Hi Zeus,
Yes, my SER is running behind netscreen firewall + NAT
and has a public IP address (202.129.171.223). I have
enable all outoing port and limited incoming port
(5004 and 5005). Which is running in the company I
work for.
The UAs is running at home which is behind my NETGEAR
router, if I do a port fowarding on my NETGEAR router
to forward 5004 to my grandstream (129.168.0.3) then I
can hear the voice. But I can't hear the echo.
I have try to call home from the office (X-lite to
grandstream), but only one direction can hear, the UA
at home can hear the voice but UA in my office can't
the the voice.
Like you said, properly is the voice is block by the
NAT. But I give you another sinareo, if I turn on the
port forwarding, I call talk to another UA which has
public IP address (connected to another ADSL line).
Please advice, C.K
--- Zeus Ng <zeus.ng(a)isquare.com.au> wrote:
C.K.,
I notice that your SER is behind a NAT (I assume),
not just a firewall. From
my experience, SER will only function properly if it
has a public IP. PAT or
NAT for SER will not work. I don't know how you get
around it. Are you
running it in your lab? Forgive me but I would say
that it will not work in
a real world environment.
Regards,
Zeus
-----Original Message-----
From: C.K [mailto:ckng128@yahoo.com]
Sent: Saturday, 21 August 2004 9:17 AM
To: Zeus Ng
Subject: RE: [Serusers] Asterisk inside a NAT,
client inside
ANOTHER NAT
Hi Zeus, Attach is my ngrep.log, please give me
some
guideline.
Many thanks