29 May
2008
29 May
'08
6:45 p.m.
Hi Eric,
To be honest, no, I haven;t, because I do not have access to such a
machine. Could you post the errors you get now?
Regards,
Bogdan
wliangy(a)gmail.com wrote:
Thanks!
But there is still problem.
May I ask whether you have compiled successfully on Solaris 8 or 10?
2008/5/26 Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>ro>:
Hi Eric,
use "gmake" and not "make" on Solaris.
Regards,
Bogdan
wliangy(a)gmail.com wrote:
Hi experts,
I am start user of openser and need use openser to support sctp.
now I have download the source codes of openser-1.3.1-tls.
then I compiled it, there have many errors that need your supports.
e.g.
openser-1.3.1-tls> make all
Makefile.defs:717: *** missing separator. Stop.
then I commented Makefile.defs line717 and 718.
# $(warning Old gcc detected ($(CC_SHORTVER)), use
gcc >= 3.1 \
# for better results)
Errors were still there.
openser-1.3.1-tls> make all
Makefile:402: warning: overriding commands for target
`/opt/CiscoMGC$(DESTDIR)'
Makefile:393: warning: ignoring old commands for target
`/opt/CiscoMGC$(DESTDIR)'
yacc -d -b cfg cfg.y
"cfg.y", line 391: warning: redeclaration of precedence of SLASH.
conflicts: 1 shift/reduce
flex cfg.lex
statistics.c:58: warning: #warning STATISTICS: Architecture with no
support for atomic operations. Using Locks!!
Makefile:402: warning: overriding commands for target
`/opt/CiscoMGC$(DESTDIR)'
Makefile:393: warning: ignoring old commands for target
`/opt/CiscoMGC$(DESTDIR)'
Compiling action.c
gcc -g -O9 -funroll-loops -Wall -mv8 -DNAME='"openser"'
-DVERSION='"1.3.1-notls"' -DARCH='"sparc64"'
-DOS='"solaris"'
-DCOMPILER='"gcc 2.91.66"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"$(DESTDIR)/etc/openser/"' -DPKG_MALLOC -DSHM_MEM
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
-DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD
-DHAVE_ALLOCA_H -DUSE_SIGACTION -D_POSIX_PTHREAD_SEMANTICS
-DHAVE_DEVPOLL -DHAVE_SELECT -c action.c -o action.o
parser/msg_parser.h: In function `char_msg_val':
In file included from action.h:27,
from action.c:44:
parser/msg_parser.h:300: parse error before `)'
forward.h: In function `msg_send':
In file included from action.c:49:
forward.h:95: parse error before `)'
forward.h:103: parse error before `)'
forward.h:107: parse error before `)'
mem/../lock_alloc.h: In function `lock_set_alloc':
In file included from mem/../locking.h:66,
from mem/../statistics.h:115,
from mem/shm_mem.h:33,
from ut.h:52,
from action.c:54:
mem/../lock_alloc.h:68: parse error before `)'
ut.h: In function `int2bstr':
In file included from action.c:54:
ut.h:172: parse error before `)'
ut.h: In function `un_escape':
ut.h:365: parse error before `)'
ut.h: In function `shm_str_dup':
ut.h:498: parse error before `)'
ut.h: In function `pkg_str_dup':
ut.h:515: parse error before `)'
ut.h: In function `str_strcmp':
ut.h:532: parse error before `)'
ut.h:535: parse error before `int'
ut.h:539: `minlen' undeclared (first use in this function)
ut.h:539: (Each undeclared identifier is reported only once
ut.h:539: for each function it appears in.)
ut.h:547: `alen' undeclared (first use in this function)
ut.h:547: `blen' undeclared (first use in this function)
ut.h: In function `str_strcasecmp':
ut.h:563: parse error before `)'
ut.h:566: parse error before `int'
ut.h:570: `minlen' undeclared (first use in this function)
ut.h:578: `alen' undeclared (first use in this function)
ut.h:578: `blen' undeclared (first use in this function)
action.c: In function `run_action_list':
action.c:140: parse error before `)'
action.c: In function `do_assign':
action.c:193: parse error before `)'
action.c:202: parse error before `)'
action.c:222: parse error before `)'
action.c:228: parse error before `)'
action.c: In function `do_action':
action.c:302: parse error before `)'
action.c:309: parse error before `)'
action.c:335: parse error before `)'
action.c:498: parse error before `)'
action.c:524: parse error before `)'
action.c:682: parse error before `)'
action.c:710: parse error before `)'
action.c:723: parse error before `)'
action.c:757: parse error before `)'
action.c:763: parse error before `)'
action.c:807: parse error before `)'
action.c:819: parse error before `)'
action.c:870: parse error before `)'
action.c:896: parse error before `)'
action.c:904: parse error before `)'
action.c:930: parse error before `)'
action.c:939: parse error before `)'
action.c:945: parse error before `)'
action.c:966: parse error before `)'
make: *** [action.o] Error 1
Your any help is much appreciated!
BR,
Eric
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
29 May
29 May
11:42 p.m.
New subject: [OpenSER-Users] compilation on solaris 10
Hi Eric.
Besides, I am seeing you are using a very old version of GCC; could
you update it, to at least gcc 3.*?
Regards.
Sergio Gutiérrez.
On Thu, May 29, 2008 at 10:45 AM, Bogdan-Andrei Iancu
<bogdan(a)voice-system.ro> wrote:
Hi Eric,
To be honest, no, I haven;t, because I do not have access to such a
machine. Could you post the errors you get now?
Regards,
Bogdan
wliangy(a)gmail.com wrote:
Thanks!
But there is still problem.
May I ask whether you have compiled successfully on Solaris 8 or 10?
2008/5/26 Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>ro>:
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hi Eric,
use "gmake" and not "make" on Solaris.
Regards,
Bogdan
wliangy(a)gmail.com wrote:
Hi experts,
I am start user of openser and need use openser to support sctp.
now I have download the source codes of openser-1.3.1-tls.
then I compiled it, there have many errors that need your supports.
e.g.
openser-1.3.1-tls> make all
Makefile.defs:717: *** missing separator. Stop.
then I commented Makefile.defs line717 and 718.
# $(warning Old gcc detected ($(CC_SHORTVER)), use
gcc >= 3.1 \
# for better results)
Errors were still there.
openser-1.3.1-tls> make all
Makefile:402: warning: overriding commands for target
`/opt/CiscoMGC$(DESTDIR)'
Makefile:393: warning: ignoring old commands for target
`/opt/CiscoMGC$(DESTDIR)'
yacc -d -b cfg cfg.y
"cfg.y", line 391: warning: redeclaration of precedence of SLASH.
conflicts: 1 shift/reduce
flex cfg.lex
statistics.c:58: warning: #warning STATISTICS: Architecture with no
support for atomic operations. Using Locks!!
Makefile:402: warning: overriding commands for target
`/opt/CiscoMGC$(DESTDIR)'
Makefile:393: warning: ignoring old commands for target
`/opt/CiscoMGC$(DESTDIR)'
Compiling action.c
gcc -g -O9 -funroll-loops -Wall -mv8 -DNAME='"openser"'
-DVERSION='"1.3.1-notls"' -DARCH='"sparc64"'
-DOS='"solaris"'
-DCOMPILER='"gcc 2.91.66"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"$(DESTDIR)/etc/openser/"' -DPKG_MALLOC -DSHM_MEM
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
-DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD
-DHAVE_ALLOCA_H -DUSE_SIGACTION -D_POSIX_PTHREAD_SEMANTICS
-DHAVE_DEVPOLL -DHAVE_SELECT -c action.c -o action.o
parser/msg_parser.h: In function `char_msg_val':
In file included from action.h:27,
from action.c:44:
parser/msg_parser.h:300: parse error before `)'
forward.h: In function `msg_send':
In file included from action.c:49:
forward.h:95: parse error before `)'
forward.h:103: parse error before `)'
forward.h:107: parse error before `)'
mem/../lock_alloc.h: In function `lock_set_alloc':
In file included from mem/../locking.h:66,
from mem/../statistics.h:115,
from mem/shm_mem.h:33,
from ut.h:52,
from action.c:54:
mem/../lock_alloc.h:68: parse error before `)'
ut.h: In function `int2bstr':
In file included from action.c:54:
ut.h:172: parse error before `)'
ut.h: In function `un_escape':
ut.h:365: parse error before `)'
ut.h: In function `shm_str_dup':
ut.h:498: parse error before `)'
ut.h: In function `pkg_str_dup':
ut.h:515: parse error before `)'
ut.h: In function `str_strcmp':
ut.h:532: parse error before `)'
ut.h:535: parse error before `int'
ut.h:539: `minlen' undeclared (first use in this function)
ut.h:539: (Each undeclared identifier is reported only once
ut.h:539: for each function it appears in.)
ut.h:547: `alen' undeclared (first use in this function)
ut.h:547: `blen' undeclared (first use in this function)
ut.h: In function `str_strcasecmp':
ut.h:563: parse error before `)'
ut.h:566: parse error before `int'
ut.h:570: `minlen' undeclared (first use in this function)
ut.h:578: `alen' undeclared (first use in this function)
ut.h:578: `blen' undeclared (first use in this function)
action.c: In function `run_action_list':
action.c:140: parse error before `)'
action.c: In function `do_assign':
action.c:193: parse error before `)'
action.c:202: parse error before `)'
action.c:222: parse error before `)'
action.c:228: parse error before `)'
action.c: In function `do_action':
action.c:302: parse error before `)'
action.c:309: parse error before `)'
action.c:335: parse error before `)'
action.c:498: parse error before `)'
action.c:524: parse error before `)'
action.c:682: parse error before `)'
action.c:710: parse error before `)'
action.c:723: parse error before `)'
action.c:757: parse error before `)'
action.c:763: parse error before `)'
action.c:807: parse error before `)'
action.c:819: parse error before `)'
action.c:870: parse error before `)'
action.c:896: parse error before `)'
action.c:904: parse error before `)'
action.c:930: parse error before `)'
action.c:939: parse error before `)'
action.c:945: parse error before `)'
action.c:966: parse error before `)'
make: *** [action.o] Error 1
Your any help is much appreciated!
BR,
Eric
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
30 May
30 May
2:09 p.m.
New subject: [OpenSER-Users] compilation on solaris 10
On Thursday 29 May 2008, Sergio Gutierrez wrote:
Hi Eric.
Besides, I am seeing you are using a very old version of GCC; could
you update it, to at least gcc 3.*?
Hi,
i think this is at least part of the problem here. I don't think that openSER
gets a sufficient testing on this compiler anymore.
Cheers,
Henning
3 Jun
3 Jun
4:25 p.m.
New subject: [OpenSER-Users] compilation on solaris 10
Hi Henning,
I second this statement - unfortunately, after SF closed the compiling
farm, I have no platform and compiler to run tests on.....maybe some
support from the community (for offering access to different archs and
compilers) will be helpful here.
Best regards,
Bogdan
Henning Westerholt wrote:
On Thursday 29 May 2008, Sergio Gutierrez wrote:
Hi Eric.
Besides, I am seeing you are using a very old version of GCC; could
you update it, to at least gcc 3.*?
Hi,
i think this is at least part of the problem here. I don't think that openSER
gets a sufficient testing on this compiler anymore.
Cheers,
Henning
4 Jun
4 Jun
8:08 a.m.
New subject: [OpenSER-Users] compilation on solaris 10
Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
I second this statement - unfortunately, after SF
closed the
compiling farm, I have no platform and compiler to run tests
on.....maybe some support from the community (for offering access to
different archs and compilers) will be helpful here.
Is this useful?
http://en.opensuse.org/Build_Service
--
Don't you wish you had more energy... or less ambition?
9DB8FF06 : CB80 0BA6 7D13 B10A 6FBB D43E B4D2 28AD 9DB8 FF06
11:35 a.m.
New subject: [OpenSER-Users] compilation on solaris 10
On Wednesday 04 June 2008, Sajith T S wrote:
Hi,
this is already used to build openser packages, i think. But they don't
support solaris at the moment, so for this purpose, its not useful.
Cheers,
Henning
I second this
statement - unfortunately, after SF closed the
compiling farm, I have no platform and compiler to run tests
on.....maybe some support from the community (for offering access to
different archs and compilers) will be helpful here.
Is this useful?
http://en.opensuse.org/Build_Service
6015
days inactive
6021
days old
5 comments
4 participants
participants (4)
-
Bogdan-Andrei Iancu -
Henning Westerholt -
Sajith T S -
Sergio Gutierrez