3 Apr
2023
3 Apr
'23
3:58 p.m.
Hello all,
In my situation, it is possible to call forwarding to registered users
multiple times on same leg. For each forward i have to update To uri and
i am using uac_replace_to to do that.
But on second relaying, To uri was malformed. On below, Im attaching
configuration to illustrate my problem. (version-5.4.9)
First relay - /To: //sip:xyz@192.168.0.51/
Second relay - /To: sip:xyz@192.168.0.51sip:abc@192.168.0.51/
Thanks in advance.
Serdar
/loadmodule "uac.so"//
//modparam("uac","restore_mode","auto")//
//
//
//request_route {//
// ...//
// $avp(x) = "abc";//
// $avp(x) = "xyz";//
// $avp(myip) = "192.168.0.51";//
// $avp(i) = 0;//
// route(SERDAR);//
// ...//
//}//
//
//route[SERDAR] {//
// if ($(avp(x)[$avp(i)])!=$null) {//
// $avp(destination) = $(avp(x)[$avp(i)]);//
// $avp(i) = $avp(i) + 1;//
// $rU=$_s($avp(destination));//
//uac_replace_to("$_s(sip:$avp(destination)@$avp(myip))");//
// route(LOCATION);//
// } else {//
// send_reply("403", "Opps!");//
// exit;//
// }//
//}//
//
//route[LOCATION] {//
// $avp(oexten) = $rU;//
// if (!lookup("location") ) {//
// t_newtran();//
// switch ($var(rc)) {//
// case -1://
// case -3://
// send_reply("480", "Temporarily Unavailable");//
// exit;//
// case -2://
// send_reply("405", "Method Not Allowed");//
// exit;//
// }//
// }//
// t_on_failure("SERDAR_FAILURE");//
// if(!t_relay()) sl_reply_error();//
// exit;//
//}//
//
//failure_route[SERDAR_FAILURE] {//
// route(NATMANAGE);//
// if (t_is_canceled()) //exit;//
// route(SERDAR);//
//}/
4 Apr
4 Apr
8:46 a.m.
Hello,
in this case, you have to perform the update of To header only in
branch_route.
Cheers,
Daniel
On 03.04.23 14:58, Serdar GUCLUER wrote:
Hello all,
In my situation, it is possible to call forwarding to registered users
multiple times on same leg. For each forward i have to update To uri
and i am using uac_replace_to to do that.
But on second relaying, To uri was malformed. On below, Im attaching
configuration to illustrate my problem. (version-5.4.9)
First relay - /To: //sip:xyz@192.168.0.51/
Second relay - /To: sip:xyz@192.168.0.51sip:abc@192.168.0.51/
Thanks in advance.
Serdar
/loadmodule "uac.so"//
//modparam("uac","restore_mode","auto")//
//
//
//request_route {//
// ...//
// $avp(x) = "abc";//
// $avp(x) = "xyz";//
// $avp(myip) = "192.168.0.51";//
// $avp(i) = 0;//
// route(SERDAR);//
// ...//
//}//
//
//route[SERDAR] {//
// if ($(avp(x)[$avp(i)])!=$null) {//
// $avp(destination) = $(avp(x)[$avp(i)]);//
// $avp(i) = $avp(i) + 1;//
// $rU=$_s($avp(destination));//
// uac_replace_to("$_s(sip:$avp(destination)@$avp(myip))");//
// route(LOCATION);//
// } else {//
// send_reply("403", "Opps!");//
// exit;//
// }//
//}//
//
//route[LOCATION] {//
// $avp(oexten) = $rU;//
// if (!lookup("location") ) {//
// t_newtran();//
// switch ($var(rc)) {//
// case -1://
// case -3://
// send_reply("480", "Temporarily Unavailable");//
// exit;//
// case -2://
// send_reply("405", "Method Not Allowed");//
// exit;//
// }//
// }//
// t_on_failure("SERDAR_FAILURE");//
// if(!t_relay()) sl_reply_error();//
// exit;//
//}//
//
//failure_route[SERDAR_FAILURE] {//
// route(NATMANAGE);//
// if (t_is_canceled()) //exit;//
// route(SERDAR);//
//}/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - June 5-7, 2023 - www.kamailioworld.com
11:16 a.m.
New subject: [External Email] Re: Malformed To Header
Hello Daniel,
Long question, short answer but it worked for me. Thanks for your helping.
Serdar
4.04.2023 08:46 tarihinde Daniel-Constantin Mierla yazdı:
Hello,
in this case, you have to perform the update of To header only in
branch_route.
Cheers,
Daniel
On 03.04.23 14:58, Serdar GUCLUER wrote:
-
Hello all,
In my situation, it is possible to call forwarding to registered
users multiple times on same leg. For each forward i have to update
To uri and i am using uac_replace_to to do that.
But on second relaying, To uri was malformed. On below, Im attaching
configuration to illustrate my problem. (version-5.4.9)
First relay - /To: //sip:xyz@192.168.0.51/
Second relay - /To: sip:xyz@192.168.0.51sip:abc@192.168.0.51/
Thanks in advance.
Serdar
/loadmodule "uac.so"//
//modparam("uac","restore_mode","auto")//
//
//
//request_route {//
// ...//
// $avp(x) = "abc";//
// $avp(x) = "xyz";//
// $avp(myip) = "192.168.0.51";//
// $avp(i) = 0;//
// route(SERDAR);//
// ...//
//}//
//
//route[SERDAR] {//
// if ($(avp(x)[$avp(i)])!=$null) {//
// $avp(destination) = $(avp(x)[$avp(i)]);//
// $avp(i) = $avp(i) + 1;//
// $rU=$_s($avp(destination));//
// uac_replace_to("$_s(sip:$avp(destination)@$avp(myip))");//
// route(LOCATION);//
// } else {//
// send_reply("403", "Opps!");//
// exit;//
// }//
//}//
//
//route[LOCATION] {//
// $avp(oexten) = $rU;//
// if (!lookup("location") ) {//
// t_newtran();//
// switch ($var(rc)) {//
// case -1://
// case -3://
// send_reply("480", "Temporarily Unavailable");//
// exit;//
// case -2://
// send_reply("405", "Method Not Allowed");//
// exit;//
// }//
// }//
// t_on_failure("SERDAR_FAILURE");//
// if(!t_relay()) sl_reply_error();//
// exit;//
//}//
//
//failure_route[SERDAR_FAILURE] {//
// route(NATMANAGE);//
// if (t_is_canceled()) //exit;//
// route(SERDAR);//
//}/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email tosr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
--
Daniel-Constantin Mierla --www.asipto.com
www.twitter.com/miconda --www.linkedin.com/in/miconda
Kamailio World Conference - June 5-7, 2023 -www.kamailioworld.com 
4:03 p.m.
New subject: Modify User-Agent Header in OPTIONS from Dispatcher Module
Hello all
We are using topos in kamailio 5.5.6 to hide topology to some SIP-Servers.
Now, I am trying to modify the User-Agent header of OPTIONS sent by
Dispatcher Module, how is this possible?
I tried something like this, because insert_hf or remove_hf does not
work in event_route:
# Branch cleanup
branch_route[MANAGE_CLEANUP] {
remove_hf("User-Agent");
insert_hf("User-Agent: Test\r\n");
return;
}
# topos route
event_route[topos:msg-sending] {
# Topology hiding for some hosts
if (is_request() and $sndto(ip)=="1.1.1.1") {
if (is_method("OPTIONS")) {
t_on_branch("MANAGE_CLEANUP");
t_relay();
}
} else {
# No topology hiding for other hosts...
drop;
}
}
But the branch-route is never called. I got two errors in Log:
Apr 4 12:17:27 kamailio /usr/sbin/kamailio[32174]: CRITICAL: <core>
[core/ip_addr.c:234]: ip_addr2sbuf(): unknown address family 0
Apr 4 12:17:27 kamailio /usr/sbin/kamailio[32174]: ERROR: tm
[t_fwd.c:1752]: t_forward_nonack(): no branches for forwarding
Any hints how to achieve this?
Regards
Stefan
4:35 p.m.
New subject: Modify User-Agent Header in OPTIONS from Dispatcher Module
Hello,
try this: https://www.kamailio.org/wikidocs/cookbooks/5.6.x/core/#user_agent_header
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
-----Original Message-----
From: Stefan <sr.maillists(a)gmail.com>
Sent: Dienstag, 4. April 2023 15:04
To: sr-users(a)lists.kamailio.org
Subject: [SR-Users] Modify User-Agent Header in OPTIONS from Dispatcher Module
Hello all
We are using topos in kamailio 5.5.6 to hide topology to some SIP-Servers.
Now, I am trying to modify the User-Agent header of OPTIONS sent by Dispatcher Module, how
is this possible?
I tried something like this, because insert_hf or remove_hf does not work in
event_route:
# Branch cleanup
branch_route[MANAGE_CLEANUP] {
remove_hf("User-Agent");
insert_hf("User-Agent: Test\r\n");
return;
}
# topos route
event_route[topos:msg-sending] {
# Topology hiding for some hosts
if (is_request() and $sndto(ip)=="1.1.1.1") {
if (is_method("OPTIONS")) {
t_on_branch("MANAGE_CLEANUP");
t_relay();
}
} else {
# No topology hiding for other hosts...
drop;
}
}
But the branch-route is never called. I got two errors in Log:
Apr 4 12:17:27 kamailio /usr/sbin/kamailio[32174]: CRITICAL: <core>
[core/ip_addr.c:234]: ip_addr2sbuf(): unknown address family 0 Apr 4 12:17:27 kamailio
/usr/sbin/kamailio[32174]: ERROR: tm
[t_fwd.c:1752]: t_forward_nonack(): no branches for forwarding
Any hints how to achieve this?
Regards
Stefan
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to
sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
4:56 p.m.
New subject: Modify User-Agent Header in OPTIONS from Dispatcher Module
Hi Henning
Thank you, this was easy ;-)
But first I wanted to achieve this only for the hosts where I perform
topology hiding.
Anyway, I change the UA Header now globally.
Cheers,
Stefan
Am 04.04.23 um 15:35 schrieb Henning Westerholt:
Hello,
try this: https://www.kamailio.org/wikidocs/cookbooks/5.6.x/core/#user_agent_header
Cheers,
Henning
5 Apr
5 Apr
1:46 p.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hi all
I am playing with topos on kamailio 5.5.6, but when I want to activate
it only for specific hosts, it works only on the initial INVITE request.
Subsequent requests like PRACK, ACK, BYE are not modified.
As soon as I remove the code part below, it works for all requests, but
I need it only on a specific host.
event_route[topos:msg-sending] {
# Topology hiding for one host
if (is_request() and $sndto(ip)=="1.1.1.1") {
xlog("L_INFO","$ci Test event_route
topos:msg-sending\n");
} else {
# No topology hiding
drop;
}
}
Is it meant to function like that or is it a bug?
Regards
Stefan
8:35 p.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hello,
just to sort out the obvious, you are doing record-routing for the initial requests?
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
-----Original Message-----
From: Stefan <sr.maillists(a)gmail.com>
Sent: Mittwoch, 5. April 2023 12:46
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: [SR-Users] TOPOS module: Topology hiding only for a specific host
Hi all
I am playing with topos on kamailio 5.5.6, but when I want to activate it only for
specific hosts, it works only on the initial INVITE request.
Subsequent requests like PRACK, ACK, BYE are not modified.
As soon as I remove the code part below, it works for all requests, but I need it only on
a specific host.
event_route[topos:msg-sending] {
# Topology hiding for one host
if (is_request() and $sndto(ip)=="1.1.1.1") {
xlog("L_INFO","$ci Test event_route
topos:msg-sending\n");
} else {
# No topology hiding
drop;
}
}
Is it meant to function like that or is it a bug?
Regards
Stefan
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to
sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
6 Apr
6 Apr
9:58 a.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hi Henning
Yes, we do record routing.
UAC -> UAS (Kamailio Registrar Server) -> SIP-Proxy (Kamailio
Carrierrouting) -> PSTN
I would like to do topos on the SIP-Proxy direction PSTN but only for
specific hosts.
Regards
Stefan
Am 05.04.23 um 19:35 schrieb Henning Westerholt:
Hello,
just to sort out the obvious, you are doing record-routing for the initial requests?
Cheers,
Henning
10:19 a.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hi Stefan
I would like to do topos on the SIP-Proxy direction
PSTN but only for
specific hosts.
I ran in a quite similar issue with topos which made it unsuitable for
my needs.
Same situation:
CPE <=> Kamailio Registrar (TM Module) <=> Kamailio Routing Core
(Dialogue aware) <=> IC
I would like to hide topo towards the CPE, so they don't have to deal
with route-sets etc. (found some CPE which are and don't correctly set
route header)
But I need the routes towards the kamailio core.
When topos is used, topology is being hidded on both legs, towards CPE
and towards Core. This causes issues with Hairpin Calls (CPE to CPE)
via Core, as the Record-Route contains the registrar twice and topos
removing all Route header containing it's local IP.
If I try to drop topos on calls with destination core, topology hiding
is completely dropped from the transaction.
So any hints on how to do topology hiding on one leg only (towards one
ip only) is highly appreciated.
Mit freundlichen Grüssen
-Benoît Panizzon-
--
I m p r o W a r e A G - Leiter Commerce Kunden
______________________________________________________
Zurlindenstrasse 29 Tel +41 61 826 93 00
CH-4133 Pratteln Fax +41 61 826 93 01
Schweiz Web http://www.imp.ch
______________________________________________________
3:49 p.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hi together
Tested now with 5.3.9 and 5.6.4, same result.
Does anyone use topos only with specific destination hosts?
Cheers
Stefan
Am 06.04.23 um 09:19 schrieb Benoit Panizzon:
Hi Stefan
I would like to do topos on the SIP-Proxy
direction PSTN but only for
specific hosts.
I ran in a quite similar issue with topos which made it unsuitable for
my needs.
Same situation:
CPE <=> Kamailio Registrar (TM Module) <=> Kamailio Routing Core
(Dialogue aware) <=> IC
I would like to hide topo towards the CPE, so they don't have to deal
with route-sets etc. (found some CPE which are and don't correctly set
route header)
But I need the routes towards the kamailio core.
When topos is used, topology is being hidded on both legs, towards CPE
and towards Core. This causes issues with Hairpin Calls (CPE to CPE)
via Core, as the Record-Route contains the registrar twice and topos
removing all Route header containing it's local IP.
If I try to drop topos on calls with destination core, topology hiding
is completely dropped from the transaction.
So any hints on how to do topology hiding on one leg only (towards one
ip only) is highly appreciated.
Mit freundlichen Grüssen
-Benoît Panizzon-
7 Apr
7 Apr
12:48 a.m.
New subject: TOPOS module: Topology hiding only for a specific host
Hi,
I would suggest just putting another PSTN topos Kamailio in between. This
way the problem is solved and you don't make an all in one complex
configuration.
Kind regards
Karsten Horsmann
Stefan <sr.maillists(a)gmail.com> schrieb am Do., 6. Apr. 2023, 15:14:
Hi together
Tested now with 5.3.9 and 5.6.4, same result.
Does anyone use topos only with specific destination hosts?
Cheers
Stefan
...
599
days inactive
602
days old
11 comments
6 participants
participants (6)
-
Benoit Panizzon -
Daniel-Constantin Mierla -
Henning Westerholt -
Karsten Horsmann -
Serdar GUCLUER -
Stefan