Hi,
I am having two lcr gateways in lcr_gw table.
But When executing the "kamcmd lcr.dump_gws", Its showing only one gateway list:
[root@zeodialer ~]# kamcmd lcr.dump_gws { lcr_id: 1 gw_id: 1 gw_index: 1 gw_name: Carrier1 scheme: sip: ip_addr: 104.251.178.29 hostname: port: 5060 params: transport: ;transport=udp strip: 0 prefix: tag: flags: 1 state: 0 defunct_until: 0 }
Did I missing something?
Thanks & Kind Regards, Logeshwaran G
Also I am not sure about the below output as well:
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52*
*Why these two numbers are 5 and 2 are displaying in the output? Did I need to change something?*
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 3:30 PM, Logeshwaran G logeshwarangs@gmail.com wrote:
Hi,
I am having two lcr gateways in lcr_gw table.
But When executing the "kamcmd lcr.dump_gws", Its showing only one gateway list:
[root@zeodialer ~]# kamcmd lcr.dump_gws { lcr_id: 1 gw_id: 1 gw_index: 1 gw_name: Carrier1 scheme: sip: ip_addr: 104.251.178.29 hostname: port: 5060 params: transport: ;transport=udp strip: 0 prefix: tag: flags: 1 state: 0 defunct_until: 0 }
Did I missing something?
Thanks & Kind Regards, Logeshwaran G
This is my lcr_gw table:
MariaDB [kamailio]> select * from lcr_gw; +----+--------+----------+----------------+----------+------+--------+------------+-----------+-------+--------+------+-------+---------+--------+-----------+-------------+------------+--------------+ | id | lcr_id | gw_name | ip_addr | hostname | port | params | uri_scheme | transport | strip | prefix | tag | flags | defunct | status | createdBy | createdDate | modifiedBy | modifiedDate | +----+--------+----------+----------------+----------+------+--------+------------+-----------+-------+--------+------+-------+---------+--------+-----------+-------------+------------+--------------+ | 1 | 1 | Carrier1 | 1.2.3.4 | NULL | 5060 | NULL | 1 | 1 | 0 | NULL | NULL | 1 | NULL | 1 | NULL | NULL | NULL | NULL | | 3 | 2 | Carrier2 | 4.3.2.1 | NULL | 5060 | NULL | 1 | 1 | 0 | NULL | NULL | 1 | NULL | 0 | NULL | NULL | NULL | NULL | +----+--------+----------+----------------+----------+------+--------+------------+-----------+-------+--------+------+-------+---------+--------+-----------+-------------+------------+--------------+
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 3:37 PM, Logeshwaran G logeshwarangs@gmail.com wrote:
Also I am not sure about the below output as well:
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52*
*Why these two numbers are 5 and 2 are displaying in the output? Did I need to change something?*
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 3:30 PM, Logeshwaran G logeshwarangs@gmail.com wrote:
Hi,
I am having two lcr gateways in lcr_gw table.
But When executing the "kamcmd lcr.dump_gws", Its showing only one gateway list:
[root@zeodialer ~]# kamcmd lcr.dump_gws { lcr_id: 1 gw_id: 1 gw_index: 1 gw_name: Carrier1 scheme: sip: ip_addr: 104.251.178.29 hostname: port: 5060 params: transport: ;transport=udp strip: 0 prefix: tag: flags: 1 state: 0 defunct_until: 0 }
Did I missing something?
Thanks & Kind Regards, Logeshwaran G
Thank you
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 9:48 PM, Juha Heinanen jh@tutpro.com wrote:
Logeshwaran G writes:
*52*
*Why these two numbers are 5 and 2 are displaying in the output? Did I
need
to change something?*
They are lengths of prefixes in the rules. Probably included for some debugging needs.
-- Juha
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Yes I gave the kamcmd lcr.reload command everytime .
Issue is resolved once I have added the below modparam in cfg.
modparam("lcr", "lcr_count", 10).
But the issue is not fixed for the below one:
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52**Why these two numbers are 5 and 2 are displaying in the output? Did I need to change something?*
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 4:17 PM, Juha Heinanen jh@tutpro.com wrote:
Logeshwaran G writes:
I am having two lcr gateways in lcr_gw table.
Check if you called lcr.reload after adding the other gw to lcr_gw table.
-- Juha
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Logeshwaran G writes:
But the issue is not fixed for the below one:
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52**Why these two numbers are 5 and 2 are displaying in the output?
What do you mean by 5 and 2? I don't see those in the above.
-- Juha
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52**Why these two numbers are 5 and 2 are displaying in the output? Did I need to change something?*
Thanks & Kind Regards, Logeshwaran G
On Fri, Aug 25, 2017 at 4:54 PM, Juha Heinanen jh@tutpro.com wrote:
Logeshwaran G writes:
But the issue is not fixed for the below one:
[root@zeodialer ~]# kamcmd lcr.dump_rules { lcr_id: 1 rule_id: 1 prefix: 91 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 } { lcr_id: 1 rule_id: 4 prefix: 00091 from_uri: request_uri: stopper: 1 } { gw_index: 1 priority: 1 weight: 1 }
*52**Why these two numbers are 5 and 2 are displaying in the output?
What do you mean by 5 and 2? I don't see those in the above.
-- Juha
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users