[Serusers] caller-id with raius using sip-rpid - sr-users

2 Oct 2003

Ser doesn't appear to be passing the Caller-id to the ata at auth or I
am doing something wrong.  Can anyone point me in the right direction?

Thanks,

Stephen

I have the following entry in my freeradius users file.

test(a)voip2.test.net Auth-Type := Digest, User-Password == "test"
        Reply-Message = "Hello, test with digest", Sip-Rpid =
"8472222222"

When I run a radclient test I get the correct info..

radclient -f digest.test 219.242.10.153:1812 auth testing
Received response ID 134, code 2, length = 57
        Reply-Message = "Hello, test with digest"
        Sip-Rpid = "8472222222"

This is the output from ngrep port 5060

U 216.222.234.113:5060 -> 219.242.10.153:5060
  REGISTER sip:voip2.test.net SIP/2.0..Via: SIP/2.0/UDP
216.222.234.113:5060..
  From: sip:test@voip2.test.net;tag=277486986..To:
sip:test@voip2.test.net..Cal
  l-ID: 2687235586@216.222.234.113..CSeq: 2 REGISTER..Contact:
<sip:test@216.
  222.234.113:5060;transport=udp>;expires=120..User-Agent: Cisco ATA 186
v2.
  16.2 ata18x (030909a)..Authorization: Digest
username="test",realm="voip2.test.net",nonce="3f7c49b40e81572eff05bdf50c
867a85bbb0da3c",uri="sip:voip2.test
  .net",response="1684410c130d6faa9a3c573365f36ab6"..Content-Length:
0....
#
U 219.242.10.153:5060 -> 216.222.234.113:5060
  SIP/2.0 200 OK..Via: SIP/2.0/UDP
216.222.234.113:5060;rport=5060..From: sip
  :test@voip2.test.net;tag=277486986..To:
sip:test@voip2.test.net;tag=b27e1a1d3
  3761e85846fc98f5f3a7e58.13c2..Call-ID:
2687235586@216.222.234.113..CSeq: 2
  REGISTER..Contact:
<sip:test@216.222.234.113:5060;transport=udp>;q=0.00;exp
  ires=120..Server: Sip EXpress router (0.8.12dev-t16
(i386/linux))..Content-
  Length: 0..Warning: 392 219.242.10.153:5060 "Noisy feedback tells:
pid=121
  59 req_src_ip=216.222.234.113 req_src_port=5060
in_uri=sip:voip2.test.net ou
  t_uri=sip:voip2.test.net via_cnt==1"....