29 May
2003
29 May
'03
5:53 p.m.
Hello everyone,
I am playing around with the new CVS ser 0.8.11pre28
downloaded couple days ago. I am attaching my config
script and also the output of syslog with errors. Afer
I start ser it starts forking new processes until it
crashes the box (fills up the memory).
The script is little advanced, uses jabber,pa,msilo...
Thanks for your help. You are doing great job. Can't
wait till next release.
Peter.
ser.cfg:
--------
#
# $Id: ser.cfg,v 1.19 2003/05/07 11:56:44 janakj Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/print.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/jabber.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"sql://nser:heslo@localhost/nser")
modparam("msilo", "db_url",
"sql://nser:heslo@localhost/nser")
#modparam("msilo", "registrar",
"sip:registrar@deimos")
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("jabber", "db_url",
"sql://sip_jab:heslo@localhost/sip_jab")
modparam("jabber", "jaddress", "test")
modparam("jabber", "jport", 5222)
modparam("jabber", "workers", 2)
modparam("jabber", "max_jobs", 10)
modparam("jabber", "aliases",
"5;aim.test;icq.test;msn.test;yahoo.test;jabber.test;")
modparam("jabber", "jdomain", "jabber.test")
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;
that's
# particularly good if upstream and downstream
entities
# use different transport protocol
record_route();
# loose-route processing
loose_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following
command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
if (search("egistration")) {
log("XJAB: going online in Jabber net\n");
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
} else {
log("XJAB: going offline in Jabber net\n");
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
}; # egistrarion
if (m_dump()) {
log("MSILO: offline msgs dumped\n");
} else {
log("MSILO: no offline msgs dumped\n");
};
break;
}; # register
if (method=="SUBSCRIBE") {
if (t_newtran()) {
handle_subscription("registrar");
};
break;
}; # subsribe
# native SIP destinations are handled using our
USRLOC DB
if (!lookup("location")) {
if (method=="MESSAGE") {
log("MESSAGE received -> storing\n");
if (!t_newtran()) {
sl_reply_error();
break;
};
if (m_store("0")) {
log("MSILO: offline msg stored\n");
if (!t_reply("202","Accepted")) {
sl_reply_error();
};
} else {
log("MSILO: offline msg not stored\n");
if (!t_reply("503","Service Unavailable")) {
sl_reply_error();
};
};
break;
}; # message
sl_send_reply("404", "Not Found");
break;
}; # lookup
}; # myself
if ( search("To:.*@aim\.test") ||
search("To:.*@icq\.test") ||
search("To:.*@msn\.test") ||
search("To:.*@yahoo\.test") ||
search("To:.*@jabber\.test") ) {
if (!t_newtran()) {
sl_reply_error();
break;
};
if (method=="MESSAGE") {
log("MESSAGE received -> manage it w/ XJAB\n");
if (search("\n:on")) {
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:off")) {
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:join")) {
if (jab_join_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:exit")) {
if (jab_exit_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (jab_send_message()) {
sl_send_reply("202", "Accepted");
} else {
sl_send_reply("503", "Service Unavailable");
};
break;
};
if (method=="SUBSCRIBE") {
handle_subscription("jabber");
break;
};
log("NON_MESSAGE request received for Jabber GW ->
dropt\n");
sl_send_reply("202", "Accepted");
break;
};
# forward to current uri now; use stateful
forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
error log from /var/log/messages:
---------------------------------
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2218] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2243] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2244] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2245] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2246] has
exited - status=0 err=-1 errno=10
May 29 10:58:40 hat dhcpd: DHCPDISCOVER from
00:90:b1:59:0e:00 via eth0: network 200.200.52.0/24:
no free leases
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2247] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2248] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2249] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2250] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2251] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2252] has
exited - status=0 err=-1 errno=10
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
30 May
30 May
11:47 a.m.
Hello,
please set first three lines to:
debug=9 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
and start SER from a console (ser -f /path/to/ser.cfg) and send us the
debug messages.
Best regards,
Daniel
On 5/29/2003 4:53 PM, Peter Kostik wrote:
Hello everyone,
I am playing around with the new CVS ser 0.8.11pre28
downloaded couple days ago. I am attaching my config
script and also the output of syslog with errors. Afer
I start ser it starts forking new processes until it
crashes the box (fills up the memory).
The script is little advanced, uses jabber,pa,msilo...
Thanks for your help. You are doing great job. Can't
wait till next release.
Peter.
ser.cfg:
--------
#
# $Id: ser.cfg,v 1.19 2003/05/07 11:56:44 janakj Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/print.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/jabber.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"sql://nser:heslo@localhost/nser")
modparam("msilo", "db_url",
"sql://nser:heslo@localhost/nser")
#modparam("msilo", "registrar",
"sip:registrar@deimos")
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("jabber", "db_url",
"sql://sip_jab:heslo@localhost/sip_jab")
modparam("jabber", "jaddress", "test")
modparam("jabber", "jport", 5222)
modparam("jabber", "workers", 2)
modparam("jabber", "max_jobs", 10)
modparam("jabber", "aliases",
"5;aim.test;icq.test;msn.test;yahoo.test;jabber.test;")
modparam("jabber", "jdomain", "jabber.test")
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;
that's
# particularly good if upstream and downstream
entities
# use different transport protocol
record_route();
# loose-route processing
loose_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following
command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
if (search("egistration")) {
log("XJAB: going online in Jabber net\n");
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
} else {
log("XJAB: going offline in Jabber net\n");
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
}; # egistrarion
if (m_dump()) {
log("MSILO: offline msgs dumped\n");
} else {
log("MSILO: no offline msgs dumped\n");
};
break;
}; # register
if (method=="SUBSCRIBE") {
if (t_newtran()) {
handle_subscription("registrar");
};
break;
}; # subsribe
# native SIP destinations are handled using our
USRLOC DB
if (!lookup("location")) {
if (method=="MESSAGE") {
log("MESSAGE received -> storing\n");
if (!t_newtran()) {
sl_reply_error();
break;
};
if (m_store("0")) {
log("MSILO: offline msg stored\n");
if (!t_reply("202","Accepted")) {
sl_reply_error();
};
} else {
log("MSILO: offline msg not stored\n");
if (!t_reply("503","Service Unavailable")) {
sl_reply_error();
};
};
break;
}; # message
sl_send_reply("404", "Not Found");
break;
}; # lookup
}; # myself
if ( search("To:.*@aim\.test") ||
search("To:.*@icq\.test") ||
search("To:.*@msn\.test") ||
search("To:.*@yahoo\.test") ||
search("To:.*@jabber\.test") ) {
if (!t_newtran()) {
sl_reply_error();
break;
};
if (method=="MESSAGE") {
log("MESSAGE received -> manage it w/ XJAB\n");
if (search("\n:on")) {
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:off")) {
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:join")) {
if (jab_join_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:exit")) {
if (jab_exit_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (jab_send_message()) {
sl_send_reply("202", "Accepted");
} else {
sl_send_reply("503", "Service Unavailable");
};
break;
};
if (method=="SUBSCRIBE") {
handle_subscription("jabber");
break;
};
log("NON_MESSAGE request received for Jabber GW ->
dropt\n");
sl_send_reply("202", "Accepted");
break;
};
# forward to current uri now; use stateful
forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
error log from /var/log/messages:
---------------------------------
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2218] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2243] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2244] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2245] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2246] has
exited - status=0 err=-1 errno=10
May 29 10:58:40 hat dhcpd: DHCPDISCOVER from
00:90:b1:59:0e:00 via eth0: network 200.200.52.0/24:
no free leases
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2247] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2248] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2249] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2250] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2251] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2252] has
exited - status=0 err=-1 errno=10
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
12:24 p.m.
Hello,
we need also the network dumps when it is happening -- use ngrep or
ethereal for that. The log show that there is some invalid To address
which might be the cause of crash.
Best regards,
Daniel
On 5/29/2003 4:53 PM, Peter Kostik wrote:
Hello everyone,
I am playing around with the new CVS ser 0.8.11pre28
downloaded couple days ago. I am attaching my config
script and also the output of syslog with errors. Afer
I start ser it starts forking new processes until it
crashes the box (fills up the memory).
The script is little advanced, uses jabber,pa,msilo...
Thanks for your help. You are doing great job. Can't
wait till next release.
Peter.
ser.cfg:
--------
#
# $Id: ser.cfg,v 1.19 2003/05/07 11:56:44 janakj Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/print.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/jabber.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"sql://nser:heslo@localhost/nser")
modparam("msilo", "db_url",
"sql://nser:heslo@localhost/nser")
#modparam("msilo", "registrar",
"sip:registrar@deimos")
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("jabber", "db_url",
"sql://sip_jab:heslo@localhost/sip_jab")
modparam("jabber", "jaddress", "test")
modparam("jabber", "jport", 5222)
modparam("jabber", "workers", 2)
modparam("jabber", "max_jobs", 10)
modparam("jabber", "aliases",
"5;aim.test;icq.test;msn.test;yahoo.test;jabber.test;")
modparam("jabber", "jdomain", "jabber.test")
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;
that's
# particularly good if upstream and downstream
entities
# use different transport protocol
record_route();
# loose-route processing
loose_route();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following
command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
if (search("egistration")) {
log("XJAB: going online in Jabber net\n");
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
} else {
log("XJAB: going offline in Jabber net\n");
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
}; # egistrarion
if (m_dump()) {
log("MSILO: offline msgs dumped\n");
} else {
log("MSILO: no offline msgs dumped\n");
};
break;
}; # register
if (method=="SUBSCRIBE") {
if (t_newtran()) {
handle_subscription("registrar");
};
break;
}; # subsribe
# native SIP destinations are handled using our
USRLOC DB
if (!lookup("location")) {
if (method=="MESSAGE") {
log("MESSAGE received -> storing\n");
if (!t_newtran()) {
sl_reply_error();
break;
};
if (m_store("0")) {
log("MSILO: offline msg stored\n");
if (!t_reply("202","Accepted")) {
sl_reply_error();
};
} else {
log("MSILO: offline msg not stored\n");
if (!t_reply("503","Service Unavailable")) {
sl_reply_error();
};
};
break;
}; # message
sl_send_reply("404", "Not Found");
break;
}; # lookup
}; # myself
if ( search("To:.*@aim\.test") ||
search("To:.*@icq\.test") ||
search("To:.*@msn\.test") ||
search("To:.*@yahoo\.test") ||
search("To:.*@jabber\.test") ) {
if (!t_newtran()) {
sl_reply_error();
break;
};
if (method=="MESSAGE") {
log("MESSAGE received -> manage it w/ XJAB\n");
if (search("\n:on")) {
if (jab_go_online()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:off")) {
if (jab_go_offline()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:join")) {
if (jab_join_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (search("\n:exit")) {
if (jab_exit_jconf()) {
sl_send_reply("200", "Accepted");
} else {
sl_send_reply("404", "Not Found");
};
break;
};
if (jab_send_message()) {
sl_send_reply("202", "Accepted");
} else {
sl_send_reply("503", "Service Unavailable");
};
break;
};
if (method=="SUBSCRIBE") {
handle_subscription("jabber");
break;
};
log("NON_MESSAGE request received for Jabber GW ->
dropt\n");
sl_send_reply("202", "Accepted");
break;
};
# forward to current uri now; use stateful
forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
error log from /var/log/messages:
---------------------------------
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
handle_subscription(): Error while sending notify
May 29 10:58:11 hat /usr/local/sbin/ser[2180]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:11 hat /usr/local/sbin/ser[2180]:
send_reply(): Error while sending 200 OK
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
parse_to: invalid To - unexpected end of header in
state -1073745156
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_xpidf_notify(): Error while
parsing
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
handle_subscription(): Error while sending notify
May 29 10:58:23 hat /usr/local/sbin/ser[2178]: ERROR:
t_reply: can't generate 200 reply when a final 200 was
sent out
May 29 10:58:23 hat /usr/local/sbin/ser[2178]:
send_reply(): Error while sending 200 OK
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2217] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2218] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2243] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2244] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2245] has
exited - status=0 err=-1 errno=10
May 29 10:58:29 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2246] has
exited - status=0 err=-1 errno=10
May 29 10:58:40 hat dhcpd: DHCPDISCOVER from
00:90:b1:59:0e:00 via eth0: network 200.200.52.0/24:
no free leases
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[0][pid=2247] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2210]:
XJAB:xjab_check_workers: worker[1][pid=2248] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[0][pid=2249] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2216]:
XJAB:xjab_check_workers: worker[1][pid=2250] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[0][pid=2251] has
exited - status=0 err=-1 errno=10
May 29 10:58:49 hat /usr/local/sbin/ser[2213]:
XJAB:xjab_check_workers: worker[1][pid=2252] has
exited - status=0 err=-1 errno=10
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
20 Jun
20 Jun
11:29 a.m.
Hello,
I guess I found the bug that was in charge with that infinite forking.
Could you get the last CVS version of SER and try again to see if the
problem is still there?
Best regards,
Daniel
On 5/29/2003 4:53 PM, Peter Kostik wrote:
Hello everyone,
I am playing around with the new CVS ser 0.8.11pre28
downloaded couple days ago. I am attaching my config
script and also the output of syslog with errors. Afer
I start ser it starts forking new processes until it
crashes the box (fills up the memory).
The script is little advanced, uses jabber,pa,msilo...
Thanks for your help. You are doing great job. Can't
wait till next release.
Peter.
21 Jun
21 Jun
2:27 a.m.
Daniel,
I am sorry I didn't reply to your request for network
dumps, but I was really tighed up with couple of other
projects and just didn't have time for SER :(
I will definitely give this CVS version a try.
Thanks again,
Peter
--- Daniel-Constantin Mierla
<mierla(a)fokus.fraunhofer.de> wrote:
Hello,
I guess I found the bug that was in charge with that
infinite forking.
Could you get the last CVS version of SER and try
again to see if the
problem is still there?
Best regards,
Daniel
On 5/29/2003 4:53 PM, Peter Kostik wrote:
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
Hello everyone,
I am playing around with the new CVS ser
0.8.11pre28
downloaded couple days ago. I am attaching my
config
script and also the output of syslog with errors.
Afer
I start ser it starts forking new processes until
it
crashes the box (fills up the memory).
The script is little advanced, uses
jabber,pa,msilo...
Thanks for your help. You are doing great job.
Can't
wait till next release.
Peter.
7826
days inactive
7848
days old
4 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Peter Kostik