group_radius module sends another query to the radius server. Check the logs of the radius server to see what's wrong.

Jan.

On 24-11 09:37, Axel Böger wrote:

Hi all,

I try to use radius for user authorization and group checking. But it seems that the group_radius module find no credentials for the user, even if it is authorized by module auth_radius. Actually I use ser 0.8.11 without a mysql-db. The actual config is below.

Thanks, Axel

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=yes log_stderror=no */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so"

loadmodule "/usr/lib/ser/modules/textops.so" #loadmodule "/usr/lib/ser/modules/acc.so"

loadmodule "/usr/lib/ser/modules/auth_radius.so" loadmodule "/usr/lib/ser/modules/group_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 0)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1)

# -- acc params -- # set the reporting log level #modparam("acc", "log_level", 1) # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion status will be reported #modparam("acc", "log_flag", 1 )

modparam("auth_radius", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("group_radius", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15)

modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (len_gt( max_len )) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();

    # loose-route processing
    if (loose_route()) {
            t_relay();
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

                    if (!radius_www_authorize("")) {
                            www_challenge("", "1");
                            break;
                    };

                    save("location");
                    break;
            };

            if (uri=~"^sip:0[0-9]*@fn-sip.mcbone.net") {

                    log("Check group\n");
                    if (!radius_is_user_in("credentials", "pstn")) {
                            sl_send_reply("403", "no PSTN authorization");
                            break;
                    };

                    log("Forwarding to PSTN\n");      ##  registered in our realm
                    rewritehostport("62.104.210.134:5060");
                    t_relay_to_udp ("62.104.210.134", "5060");
                    break;
            };



            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    # forward to current uri now; use stateful forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
            sl_reply_error();
    };

# forward the request to all destinations in destination set now t_relay();

}

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers