I think there is a couple of working examples now.. my cfg file is per now running nothing. since my server is just used as a dumb proxy. -Atle * gaillac harry &lt;gaillacharry(a)yahoo.fr&gt; [040423 14:31]: > I agree you but could you send me back a ser.cfg file with missed calls, > send IM, voicemail capacities ? > > you would help me !! > > Harry > > Le ven 23/04/2004 ?? 07:53, Atle Samuelsen a ??crit : > > I'm not a developer myself.. but google is my friend :) > > I think alot of the questions you have adde here is alreaddy answerd > > before on the mailing-lists. > > > > > > -Atle > > > > * gaillac harry &lt;gaillacharry(a)yahoo.fr&gt; [040423 01:53]: > > > hello atle, > > > > > > I waste to much time with SER+SEMS+SERWEB I'm not a delopper, I've tried > > > my best to configure SER without a great success. > > > I'm about to look at Snom products. > > > > > > Many thanks all > > > Harry > > > > > > > > > Le jeu 22/04/2004 ?? 21:40, Atle Samuelsen a ??crit : > > > > www.google.com > > > > acc +mysql :host mail.iptel.org > > > > > > > > have'nt testet it.. but I know that you are not the first one who has > > > > had that problem. > > > > > > > > -atle > > > > > > > > * gaillac harry &lt;gaillacharry(a)yahoo.fr&gt; [040422 17:06]: > > > > > your're right > > > > > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile. > > > > > Where Could I find that information? > > > > > Regards > > > > > > > > > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit : > > > > > > If I dont rember TOO wrong, I think there is a option you have forgot'n > > > > > > in the Makefile for the acc.module that says if it uses a database or > > > > > > not. > > > > > > > > > > > > > > > > > > - Atle > > > > > > > > > > > > > > > > > > * gaillac harry &lt;gaillacharry(a)yahoo.fr&gt; [040422 16:29]: > > > > > > > Here is my ser.cfg.SER don't start because of acc module > > > > > > > anybody could help me to solved this problem before an other ? > > > > > > > > > > > > > > ser -c => > > > > > > > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > > > > > > > <acc> > > > > > > > 0(6238) parse error (96,60-61): Can't set module parameter > > > > > > > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > > > > > > > module <acc> > > > > > > > 0(6238) parse error (97,36-37): Can't set module parameter > > > > > > > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > > > > > > > > > > > > > ERROR: bad config file (3 errors) > > > > > > > > > > > > > > regards > > > > > > > > > > > > > > > > > > > > > # > > > > > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > > > > > > # > > > > > > > # simple quick-start config script > > > > > > > # > > > > > > > > > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > > > #fork=yes > > > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > > > > > /* Uncomment these lines to enter debugging mode > > > > > > > debug=9 > > > > > > > fork=yes > > > > > > > log_stderror=yes > > > > > > > */ > > > > > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > > > dns=no # (cmd. line: -r) > > > > > > > rev_dns=no # (cmd. line: -R) > > > > > > > port=5060 > > > > > > > listen=192.168.0.1 > > > > > > > children=4 > > > > > > > fifo="/tmp/ser_fifo" > > > > > > > fifo_mode=0666 > > > > > > > #alias="example.com" > > > > > > > # ------------------ module:wq loading > > > > > > > ---------------------------------- > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > > > > > > > > > > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > > > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > > > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > > > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > > > > > loadmodule "/usr/lib/ser/modules/domain.so" > > > > > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > > > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > > > > > loadmodule "/usr/lib/ser/modules/msilo.so" > > > > > > > loadmodule "/usr/lib/ser/modules/vm.so" > > > > > > > loadmodule "/usr/lib/ser/modules/acc.so" > > > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > > # mysql.so must be loaded ! > > > > > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > > > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > # for persistent storage and comment the previous line > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > modparam("usrloc", "db_mode", 1) > > > > > > > #modparam("usrloc", "use_domain", 1) > > > > > > > > > > > > > > # --register params-- > > > > > > > modparam("registrar", "use_domain", 1) > > > > > > > > > > > > > > # -- auth params -- > > > > > > > # Uncomment if you are using auth module > > > > > > > # > > > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > > > # > > > > > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > > > > > config), > > > > > > > # uncomment also the following parameter) > > > > > > > # > > > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > > > > > # -- rr params -- > > > > > > > # add value to ;lr param to make some broken UAs happy > > > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > > > > > # --domain module-- > > > > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > modparam("domain", "db_mode", 1) > > > > > > > modparam("domain", "domain_table", "domain") > > > > > > > modparam("domain", "domain_col", "domain") > > > > > > > > > > > > > > # --msilo params-- > > > > > > > modparam("msilo", "registrar", "sip:registrar@example.com") > > > > > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > # --vm params-- > > > > > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > > > > > > > > # --acc params-- > > > > > > > modparam("acc", "log_level", 1) > > > > > > > modparam("acc", "log_flag", 2) > > > > > > > modparam("acc", "log_missed_flag", 2) > > > > > > > modparam("acc", "log_fmt", "fimos") > > > > > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > > > > > > > modparam("acc", "db_missed_flag", 2) > > > > > > > > > > > > > > # ------------------------- request routing logic ------------------- > > > > > > > > > > > > > > # main routing logic > > > > > > > > > > > > > > route{ > > > > > > > > > > > > > > # initial sanity checks -- messages with > > > > > > > # max_forwards==0, or excessively long requests > > > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > > > sl_send_reply("483","Too Many Hops"); > > > > > > > break; > > > > > > > }; > > > > > > > if ( msg:len > max_len ) { > > > > > > > sl_send_reply("513", "Message too big"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > > > # subsequent messages will go through our proxy; that's > > > > > > > # particularly good if upstream and downstream entities > > > > > > > # use different transport protocol > > > > > > > record_route(); > > > > > > > # loose-route processing > > > > > > > if (loose_route()) { > > > > > > > t_relay(); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > > > # (in case, it does not work, use the following command > > > > > > > # with proper names and addresses in it) > > > > > > > if (is_from_local()) { > > > > > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > > > if (!www_authorize("", "subscriber")) { > > > > > > > www_challenge("", "0"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > save("location"); > > > > > > > m_dump(); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > # native SIP destinations are handled using our USRLOC DB > > > > > > > lookup("aliases"); > > > > > > > if (!lookup("location")) { > > > > > > > > > > > > > > if (method == "MESSAGE") { > > > > > > > if (!t_newtran()) { > > > > > > > sl_reply_error(); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > if (m_store("0")) { > > > > > > > t_reply("202", "Accepted for Later Delivery"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > t_reply("503", "Service Unavailable"); > > > > > > > break; > > > > > > > }; > > > > > > > }; > > > > > > > > > > > > > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > > > > > > > t_reply("404", "Not Found"); > > > > > > > route(3); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > setflag(2); > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > t_on_failure("1"); > > > > > > > # forward to current uri now; use stateful forwarding; that > > > > > > > # works reliably even if we forward from TCP to UDP > > > > > > > if (!t_relay()) { > > > > > > > sl_reply_error(); > > > > > > > }; > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > route[3] { > > > > > > > > > > > > > > # non-Voip -- just send "off-line" > > > > > > > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > > > > > > > sl_send_reply("404", "Not Found"); > > > > > > > break; > > > > > > > }; > > > > > > > if (t_newtran()) { > > > > > > > t_reply("404", "Not Found"); > > > > > > > acc_db_request("404 missed call", "missed_calls"); > > > > > > > > > > > > > > }; > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >