30 Apr
2009
30 Apr
'09
11:38 a.m.
Hi all:
Have running this script on Openser 1.2.3-notls version managing forwards
this way:
route[3] {
...
t_on_failure("1");
if avp_db_load("$ru", "*") {
if (is_avp_set("$avp(s:fwdbusy)/s")) {
setflag(23);
};
...
failure_route[1] {
...
if ((isflagset(23)) && (t_check_status("486"))) {
if (avp_pushto("$ru", "$avp(s:fwdbusy)")) {
t_reply("302","Moved Temporarily");
return;
};
};
...
User A calls user B and B has fwdbusy parameter set in user preferences; if
B is busy, proxy sends 302 message back to A with contact set to
$avp(s:fwdbusy) value. This setup usually works fine. However, sometimes the
proxy shows a strange behaviour. It starts to append an arbitrary contact to
the contact header in every forwarding it does. The contact appended has
nothing to do with A or B or the uri set in the avp. The same uri is
appended in all call forwardings performed in the system. If the proxy is
restarted, the problem disappears.
Example:
SIP/2.0 302 Moved Temporarily
Via: SIP/2.0/UDP 10.100.2.254:5060;branch=z9hG4bK51461DD5
From: <sip:30132@10.100.2.254 <sip%3A30132(a)10.100.2.254>>;tag=92DAB388-EE7
To: <sip:20050@domain.com <sip%3A20050(a)domain.com>
;tag=880a5593aeb097bc75600b31d6e17107-78ac
Call-ID: C0C84A1C-33CE11DE-BEBEEAA9-C0D323DF(a)192.168.2.40
CSeq: 101 INVITE
Contact: sip:30050@domain.com <sip%3A30050(a)domain.com>om>,
<sip:030410@10.172.0.254:5060;transport=udp>;q=0
Server: OpenSER (1.2.3-notls (i386/linux))
Content-Length: 0
<sip:030410@10.172.0.254:5060;transport=udp>;q=0 is added in all forwardings
done the system.
Unfortunately I have no debug info cause it happens in production
environment. I couldn't reproduce the problem in test environment. Have you
got any idea on what could make it happen?
Thanks a lot:
Fran Lizaran
30 Apr
30 Apr
2:38 p.m.
New subject: [Kamailio-Users] Arbitrary contact added in 302 generated responses
On Donnerstag, 30. April 2009, Francisco Javier Lizaran Vilches wrote:
Hi all:
Have running this script on Openser 1.2.3-notls version managing forwards
this way:
[..]
User A calls user B and B has fwdbusy parameter set in user preferences; if
B is busy, proxy sends 302 message back to A with contact set to
$avp(s:fwdbusy) value. This setup usually works fine. However, sometimes
the proxy shows a strange behaviour. It starts to append an arbitrary
contact to the contact header in every forwarding it does. The contact
appended has nothing to do with A or B or the uri set in the avp. The same
uri is appended in all call forwardings performed in the system. If the
proxy is restarted, the problem disappears.
Example:
Contact: sip:30050@domain.com <sip%3A30050(a)domain.com>om>,
<sip:030410@10.172.0.254:5060;transport=udp>;q=0
Hi Francisco,
strange.. How frequent do you observe this? Did i understand you correctly, if
this change in behaviour occur, it alter the Contact header in every
forwarding? Do you get also some other problems, like a eventual crash, or
errors in other areas? Do you use any custom (self written) module in your
setup?
Cheers,
Henning
4 May
4 May
10:34 a.m.
New subject: [Kamailio-Users] Arbitrary contact added in 302 generated responses
Hi Henning:
It happens after one or two weeks of operation. Yes, it changes the
contact header in every forwarding appending the same uri. If a restart is
performed, after a few days it happens again but a different uri is appended
this time, and so on. I have not noticed any other problem apart from that.
The only change made to this version was a backport of mysql module from 1.3
to avoid mysql connection problems (see that thread
http://openser.org/pipermail/users/2008-February/016101.html ).
Regards:
Francisco
2009/4/30 Henning Westerholt <henning.westerholt(a)1und1.de>
On Donnerstag, 30. April 2009, Francisco Javier
Lizaran Vilches wrote:
--
Fran Lizaran
Comprometido con el Derecho a Vivir
http://derechoavivir.org
Hi all:
Have running this script on Openser 1.2.3-notls version managing forwards
this way:
[..]
User A calls user B and B has fwdbusy parameter set in user preferences;
if
B is busy, proxy sends 302 message back to A with
contact set to
$avp(s:fwdbusy) value. This setup usually works fine. However, sometimes
the proxy shows a strange behaviour. It starts to append an arbitrary
contact to the contact header in every forwarding it does. The contact
appended has nothing to do with A or B or the uri set in the avp. The
same
uri is appended in all call forwardings performed
in the system. If the
proxy is restarted, the problem disappears.
Example:
Contact: sip:30050@domain.com <sip%3A30050(a)domain.com> <
sip%3A30050(a)domain.com <sip%253A30050(a)domain.com>>m>>,
<sip:030410@10.172.0.254:5060;transport=udp>;q=0
Hi Francisco,
strange.. How frequent do you observe this? Did i understand you correctly,
if this change in behaviour occur, it alter the Contact header in every
forwarding? Do you get also some other problems, like a eventual crash, or
errors in other areas? Do you use any custom (self written) module in your
setup?
Cheers,
Henning
4:31 p.m.
New subject: [Kamailio-Users] Arbitrary contact added in 302 generated responses
On Montag, 4. Mai 2009, Francisco Javier Lizaran Vilches wrote:
It happens after one or two weeks of operation. Yes,
it changes the
contact header in every forwarding appending the same uri.
Hi Francisco,
ok, understand.
If a restart is
performed, after a few days it happens again but a different uri is
appended this time, and so on. I have not noticed any other problem apart
from that.
This looks like a random memory corruption to me at the moment, perhaps one
that is not in a really critical area, otherwise the server would definitely
crash.
The only change made to this version was a backport of
mysql
module from 1.3 to avoid mysql connection problems (see that thread
http://openser.org/pipermail/users/2008-February/016101.html ).
This is only a minor change, could not imagine how this could caused this
problem. I also backported this to our 1.3 version that we use in production.
If the server did is not is under a really heavy load, you could try to enable
memory debugging. (edit Makefile.defs file and remove from the DEFS string the
F_MALLOC define (delete ”-DF_MALLOC” line) and add the DBG_QM_MALLOC define
(insert a ”-DDBG_QM_MALLOC” line.) Then the server will do more run-time
checks in the memory manager and perhaps catch the bug when its happened.
Cheers,
Henning
5711
days inactive
5715
days old
3 comments
2 participants
participants (2)
-
Francisco Javier Lizaran Vilches -
Henning Westerholt