Tomasz,

I'd recomment the Getting Started document from http://onsip.org/

Regards, Paul

On 6/7/05, Tomasz Gingold tgingold@gmx.net wrote:

Hello,

i´m fairly new in SER.

After setting up the SER i tried to register at SER with the kphone. Inside the kphone i set up the Outbound proxy with the adress of the SER. When i try to REGISTER with the kphone at SER i get always also a REGISTER message back from the SER.

Kphone SER -----REGISTER---------> <----REGISTER---------- (the first REGISTER follow 3xREGISTER back) <----REGISTER---------- <----REGISTER---------- -----REGISTER---------> <----REGISTER---------- -----REGISTER---------> <----REGISTER---------- -----REGISTER---------> <----REGISTER---------- ... <----403 Timeout-------

It looks like the SER doesn't go into the routing logic. I modify the ser.cfg in this way to check this.

route { sl_send_reply("420","Bad Extension");

After this nothing has changed in the packet flow described before. No 420 replys are beeing send back.

I know that this is not a detailed description of my problem.Anyhow i hope that anybody can give me some tips.

thanks in advance tomasz g.

-- Geschenkt: 3 Monate GMX ProMail gratis + 3 Ausgaben stern gratis ++ Jetzt anmelden & testen ++ http://www.gmx.net/de/go/promail ++

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

At kphone, your configuration must be as the following:

Full Name: <Your name if you wish> User Part of SIP URL: <username, ex 11112> Host Part of SIP URL: <IP or domain name of your server. ex: mysipserver.com> Outbound Proxy (Optional): <NOTHING MUST BE PUT HERE> Authentication Username: <if you have , use username for auth. ex: 11116> q-valeu between 0.0-1.0: <NOTHING>

After configuring all the steps, click the "Auto Register" option then click OK. Kphone you tell you that this configuration only works after re-opening the program. Close it and re-open. If everything goes fine, you will only be ask for the password.

[]'s I hope it helps you ...