13 Dec
2005
13 Dec
'05
12:12 p.m.
I compile mysql.so with the following command.
make modules=modules/mysql modules
I have followed the document to configure openuser to use SQL. When I
start openser, the error message below is shown. What does it mean the
module compile flags? Any clue?
openser: ERROR: module compile flags mismatch for
/usr/local/lib/openser/modules/mysql.so core: STATS: Off, EXTRA_DEBUG,
USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM,
SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT module: STATS:
Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM,
SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
<mailto:users@openser.org>
13 Dec
13 Dec
1:26 p.m.
Hi,
you used different flags for compiling mysql module and core - recompile
everything with same flag/configuration
regards,
bogdan
maillisting wrote:
I compile mysql.so with the following command.
make modules=modules/mysql modules
I have followed the document to configure openuser to use SQL. When I
start openser, the error message below is shown. What does it mean
the module compile flags? Any clue?
openser: ERROR: module compile flags mismatch for
/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
<mailto:users@openser.org>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
14 Dec
14 Dec
3:56 a.m.
Hi,
What do you mean by different flag?
I compile openser core with the following syntax
make mode=debug all
make prefix=/usr/local install
By default, mysql won't compile.
So I compile mysql with the following.
make modules=modules/mysql modules
On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
Hi,
you used different flags for compiling mysql module and core - recompile
everything with same flag/configuration
regards,
bogdan
maillisting wrote:
I compile mysql.so with the following command.
make modules=modules/mysql modules
I have followed the document to configure openuser to use SQL. When I
start openser, the error message below is shown. What does it mean
the module compile flags? Any clue?
openser: ERROR: module compile flags mismatch for
/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
<mailto:users@openser.org>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
4:09 a.m.
Hello,
Maybe you have modules from different compiles mixed. One way to make
sure everything is at the same level is to remove all the modules from
/usr/local/lib/openser/modules, then recompile everything.
We use FreeBSD here and to compile/install we generally only need to
perform the following two steps:
1) gmake
2) gmake install
We have found that more than enough debugging information is available
by the generous use of xlog in our configuration files with "debug=3".
If you really want alot of debugging information, "debug=9" can be used
in your configuration file.
Hope this helps.
Regards,
Norm
unplug wrote:
Hi,
What do you mean by different flag?
I compile openser core with the following syntax
make mode=debug all
make prefix=/usr/local install
By default, mysql won't compile.
So I compile mysql with the following.
make modules=modules/mysql modules
On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
Hi,
you used different flags for compiling mysql module and core - recompile
everything with same flag/configuration
regards,
bogdan
maillisting wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
I compile mysql.so with the following command.
make modules=modules/mysql modules
I have followed the document to configure openuser to use SQL. When I
start openser, the error message below is shown. What does it mean
the module compile flags? Any clue?
openser: ERROR: module compile flags mismatch for
/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
<mailto:users@openser.org>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
5:32 a.m.
Hi,
Thanks! But the mysql.so doesn't compile in default. I can run
without mysql module. But failed to start openser after including
mysql.so.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
Hello,
Maybe you have modules from different compiles mixed. One way to make
sure everything is at the same level is to remove all the modules from
/usr/local/lib/openser/modules, then recompile everything.
We use FreeBSD here and to compile/install we generally only need to
perform the following two steps:
1) gmake
2) gmake install
We have found that more than enough debugging information is available
by the generous use of xlog in our configuration files with "debug=3".
If you really want alot of debugging information, "debug=9" can be used
in your configuration file.
Hope this helps.
Regards,
Norm
unplug wrote:
Hi,
What do you mean by different flag?
I compile openser core with the following syntax
make mode=debug all
make prefix=/usr/local install
By default, mysql won't compile.
So I compile mysql with the following.
make modules=modules/mysql modules
On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
Hi,
you used different flags for compiling mysql module and core - recompile
everything with same flag/configuration
regards,
bogdan
maillisting wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
I compile mysql.so with the following command.
make modules=modules/mysql modules
I have followed the document to configure openuser to use SQL. When I
start openser, the error message below is shown. What does it mean
the module compile flags? Any clue?
openser: ERROR: module compile flags mismatch for
/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
<mailto:users@openser.org>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6:01 a.m.
When you said "doesn't compile in default", do you mean generates a
compile error or dosen't compile ? If it doesn't compile, take a look
at "exclude_modules" in "Makefile". If mysql is there, remove it and
try again. There was a time when mysql was not included by default. If
there are compile errors associated with mysql, please post them.
Regards,
Norm
unplug wrote:
Hi,
Thanks! But the mysql.so doesn't compile in default. I can run
without mysql module. But failed to start openser after including
mysql.so.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
Hello,
Maybe you have modules from different compiles mixed. One way to make
sure everything is at the same level is to remove all the modules from
/usr/local/lib/openser/modules, then recompile everything.
We use FreeBSD here and to compile/install we generally only need to
perform the following two steps:
1) gmake
2) gmake install
We have found that more than enough debugging information is available
by the generous use of xlog in our configuration files with "debug=3".
If you really want alot of debugging information, "debug=9" can be used
in your configuration file.
Hope this helps.
Regards,
Norm
unplug wrote:
Hi,
What do you mean by different flag?
I compile openser core with the following syntax
make mode=debug all
make prefix=/usr/local install
By default, mysql won't compile.
So I compile mysql with the following.
make modules=modules/mysql modules
On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
Hi,
you used different flags for compiling mysql module and core - recompile
everything with same flag/configuration
regards,
bogdan
maillisting wrote:
>I compile mysql.so with the following command.
>make modules=modules/mysql modules
>I have followed the document to configure openuser to use SQL. When I
>start openser, the error message below is shown. What does it mean
>the module compile flags? Any clue?
>
>openser: ERROR: module compile flags mismatch for
>/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
>EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
>SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
>FAST_LOCK-ADAPTIVE_WAIT
>
><mailto:users@openser.org>
>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
>
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
9:35 a.m.
There is no error in the compilation. What I mean is I need to
compile mysql.so separately. Just find out that if I compile openser
code with parameter mode=debug, this openser won't work using
mysql.so. It will work if I compile openser code without debug mode.
It is what I have found.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
When you said "doesn't compile in
default", do you mean generates a
compile error or dosen't compile ? If it doesn't compile, take a look
at "exclude_modules" in "Makefile". If mysql is there, remove it
and
try again. There was a time when mysql was not included by default. If
there are compile errors associated with mysql, please post them.
Regards,
Norm
unplug wrote:
Hi,
Thanks! But the mysql.so doesn't compile in default. I can run
without mysql module. But failed to start openser after including
mysql.so.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
Hello,
Maybe you have modules from different compiles mixed. One way to make
sure everything is at the same level is to remove all the modules from
/usr/local/lib/openser/modules, then recompile everything.
We use FreeBSD here and to compile/install we generally only need to
perform the following two steps:
1) gmake
2) gmake install
We have found that more than enough debugging information is available
by the generous use of xlog in our configuration files with "debug=3".
If you really want alot of debugging information, "debug=9" can be used
in your configuration file.
Hope this helps.
Regards,
Norm
unplug wrote:
Hi,
What do you mean by different flag?
I compile openser core with the following syntax
make mode=debug all
make prefix=/usr/local install
By default, mysql won't compile.
So I compile mysql with the following.
make modules=modules/mysql modules
On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
>Hi,
>
>you used different flags for compiling mysql module and core - recompile
>everything with same flag/configuration
>
>regards,
>bogdan
>
>maillisting wrote:
>
>
>
>
>
>>I compile mysql.so with the following command.
>>make modules=modules/mysql modules
>>I have followed the document to configure openuser to use SQL. When I
>>start openser, the error message below is shown. What does it mean
>>the module compile flags? Any clue?
>>
>>openser: ERROR: module compile flags mismatch for
>>/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
>>EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
>>SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>>module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>>DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
>>FAST_LOCK-ADAPTIVE_WAIT
>>
>><mailto:users@openser.org>
>>
>>_______________________________________________
>>Users mailing list
>>Users(a)openser.org
>>http://openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>>
>>
>
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
3:46 p.m.
Hi,
even I had the same problem related to mysql.so, but it was solved thanks to
the replies to the mail regarding "mysqulso error".
but now even after that problem is solved, still the SIP UA is not albe to
register with OpenSER, it is giving me the error...
500 I'm terribly sorry, server error occurred
Iam using the OpenSER with TLS support
Thanks,
Neil
On 12/14/05, unplug <maillisting(a)gmail.com> wrote:
There is no error in the compilation. What I mean is I need to
compile mysql.so separately. Just find out that if I compile openser
code with parameter mode=debug, this openser won't work using
mysql.so. It will work if I compile openser code without debug mode.
It is what I have found.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
When you said "doesn't compile in
default", do you mean generates a
compile error or dosen't compile ? If it doesn't compile, take a look
at "exclude_modules" in "Makefile". If mysql is there, remove it
and
try again. There was a time when mysql was not included by default. If
there are compile errors associated with mysql, please post them.
Regards,
Norm
unplug wrote:
>Hi,
> Thanks! But the mysql.so doesn't compile in default. I can run
>without mysql module. But failed to start openser after including
>mysql.so.
>
>On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
>
>
>>Hello,
>>
>>Maybe you have modules from different compiles mixed. One way to make
>>sure everything is at the same level is to remove all the modules from
>>/usr/local/lib/openser/modules, then recompile everything.
>>
>>We use FreeBSD here and to compile/install we generally only need to
>>perform the following two steps:
>>
>>1) gmake
>>
>>2) gmake install
>>
>>We have found that more than enough debugging information is available
>>by the generous use of xlog in our configuration files with "debug=3".
>>If you really want alot of debugging information, "debug=9" can be
used
>>in your configuration file.
>>
>>Hope this helps.
>>
>>Regards,
>>Norm
>>
>>unplug wrote:
>>
>>
>>
>>>Hi,
>>>
>>> What do you mean by different flag?
>>>I compile openser core with the following syntax
>>>make mode=debug all
>>>make prefix=/usr/local install
>>>By default, mysql won't compile.
>>>So I compile mysql with the following.
>>>make modules=modules/mysql modules
>>>
>>>
>>>On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
>>>
>>>
>>>
>>>
>>>>Hi,
>>>>
>>>>you used different flags for compiling mysql module and core -
recompile
>>>>everything with same
flag/configuration
>>>>
>>>>regards,
>>>>bogdan
>>>>
>>>>maillisting wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>I compile mysql.so with the following command.
>>>>>make modules=modules/mysql modules
>>>>>I have followed the document to configure openuser to use
SQL.
When I
>>>>>start openser, the error
message below is shown. What does it mean
>>>>>the module compile flags? Any clue?
>>>>>
>>>>>openser: ERROR: module compile flags mismatch for
>>>>>/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
>>>>>EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK,
>>>SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT
>>>module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>>>DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
>>>FAST_LOCK-ADAPTIVE_WAIT
>>>
>>><mailto:users@openser.org>
>>>
>>>_______________________________________________
>>>Users mailing list
>>>Users(a)openser.org
>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>>
>>
>>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
>
>
>
>
6:25 p.m.
go in Makdefile and look for "exclude_modules?=" - remove mysql from
there and it will compile by default.
regards,
bogdan
unplug wrote:
There is no error in the compilation. What I mean is I
need to
compile mysql.so separately. Just find out that if I compile openser
code with parameter mode=debug, this openser won't work using
mysql.so. It will work if I compile openser code without debug mode.
It is what I have found.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
When you said "doesn't compile in
default", do you mean generates a
compile error or dosen't compile ? If it doesn't compile, take a look
at "exclude_modules" in "Makefile". If mysql is there, remove it and
try again. There was a time when mysql was not included by default. If
there are compile errors associated with mysql, please post them.
Regards,
Norm
unplug wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hi,
Thanks! But the mysql.so doesn't compile in default. I can run
without mysql module. But failed to start openser after including
mysql.so.
On 12/14/05, Norman Brandinger <norm(a)goes.com> wrote:
Hello,
Maybe you have modules from different compiles mixed. One way to make
sure everything is at the same level is to remove all the modules from
/usr/local/lib/openser/modules, then recompile everything.
We use FreeBSD here and to compile/install we generally only need to
perform the following two steps:
1) gmake
2) gmake install
We have found that more than enough debugging information is available
by the generous use of xlog in our configuration files with "debug=3".
If you really want alot of debugging information, "debug=9" can be used
in your configuration file.
Hope this helps.
Regards,
Norm
unplug wrote:
>Hi,
>
>What do you mean by different flag?
>I compile openser core with the following syntax
>make mode=debug all
>make prefix=/usr/local install
>By default, mysql won't compile.
>So I compile mysql with the following.
>make modules=modules/mysql modules
>
>
>On 12/13/05, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote:
>
>
>
>
>
>
>>Hi,
>>
>>you used different flags for compiling mysql module and core - recompile
>>everything with same flag/configuration
>>
>>regards,
>>bogdan
>>
>>maillisting wrote:
>>
>>
>>
>>
>>
>>
>>
>>>I compile mysql.so with the following command.
>>>make modules=modules/mysql modules
>>>I have followed the document to configure openuser to use SQL. When I
>>>start openser, the error message below is shown. What does it mean
>>>the module compile flags? Any clue?
>>>
>>>openser: ERROR: module compile flags mismatch for
>>>/usr/local/lib/openser/modules/mysql.so core: STATS: Off,
>>>EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
>>>SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>>>module: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>>>DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
>>>FAST_LOCK-ADAPTIVE_WAIT
>>>
>>><mailto:users@openser.org>
>>>
>>>_______________________________________________
>>>Users mailing list
>>>Users(a)openser.org
>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
>
>
>
>
>
>
6918
days inactive
6919
days old
8 comments
5 participants
participants (5)
-
Bogdan-Andrei Iancu -
maillisting -
neil thomson -
Norman Brandinger -
unplug