14 Nov
2003
14 Nov
'03
4:58 p.m.
Hi,
I'm trying to run the vm module to connect to SEMS. However, I'm getting
an error in the dbtext module saying: Not enough memory. However, there
should be plenty of memory available. Below I enclose my configuration,
the error message and the ser.cfg file.
Is there anything obvious wrong in my setup?
Many thanks!
Mario
versions and compile flags are:
ser -V
version: ser 0.8.11pre36 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.162.2.3 2003/06/28 17:10:36 andrei Exp $
main.c compiled on 13:51:19 Nov 14 2003 with gcc 3.2
The error message I get looks like:
ser
0(10682) loading module
/usr/local/lib/ser/modules/mysql.so
0(10682) loading module /usr/local/lib/ser/modules/sl.so
0(10682) loading module /usr/local/lib/ser/modules/tm.so
0(10682) loading module /usr/local/lib/ser/modules/rr.so
0(10682) loading module /usr/local/lib/ser/modules/maxfwd.so
0(10682) loading module /usr/local/lib/ser/modules/usrloc.so
0(10682) loading module /usr/local/lib/ser/modules/registrar.so
0(10682) loading module /usr/local/lib/ser/modules/auth.so
0(10682) loading module /usr/local/lib/ser/modules/auth_db.so
0(10682) loading module /usr/local/lib/ser/modules/textops.so
0(10682) loading module /usr/local/lib/ser/modules/vm.so
0(10682) loading module /usr/local/lib/ser/modules/dbtext.so
0(10682) set_mod_param_regex: voicemail matches module voicemail
0(10682) set_mod_param_regex: found <db_url> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) set_mod_param_regex: usrloc matches module usrloc
0(10682) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/local/lib/ser/modules/usrloc.so]
0(10682) set_mod_param_regex: auth_db matches module auth_db
0(10682) set_mod_param_regex: found <calculate_ha1> in module auth_db
[/usr/local/lib/ser/modules/auth_db.so]
0(10682) set_mod_param_regex: auth_db matches module auth_db
0(10682) set_mod_param_regex: found <password_column> in module
auth_db [/usr/local/lib/ser/modules/auth_db.so]
0(10682) find_export: found <mf_process_maxfwd_header> in module
maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <record_route> in module rr
[/usr/local/lib/ser/modules/rr.so]
0(10682) find_export: found <loose_route> in module rr
[/usr/local/lib/ser/modules/rr.so]
0(10682) find_export: found <www_authorize> in module auth_db
[/usr/local/lib/ser/modules/auth_db.so]
0(10682) find_export: found <www_challenge> in module auth
[/usr/local/lib/ser/modules/auth.so]
0(10682) find_export: found <save> in module registrar
[/usr/local/lib/ser/modules/registrar.so]
0(10682) find_export: found <t_newtran> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <lookup> in module registrar
[/usr/local/lib/ser/modules/registrar.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <t_relay> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <sl_reply_error> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) routing table 0:
.... routing table removed ...
Listening on
127.0.0.1 [127.0.0.1]:5060
139.153.254.203 [139.153.254.203]:5060
Aliases: localhost:5060 localhost.localdomain:5060 d254203:5060
cs.stir.ac.uk:* d254203.cs.stir.ac.uk:*
WARNING: no fork mode and more than one listen address found (will use
only the the first one)
0(10682) DEBUG: init_mod: mysql
0(10682) mysql - initializing
0(10682) DEBUG: init_mod: sl_module
stateless - initializing
0(10682) DEBUG: register_fifo_cmd: new command (sl_stats) registered
0(10682) DEBUG: MD5 calculated: b27e1a1d33761e85846fc98f5f3a7e58
0(10682) DEBUG: init_mod: tm
0(10682) TM - initializing...
0(10682) Call-ID initialization: '58f7fc7f'
0(10682) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
0(10682) DEBUG: register_fifo_cmd: new command (t_hash) registered
0(10682) DEBUG: lock_initialize: lock initialization started
0(10682) DEBUG: register_fifo_cmd: new command (t_stats) registered
0(10682) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed
0(10682) DEBUG: MD5 calculated: a6a1c5f60faecf035a1ae5b6e96e979a
0(10682) DEBUG: init_mod: rr
0(10682) rr - initializing
0(10682) DEBUG: init_mod: maxfwd_module
Maxfwd module- initializing
0(10682) DEBUG: init_mod: usrloc
0(10682) usrloc - initializing
0(10682) DEBUG: register_fifo_cmd: new command (ul_stats) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_rm) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_dump) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_flush) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_add) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_show_contact)
registered
0(10682) find_export: found <~db_use_table> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_init> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_close> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_raw_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_free_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_insert> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_delete> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_update> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) DBT:dbt_cache_get_db: dbtext cache not initialized!
0(10682) DBT:dbt_init: No enough memory
0(10682) mod_init(): Error while connecting database
0(10682) init_mod(): Error while initializing module usrloc
ERROR: error while initializing modules
0(10682) DBT:destroy ...
0(10682) DEBUG: tm_shutdown : start
0(10682) DEBUG: tm_shutdown : empting DELETE list
0(10682) DEBUG: tm_shutdown : empting hash table
0(10682) DEBUG: tm_shutdown: releasing timers
0(10682) DEBUG: tm_shutdown : removing semaphores
0(10682) DEBUG: tm_shutdown : done
0(10682) shm_mem_destroy
0(10682) destroying the shared memory lock
My ser.cfg file looks like and contains large shunks of the example file
which comes with the vm module:
#
# $Id: ser.cfg,v 1.18 2003/05/06 16:19:15 janakj Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3
fork=yes
log_stderror=yes
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
alias="d254203.cs.stir.ac.uk"
alias="cs.stir.ac.uk"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/vm.so"
loadmodule "/usr/local/lib/ser/modules/dbtext.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("voicemail",
"db_url","/root/new_sip_router/modules/vm/db")
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
loose_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
if (!www_authorize("cs.stir.ac.uk", "subscriber")) {
www_challenge("cs.stir.ac.uk", "0");
break;
};
save("location");
break;
};
# Voicemail specific configuration - begin
if(method=="ACK" || method=="INVITE" ||
method=="BYE"
|| method=="REFER"){
if(t_newtran()){
t_reply("100","Trying -- just wait a minute
!");
if(method=="INVITE" || method=="REFER"){
log("** vm start - begin *******\n");
if( uri =~ "conference" ){
if(!vm("/tmp/am_fifo","conference")){
log("could not contact conference server\n");
t_reply("500","could not contact conference
server");
};
} else if( uri =~ "echo" ){
if(!vm("/tmp/am_fifo","echo")){
log("could not contact echo\n");
t_reply("500","could not contact echo");
};
}
else {
if(!vm("/tmp/am_fifo","voicemail")){
log("could not contact voicemail\n");
t_reply("500","could not contact
voicemail");
};
};
log("**** vm start - end *********\n");
break;
};
if(method=="BYE"){
log("***** vm end/refer - begin *******\n");
if(!vm("/tmp/am_fifo","bye")){
log("could not contact the media server\n");
t_reply("500","could not contact the media
server");
};
log("***** vm end/refer - end ********\n");
break;
};
}
else {
log("could not create new transaction\n");
sl_send_reply("500","could not create new
transaction");
};
};
# Voicemail specific configuration - end
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
--
The University of Stirling is a university established in Scotland by
charter at Stirling, FK9 4LA. Privileged/Confidential Information may
be contained in this message. If you are not the addressee indicated
in this message (or responsible for delivery of the message to such
person), you may not disclose, copy or deliver this message to anyone
and any action taken or omitted to be taken in reliance on it, is
prohibited and may be unlawful. In such case, you should destroy this
message and kindly notify the sender by reply email. Please advise
immediately if you or your employer do not consent to Internet email
for messages of this kind.
15 Nov
15 Nov
6:16 p.m.
At 03:58 PM 11/14/2003, Mario Kolberg wrote:
Hi,
I'm trying to run the vm module to connect to SEMS. However, I'm getting an error
in the dbtext module saying: Not enough memory. However, there should be plenty of memory
available. Below I enclose my configuration, the error message and the ser.cfg file.
Is there anything obvious wrong in my setup?
Many thanks!
Mario
[...]
0(10682) DBT:dbt_cache_get_db: dbtext cache not
initialized!
0(10682) DBT:dbt_init: No enough memory
0(10682) mod_init(): Error while connecting database
0(10682) init_mod(): Error while initializing module usrloc
ERROR: error while initializing modules
I suppose it is not actually a memory issue -- if I remember right,
the "no enough memory" is misleading in that it prints on non-memory
failures too. Unfortunately, I'm not sure what the real error cause
could be.
-jiri
17 Nov
17 Nov
6:41 p.m.
Hello,
as Jiri pointed out, it is not a memory issue. There was a misleading
debug message. You are using a pretty old version of ser, the prerelease
0.8.11pre36 (i386/linux). Since then we fully released the version
0.8.11. I don't know exactly what was the status of the dbtext at that
moment, but is better to shift to v0.8.11. Also, in the last days there
were some fixes for dbtext that are now on cvs -- into HEAD branch as
well as the testing_0_8_12 that is going to be the next release. If you
download the module from branch testing_0_8_12 and compile it inside the
v0.8.11 sources it should work without problems, since there were only
fixes. The HEAD includes some changes that allow many database systems
in the same time, but this branch is not tested so it may be unstable.
From here, another problem I can see into config file -- you use dbtext
and mysql in the same time. That will produce a mess with v0.8.11. In
the future, as I said above, (not in v0.8.12) it will be possible to
use more than one database system in the same time.
So, please try again with at least the version 0.8.11 and tell us if you
have the same problem. I would say to take the dbtext module from
testing_0_8_12 branch -- it is more stable.
Best regards,
}Daniel
On 11/14/2003 3:58 PM, Mario Kolberg wrote:
Hi,
I'm trying to run the vm module to connect to SEMS. However, I'm
getting an error in the dbtext module saying: Not enough memory.
However, there should be plenty of memory available. Below I enclose
my configuration, the error message and the ser.cfg file.
Is there anything obvious wrong in my setup?
Many thanks!
Mario
versions and compile flags are:
ser -V
version: ser 0.8.11pre36
(i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.162.2.3 2003/06/28 17:10:36 andrei Exp $
main.c compiled on 13:51:19 Nov 14 2003 with gcc 3.2
The error message I get looks like:
ser
0(10682) loading module
/usr/local/lib/ser/modules/mysql.so
0(10682) loading module /usr/local/lib/ser/modules/sl.so
0(10682) loading module /usr/local/lib/ser/modules/tm.so
0(10682) loading module /usr/local/lib/ser/modules/rr.so
0(10682) loading module /usr/local/lib/ser/modules/maxfwd.so
0(10682) loading module /usr/local/lib/ser/modules/usrloc.so
0(10682) loading module /usr/local/lib/ser/modules/registrar.so
0(10682) loading module /usr/local/lib/ser/modules/auth.so
0(10682) loading module /usr/local/lib/ser/modules/auth_db.so
0(10682) loading module /usr/local/lib/ser/modules/textops.so
0(10682) loading module /usr/local/lib/ser/modules/vm.so
0(10682) loading module /usr/local/lib/ser/modules/dbtext.so
0(10682) set_mod_param_regex: voicemail matches module voicemail
0(10682) set_mod_param_regex: found <db_url> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) set_mod_param_regex: usrloc matches module usrloc
0(10682) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/local/lib/ser/modules/usrloc.so]
0(10682) set_mod_param_regex: auth_db matches module auth_db
0(10682) set_mod_param_regex: found <calculate_ha1> in module auth_db
[/usr/local/lib/ser/modules/auth_db.so]
0(10682) set_mod_param_regex: auth_db matches module auth_db
0(10682) set_mod_param_regex: found <password_column> in module
auth_db [/usr/local/lib/ser/modules/auth_db.so]
0(10682) find_export: found <mf_process_maxfwd_header> in module
maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <record_route> in module rr
[/usr/local/lib/ser/modules/rr.so]
0(10682) find_export: found <loose_route> in module rr
[/usr/local/lib/ser/modules/rr.so]
0(10682) find_export: found <www_authorize> in module auth_db
[/usr/local/lib/ser/modules/auth_db.so]
0(10682) find_export: found <www_challenge> in module auth
[/usr/local/lib/ser/modules/auth.so]
0(10682) find_export: found <save> in module registrar
[/usr/local/lib/ser/modules/registrar.so]
0(10682) find_export: found <t_newtran> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <vm> in module voicemail
[/usr/local/lib/ser/modules/vm.so]
0(10682) find_export: found <t_reply> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <lookup> in module registrar
[/usr/local/lib/ser/modules/registrar.so]
0(10682) find_export: found <sl_send_reply> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) find_export: found <t_relay> in module tm
[/usr/local/lib/ser/modules/tm.so]
0(10682) find_export: found <sl_reply_error> in module sl_module
[/usr/local/lib/ser/modules/sl.so]
0(10682) routing table 0:
.... routing table removed ...
Listening on
127.0.0.1 [127.0.0.1]:5060
139.153.254.203 [139.153.254.203]:5060
Aliases: localhost:5060 localhost.localdomain:5060 d254203:5060
cs.stir.ac.uk:* d254203.cs.stir.ac.uk:*
WARNING: no fork mode and more than one listen address found (will
use only the the first one)
0(10682) DEBUG: init_mod: mysql
0(10682) mysql - initializing
0(10682) DEBUG: init_mod: sl_module
stateless - initializing
0(10682) DEBUG: register_fifo_cmd: new command (sl_stats) registered
0(10682) DEBUG: MD5 calculated: b27e1a1d33761e85846fc98f5f3a7e58
0(10682) DEBUG: init_mod: tm
0(10682) TM - initializing...
0(10682) Call-ID initialization: '58f7fc7f'
0(10682) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
0(10682) DEBUG: register_fifo_cmd: new command (t_hash) registered
0(10682) DEBUG: lock_initialize: lock initialization started
0(10682) DEBUG: register_fifo_cmd: new command (t_stats) registered
0(10682) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed
0(10682) DEBUG: MD5 calculated: a6a1c5f60faecf035a1ae5b6e96e979a
0(10682) DEBUG: init_mod: rr
0(10682) rr - initializing
0(10682) DEBUG: init_mod: maxfwd_module
Maxfwd module- initializing
0(10682) DEBUG: init_mod: usrloc
0(10682) usrloc - initializing
0(10682) DEBUG: register_fifo_cmd: new command (ul_stats) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_rm) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_rm_contact)
registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_dump) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_flush) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_add) registered
0(10682) DEBUG: register_fifo_cmd: new command (ul_show_contact)
registered
0(10682) find_export: found <~db_use_table> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_init> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_close> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_raw_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_free_query> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_insert> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_delete> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) find_export: found <~db_update> in module dbtext
[/usr/local/lib/ser/modules/dbtext.so]
0(10682) DBT:dbt_cache_get_db: dbtext cache not initialized!
0(10682) DBT:dbt_init: No enough memory
0(10682) mod_init(): Error while connecting database
0(10682) init_mod(): Error while initializing module usrloc
ERROR: error while initializing modules
0(10682) DBT:destroy ...
0(10682) DEBUG: tm_shutdown : start
0(10682) DEBUG: tm_shutdown : empting DELETE list
0(10682) DEBUG: tm_shutdown : empting hash table
0(10682) DEBUG: tm_shutdown: releasing timers
0(10682) DEBUG: tm_shutdown : removing semaphores
0(10682) DEBUG: tm_shutdown : done
0(10682) shm_mem_destroy
0(10682) destroying the shared memory lock
My ser.cfg file looks like and contains large shunks of the example
file which comes with the vm module:
#
# $Id: ser.cfg,v 1.18 2003/05/06 16:19:15 janakj Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3
fork=yes
log_stderror=yes
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
alias="d254203.cs.stir.ac.uk"
alias="cs.stir.ac.uk"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/vm.so"
loadmodule "/usr/local/lib/ser/modules/dbtext.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("voicemail",
"db_url","/root/new_sip_router/modules/vm/db")
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
loose_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
if (!www_authorize("cs.stir.ac.uk", "subscriber")) {
www_challenge("cs.stir.ac.uk", "0");
break;
};
save("location");
break;
};
# Voicemail specific configuration - begin
if(method=="ACK" || method=="INVITE" ||
method=="BYE"
|| method=="REFER"){
if(t_newtran()){
t_reply("100","Trying -- just wait a minute
!");
if(method=="INVITE" || method=="REFER"){
log("** vm start - begin *******\n");
if( uri =~ "conference" ){
if(!vm("/tmp/am_fifo","conference")){
log("could not contact conference server\n");
t_reply("500","could not contact conference
server");
};
} else if( uri =~ "echo" ){
if(!vm("/tmp/am_fifo","echo")){
log("could not contact echo\n");
t_reply("500","could not contact echo");
};
}
else {
if(!vm("/tmp/am_fifo","voicemail")){
log("could not contact voicemail\n");
t_reply("500","could not contact
voicemail");
};
};
log("**** vm start - end *********\n");
break;
};
if(method=="BYE"){
log("***** vm end/refer - begin *******\n");
if(!vm("/tmp/am_fifo","bye")){
log("could not contact the media server\n");
t_reply("500","could not contact the media
server");
};
log("***** vm end/refer - end ********\n");
break;
};
}
else {
log("could not create new transaction\n");
sl_send_reply("500","could not create new
transaction");
};
};
# Voicemail specific configuration - end
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
7707
days inactive
7710
days old
2 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Jiri Kuthan -
Mario Kolberg