Hi group, Im new in the mailing list, and starting again with Openser, last time I used was first release like an alternative to SER. Later dont run any SIP service. Actually Im testing OpenSer for a new service, voice service with PSTN, etc, and Im testing accounting via radius. I use this help to work basic things. www.openser.org/docs/openser-radius-1.0.x.html thanks for this documentation very helpful for me. But I dont get same result. My version Openser 1.2.2. I get this fields in start and stop, very less than example. Wed Dec 12 17:33:12 2007 Acct-Status-Type = Start Service-Type = SIP Sip-Response-Code = 200 Sip-Method = 1 Event-Timestamp = "Dec 12 2007 17:33:05 ART" Sip-From-Tag = "94ab8960-c82d7718-13c4-7db17-4cc178eb-7db17" Sip-To-Tag = "94b908a0-c82d7717-13c4-3815-ecb28f3-3815" Acct-Session-Id = "94ab6a20-c82d7718-13c4-7db17-7fcaa8b-7db17(a)elmejorcable.com.ar" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = xxx.xxx.xxx.3 Client-IP-Address = xxx.xxx.xxx.3 Acct-Unique-Session-Id = "49ff3575432365d6" Timestamp = 1197491592 Wed Dec 12 17:33:19 2007 Acct-Status-Type = Stop Service-Type = SIP Sip-Response-Code = 200 Sip-Method = Bye Event-Timestamp = "Dec 12 2007 17:33:11 ART" Sip-From-Tag = "94b908a0-c82d7717-13c4-3815-ecb28f3-3815" Sip-To-Tag = "94ab8960-c82d7718-13c4-7db17-4cc178eb-7db17" Acct-Session-Id = "94ab6a20-c82d7718-13c4-7db17-7fcaa8b-7db17(a)elmejorcable.com.ar" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = xxx.xxx.xxx.3 Client-IP-Address = xxx.xxx.xxx.3 Acct-Unique-Session-Id = "49ff3575432365d6" Timestamp = 1197491599 I think is about default fields to send for accounting via radius, How to get full info??? With radius_extra modparam??? Thanks in advanced. Fernando Yubero Communication Partner