roundtrip_pv",
"$avp(s:mos_avg_roundtrip)")
I am trying to log the values from within the dialog:end event_route:
event_route[dialog:end] {
rtpengine_delete();
xlog("L_INFO","mos_avg=$avp(mos_avg),
packetloss_avg=$avp(mos_avg_packetloss),
jitter_avg=$avp(mos_avg_jitter), latency_avg=$avp(mos_avg_roundtrip),
sip_last_reply=$rs - $ci\n");
return;
}
Am I missing something? I have tried rtpengine_query and
rtpengine_manage in place of the _delete and also tried placing this in
the BYE handling section of WITHIN_DIALOG but no joy.
Any assistance much appreciated!
-Barry
--
-Barry
14 May
14 May
5:47 p.m.
I don't know if it matters, but in modparams you prefix the avp names
with "s:", and don't do it in the xlog call.
-- Juha
5:56 p.m.
For what it's worth, I have tried this as well and had the same result
as Barry.
I gave up.
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
6:03 p.m.
To Barry: I have never shown any mos code for copying. So you must
have mixed people up.
I have never used dialog module, since I don't believe it is the job of
sip proxy to deal with dialogs.
I just did a simple test where placed the xinfo call after
rtpengine_delete() call and got to syslog:
May 14 17:59:01 lohi /usr/bin/sip-proxy[29816]: INFO: ===== rtpengine_delete()
May 14 17:59:01 lohi /usr/bin/sip-proxy[29816]: INFO: mos_avg=4.3 packetloss_avg=0
jitter_avg=4 roudtrip_avg=6814
-- Juha
6:08 p.m.
Are your RTP clients sending RTCP? MOS calculation depends on RTCP. You
can look in rtpengine's log, at the end of the call the MOS score is
logged together with other stream stats.
In more recent versions of rtpengine you can enable local RTCP
generation and this should give you stats even if the clients don't send
RTCP.
Cheers
On 14/05/2021 09.52, [ EXT ] Barry Flanagan wrote:
Hi
Using Kamailio 5.4.4 on Debian Buster. I am trying to get feedback of
the MOS scores at call end. However the variables are always <null>.
I have the modparams set as follows:
# ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock",
"udp:localhost:2223")
modparam("rtpengine", "rtpengine_disable_tout", -1)
modparam("rtpengine", "rtpengine_tout_ms", 2000)
modparam("rtpengine", "rtpengine_allow_op", 1)
modparam("rtpengine", "mos_min_pv", "$avp(s:mos_min)")
modparam("rtpengine", "mos_max_pv", "$avp(s:mos_max)")
modparam("rtpengine", "mos_average_pv", "$avp(s:mos_avg)")
modparam("rtpengine", "mos_average_packetloss_pv",
"$avp(s:mos_avg_packetloss)")
modparam("rtpengine", "mos_average_jitter_pv",
"$avp(s:mos_avg_jitter)")
modparam("rtpengine", "mos_average_roundtrip_pv",
"$avp(s:mos_avg_roundtrip)")
I am trying to log the values from within the dialog:end event_route:
event_route[dialog:end] {
rtpengine_delete();
xlog("L_INFO","mos_avg=$avp(mos_avg),
packetloss_avg=$avp(mos_avg_packetloss),
jitter_avg=$avp(mos_avg_jitter), latency_avg=$avp(mos_avg_roundtrip),
sip_last_reply=$rs - $ci\n");
return;
}
Am I missing something? I have tried rtpengine_query and
rtpengine_manage in place of the _delete and also tried placing this
in the BYE handling section of WITHIN_DIALOG but no joy.
Any assistance much appreciated!
-Barry
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
6:57 p.m.
Hi Richard!
On 14/05/2021 16:08, Richard Fuchs wrote:
Are your RTP clients sending RTCP? MOS calculation
depends on RTCP.
You can look in rtpengine's log, at the end of the call the MOS score
is logged together with other stream stats.
OK, this could be the issue. I don't control the clients here.
In more recent versions of rtpengine you can enable
local RTCP
generation and this should give you stats even if the clients don't
send RTCP.
I am running rtpengine 8.5.3.2 - how would I enable this feature or what
version would I need?
Thanks
-Barry
Cheers
On 14/05/2021 09.52, [ EXT ] Barry Flanagan wrote:
--
-Barry
Hi
Using Kamailio 5.4.4 on Debian Buster. I am trying to get feedback of
the MOS scores at call end. However the variables are always <null>.
I have the modparams set as follows:
# ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock",
"udp:localhost:2223")
modparam("rtpengine", "rtpengine_disable_tout", -1)
modparam("rtpengine", "rtpengine_tout_ms", 2000)
modparam("rtpengine", "rtpengine_allow_op", 1)
modparam("rtpengine", "mos_min_pv", "$avp(s:mos_min)")
modparam("rtpengine", "mos_max_pv", "$avp(s:mos_max)")
modparam("rtpengine", "mos_average_pv", "$avp(s:mos_avg)")
modparam("rtpengine", "mos_average_packetloss_pv",
"$avp(s:mos_avg_packetloss)")
modparam("rtpengine", "mos_average_jitter_pv",
"$avp(s:mos_avg_jitter)")
modparam("rtpengine", "mos_average_roundtrip_pv",
"$avp(s:mos_avg_roundtrip)")
I am trying to log the values from within the dialog:end event_route:
event_route[dialog:end] {
rtpengine_delete();
xlog("L_INFO","mos_avg=$avp(mos_avg),
packetloss_avg=$avp(mos_avg_packetloss),
jitter_avg=$avp(mos_avg_jitter), latency_avg=$avp(mos_avg_roundtrip),
sip_last_reply=$rs - $ci\n");
return;
}
Am I missing something? I have tried rtpengine_query and
rtpengine_manage in place of the _delete and also tried placing this
in the BYE handling section of WITHIN_DIALOG but no joy.
Any assistance much appreciated!
-Barry
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
*sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7:04 p.m.
On 14/05/2021 11.57, [ EXT ] Barry Flanagan wrote:
This is available from 9.2 onwards. Simply add `generate-RTCP` to your
offer or answer flags and this will switch from RTCP passthrough to
locally generated RTCP for that call.
Cheers
In more recent versions of rtpengine you can enable local RTCP
generation and this should give you stats even if the clients don't
send RTCP.
I am running rtpengine 8.5.3.2 - how would I enable this feature or
what version would I need?
7:06 p.m.
On 14/05/2021 17:04, Richard Fuchs wrote:
On 14/05/2021 11.57, [ EXT ] Barry Flanagan wrote:
This is available from 9.2 onwards. Simply add `generate-RTCP` to your
offer or answer flags and this will switch from RTCP passthrough to
locally generated RTCP for that call.
OK, great. That might be just what is required.
Many thanks.
-Barry
In more recent versions of rtpengine you can enable local RTCP
generation and this should give you stats even if the clients don't
send RTCP.
I am running rtpengine 8.5.3.2 - how would I enable this feature or
what version would I need?
Cheers
--
-Barry
12:26 p.m.
On 17/05/2021 06:57, Hans-Jürgen Brand wrote:
Hello Barry,
maybe this helps a littel.
https://telecom.altanai.com/2018/04/17/voip-call-metric-monitoring/
Thanks for that. Useful document. Hopefully the "generate-RTCP" flag
Richard advised will do the trick.
-Barry
1285
days inactive
1288
days old
10 comments
5 participants
participants (5)
-
Alex Balashov -
Barry Flanagan -
Hans-Jürgen Brand -
Juha Heinanen -
Richard Fuchs