Hello,
On Tuesday 20 June 2006 10:11, jp(a)speakplease.com wrote:
I'm quite new with this whole SIP thing (surprise
surprise)
I'm trying to learn and build a system but i can't seem to get even the
most simple redirects to work. I did get it to work earlier, but then it
stopped working and now i can't get it to work again. any help please?
since i'm not that hack with the linux either i reinstalled it in case i
had made stupid mistakes (couldn't get phpmyadmin to work at that point
but that's another story...)
when i do this:
sipsak -vv -s sip:7770088@192.168.1.102
sipsak says:
message received:
** received redirect
error: cannot handle this redirect:
SIP/2.0 300 Redirect
Via: SIP/2.0/UDP
192.168.1.111:1235;branch=z9hG4bK.457b3839;rport=1236;alias From:
sip:sipsak@192.168.1.111:1235;tag=4b93b8d3
To: sip:7770088@192.168.1.102;tag=b27e1a1d33761e85846fc98f5f3a7e58.dd84
Call-ID: 1267972307(a)192.168.1.111
CSeq: 1 OPTIONS
Contact: sip:7770088@sip.varphonex.com:5060
Server: Sip EXpress router (0.9.6 (i386/linux))
Content-Length: 0
Warning: 392 192.168.1.102:5060 "Noisy feedback tells: pid=30758
req_src_ip=192.168.1.111 req_src_port=1236
in_uri=sip:7770088@192.168.1.102
out_uri=sip:7770088@sip.varphonex.com:5060 via_cnt==1"
the redirect i'm using is the redirect example from ser documentation
(changed the rewrite uri to 7770088@sip.varphonex.com:5060)
I'm trying to get my voip phone to connect to varphonex through ser.
The problem is that you are using a 300 response, which means their are
multiple choices for the redirection. As sipsak is not able to followed
multiple choices, in parallel or sequentially, it stops processing the
request. But as your reply contains only one Contact header you should use
301 or 302 instead of 300. Then sipsak should also be able to process it.
Nils
thanks in advance!
-JP
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers