Then just add the prefix funciton with the appropriate value just before sending with t_relay: /* */ prefix("333"); t_relay_to_udp("gw1.ip.address", "gw1-port") ; /* */ prefix("4444"); t_relay_to_udp("GW2.ip.address", "GW2-port"); Hope it helps, Samuel. 2006/5/27, Ryan Pagquil &lt;rpagquil(a)philonline.com&gt;om>: >Hi Andrey, > > I want SER the one to append the prefix on the Request URI. >I think this fits when the user appends a prefix... > Any suggestion? > >Thanks, >Ryan > >At 05:22 PM 5/26/2006, Andrey Kouprianov wrote: > >how about this... dont use # key. just append 3333 or 4444 to the > number, i.e. > > > >GW1 ---> 3333<phone number> > >GW2 ---> 4444<phone number> > > > > > >if(uri=~"^sip:3333.*") { > > strip(4); #if you need to get rid of first 4 > >digits (i.e. "3333") > > t_relay_to_udp("gw1.ip.address", "gw1-port") ; > >} > >else if(uri=~"^sip:4444.*") { > > strip(4); #if you need to get rid of first 4 > >digits (i.e. "4444") > > t_relay_to_udp("GW2.ip.address", "GW2-port"); > >}; > > > > > >Hope that works out for you. > > > > > >On 5/26/06, Ryan Pagquil &lt;rpagquil(a)philonline.com&gt; wrote: > >>Hi, > >> Anyone has any idea on how to do this? > >> > >>Please help.... > >> > >>Thanks, > >>Ryan > >> > >> > >> > >>At 11:15 AM 5/25/2006, Ryan Pagquil wrote: > >> >Hi SER users, > >> > > >> > I have a problem. We have two PSTN gateway providers and > >> > both of them needs different prefixes when sending request to > >> their gateway. > >> > > >> > For example: > >> > GW1 ---> 3333#<phone number> > >> > GW2 ---> 4444#<phone number> > >> > > >> >Now I'll be using these two provider with LCR, but I don't know how > >> >will I accomplish their requirements on their prefixes. Could you > >> >give me any idea about this scenario? Also how can I make LCR to > >> >failover with these gateways? > >> > > >> >Please help.... > >> > > >> >Thanks in advance, > >> >Ryan Pagquil > >> > > >> > > >> > > >> >_______________________________________________ > >> >Serusers mailing list > >> &gt;Serusers(a)lists.iptel.org > >> >http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > >>_______________________________________________ > >>Serusers mailing list > &gt;&gt;Serusers(a)lists.iptel.org > >>http://lists.iptel.org/mailman/listinfo/serusers > >_______________________________________________ > >Serusers mailing list > &gt;Serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > >_______________________________________________ >Serusers mailing list &gt;Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers

yes 2006/5/31, Ryan Pagquil &lt;rpagquil(a)philonline.com&gt;om>: >Hi samuel, > > If I use this, will it append the prefix on start of the >RURI? For example: > > RURI = sip:1234567@domain.com it will become: > > RURI = sip:44441234567@domain.com > > >Is it correct? > >Thanks, >Ryan > > > >At 05:38 PM 5/29/2006, samuel wrote: > >Then just add the prefix funciton with the appropriate value just > >before sending with t_relay: > > > >/* > > > > > >*/ > > prefix("333"); > > t_relay_to_udp("gw1.ip.address", "gw1-port") ; > >/* > > > >*/ > > prefix("4444"); > > t_relay_to_udp("GW2.ip.address", "GW2-port"); > > > >Hope it helps, > > > >Samuel. > > > >2006/5/27, Ryan Pagquil &lt;rpagquil(a)philonline.com&gt;om>: > >>Hi Andrey, > >> > >> I want SER the one to append the prefix on the Request URI. > >>I think this fits when the user appends a prefix... > >> Any suggestion? > >> > >>Thanks, > >>Ryan > >> > >>At 05:22 PM 5/26/2006, Andrey Kouprianov wrote: > >> >how about this... dont use # key. just append 3333 or 4444 to the > >> number, i.e. > >> > > >> >GW1 ---> 3333<phone number> > >> >GW2 ---> 4444<phone number> > >> > > >> > > >> >if(uri=~"^sip:3333.*") { > >> > strip(4); #if you need to get rid of first 4 > >> >digits (i.e. "3333") > >> > t_relay_to_udp("gw1.ip.address", "gw1-port") ; > >> >} > >> >else if(uri=~"^sip:4444.*") { > >> > strip(4); #if you need to get rid of first 4 > >> >digits (i.e. "4444") > >> > t_relay_to_udp("GW2.ip.address", "GW2-port"); > >> >}; > >> > > >> > > >> >Hope that works out for you. > >> > > >> > > >> >On 5/26/06, Ryan Pagquil &lt;rpagquil(a)philonline.com&gt; wrote: > >> >>Hi, > >> >> Anyone has any idea on how to do this? > >> >> > >> >>Please help.... > >> >> > >> >>Thanks, > >> >>Ryan > >> >> > >> >> > >> >> > >> >>At 11:15 AM 5/25/2006, Ryan Pagquil wrote: > >> >> >Hi SER users, > >> >> > > >> >> > I have a problem. We have two PSTN gateway providers and > >> >> > both of them needs different prefixes when sending request to > >> >> their gateway. > >> >> > > >> >> > For example: > >> >> > GW1 ---> 3333#<phone number> > >> >> > GW2 ---> 4444#<phone number> > >> >> > > >> >> >Now I'll be using these two provider with LCR, but I don't know how > >> >> >will I accomplish their requirements on their prefixes. Could you > >> >> >give me any idea about this scenario? Also how can I make LCR to > >> >> >failover with these gateways? > >> >> > > >> >> >Please help.... > >> >> > > >> >> >Thanks in advance, > >> >> >Ryan Pagquil > >> >> > > >> >> > > >> >> > > >> >> >_______________________________________________ > >> >> >Serusers mailing list > >> >> &gt;Serusers(a)lists.iptel.org > >> >> >http://lists.iptel.org/mailman/listinfo/serusers > >> >> > >> >> > >> >>_______________________________________________ > >> >>Serusers mailing list > >> &gt;&gt;Serusers(a)lists.iptel.org > >> >>http://lists.iptel.org/mailman/listinfo/serusers > >> >_______________________________________________ > >> >Serusers mailing list > >> &gt;Serusers(a)lists.iptel.org > >> >http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > >>_______________________________________________ > >>Serusers mailing list > &gt;&gt;Serusers(a)lists.iptel.org > >>http://lists.iptel.org/mailman/listinfo/serusers > >