Hi, I want to implement the call control by
1. Validating the CLI and get the credit from DB 2. Check the Rate for the dialed number 3. set the call timeout for the call duration. ( credit/rate) 4. pass the call to remote PSTN GW
Please guide me on this.
Regards, Roy.
Hi all,
What is the difference between "Called number address in Request-Line" and "Called number in TO field"?
If the "Called Number" address is different which one shall be taken? Is there any RFC recommendation governing this?
For example : if in "REQUEST-LINE" it is 61977 and in "TO" it is 00977. Which (61977 or 00977) shall be used to look for routing purpose?
Thanks a lot.
Amar S Tuladhar
The Request URI (request line) is the one that should be used for any routing purpose. The To field is a purely cosmetic commentary on the intended logical destination of the call--it should never be used for routing determination.
Amar S Tuladhar amar@smarttel.com.np wrote:
Hi all,
What is the difference between "Called number address in Request-Line" and "Called number in TO field"?
If the "Called Number" address is different which one shall be taken? Is there any RFC recommendation governing this?
For example : if in "REQUEST-LINE" it is 61977 and in "TO" it is 00977. Which (61977 or 00977) shall be used to look for routing purpose?
Thanks a lot.
Amar S Tuladhar
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Sent from my mobile, and thus lacking in the refinement one might expect from a fully fledged keyboard.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 United States Tel: +1-678-954-0671 Web: http://www.evaristesys.com/, http://www.alexbalashov.com
-
Alex Balashov -
Amar S Tuladhar -
Raj Roy Ghandhi