Hello,
I got problem with the radius accounting, I am getting accounting packets but they doesn’t mention start or stop time of call rather all the time saying Acct-Status-Type = Failed
Here is one packet
Tue Nov 21 17:34:58 2006
Acct-Status-Type = Failed
Service-Type = IAPP-AP-Check
Sip-Response-Code = 487
Sip-Method = 1
User-Name = "211069021@xxx.pt"
Calling-Station-Id = "sip:211069021@xxx.pt"
Called-Station-Id = "sip:0969830612@xx.pt"
Sip-Translated-Request-URI = "sip:09643243612@22.18.31.10"
Acct-Session-Id = "597816CF-EFCF-4AD8-B61D-F34301FE0B1B@192.168.0.47"
Sip-To-Tag = "38CA5520-DF9"
Sip-From-Tag = "26232679627249"
Sip-Cseq = "2"
NAS-Port = 5060
Acct-Delay-Time = 0
NAS-IP-Address = 127.0.0.1
Client-IP-Address = 127.0.0.1
Acct-Unique-Session-Id = "d26959cb062c7786"
Timestamp = 1164130498
I looked into the dictionary.ser which is present in /usr/local/etc/ser/dictionary.ser and that dictionary had commented out start and stop attributes. If I uncomment them and comment Failed attribute then ser gets crashed.
According to ser-radius how to… .. there should be a dictionary.ser file in /usr/local/etc/radiusclient-ng/ directory, but I tried different versions of radiusclient-ng.. it doesn’t come with any of the version, though documents mention it comes with radiusclient-ng library.
Though I tried many options with the dictionary.ser file by including it in radiusclient-ng and in freeradius server, but no success.
I followed exactly the ser-radius how to but no luck . infact tried with many other probable configure options but it is just not getting solved.
I am using ser-0.9.6 version
Please help
I will be very thank full
Lokesh
Lokesh, You need to have the same dictionary for the server and the client. radiusclient-ng is the client library used as ser client and freeradius is the server. radiusclient.conf is used to configure the client library. g-)
Lokesh Kumar wrote:
Hello,
I got problem with the radius accounting, I am getting accounting packets but they doesn’t mention start or stop time of call rather all the time saying Acct-Status-Type = Failed
Here is one packet
Tue Nov 21 17:34:58 2006
Acct-Status-Type = Failed Service-Type = IAPP-AP-Check Sip-Response-Code = 487 Sip-Method = 1 User-Name = "211069021@xxx.pt" Calling-Station-Id = "sip:211069021@xxx.pt" Called-Station-Id = "sip:0969830612@xx.pt" Sip-Translated-Request-URI = "sip:09643243612@22.18.31.10" Acct-Session-Id ="597816CF-EFCF-4AD8-B61D-F34301FE0B1B@192.168.0.47"
Sip-To-Tag = "38CA5520-DF9" Sip-From-Tag = "26232679627249" Sip-Cseq = "2" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 127.0.0.1 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "d26959cb062c7786" Timestamp = 1164130498I looked into the dictionary.ser which is present in /usr/local/etc/ser/dictionary.ser and that dictionary had commented out start and stop attributes. If I uncomment them and comment Failed attribute then ser gets crashed.
According to ser-radius how to… .. there should be a dictionary.ser file in /usr/local/etc/radiusclient-ng/ directory, but I tried different versions of radiusclient-ng.. it doesn’t come with any of the version, though documents mention it comes with radiusclient-ng library.
Though I tried many options with the dictionary.ser file by including it in radiusclient-ng and in freeradius server, but no success.
I followed exactly the ser-radius how to but no luck . infact tried with many other probable configure options but it is just not getting solved.
I am using ser-0.9.6 version
Please help
I will be very thank full
Lokesh
-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.409 / Virus Database: 268.14.11/543 - Release Date: 11/20/2006
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Greger V. Teigre -
Lokesh Kumar