22 May
2007
22 May
'07
12:03 p.m.
Hi,
At the moment I am using SVN version of OpenSER (2:2253M) also I have
been using the 1.2 release. The problem has been the NOTIFY message
which has been dropping time to time, or like in current svn release, I
do not get the NOTIFY message at all anymore. I think my openser.cfg is
having something wrong, but haven't been able to figure out what is the
reason.
I do use XCAP_Lite 1.0.0 with presence & presence_xml modules. The
force_active is set to "0", because I want to have reactive buddy
authorization. The XCAP side works nicely, also watchers and
active_watchers are populated by OpenSER correctly. But once the
SUBSCRIBE is received from client, no NOTIFY is sent to any clients
which are active in watchers table.
After reading the log file I found this message from it:
0(4415) PRESENCE: publ_notify: Could not get subs_dialog from database
Thank you for tips,
-Mika Saari
22 May
22 May
1:05 p.m.
Hello,
What happens is that the changes in authorization are not effective in
reall time. Therefore, if you change the autorization , that is if you
click allow in the prompt box, the subscription will not pass in
active state imediately. The refresh occurs when a new Subscription from
the watchers is received, either a refresh of expires or a new one.
If you want to test that it works - you can either set the value of
presence modules parameter max_expires to a small value or restart the
the phone after having allowed.
regards,
Anca Vamanu
mika.saari(a)wipsl.com wrote:
Hi,
At the moment I am using SVN version of OpenSER (2:2253M) also I have
been using the 1.2 release. The problem has been the NOTIFY message
which has been dropping time to time, or like in current svn release, I
do not get the NOTIFY message at all anymore. I think my openser.cfg is
having something wrong, but haven't been able to figure out what is the
reason.
I do use XCAP_Lite 1.0.0 with presence & presence_xml modules. The
force_active is set to "0", because I want to have reactive buddy
authorization. The XCAP side works nicely, also watchers and
active_watchers are populated by OpenSER correctly. But once the
SUBSCRIBE is received from client, no NOTIFY is sent to any clients
which are active in watchers table.
After reading the log file I found this message from it:
0(4415) PRESENCE: publ_notify: Could not get subs_dialog from database
Thank you for tips,
-Mika Saari
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
1:27 p.m.
Hi,
I removed all the buddy information from my EyeBeam 1.5.14, cleared
active_watchers, watchers and xcap_xml and restarted the server. Then
executed one eyebeam 1.5.14 and created new buddy entry with enabled
presence information. Then I executed up the second eyebeam 1.5.14 with
correct SIP URI, but still only PUBLISH message was sent but no NOTIFY.
Watchers table do have correct "pending" valued subs_status. Also tested
to add another buddy to the second client and restarted the first
client, but no NOTIFY.
I checked the code a bit and also the logs. The code is trying to lookup
event = presence.winfo but there is only event = presence in
active_watchers. Though I do not know if this effects anyway ? The
active_watchers is cleaned up pretty soon after it is populated by
OpenSER, but the watchers table stays in order.
Thank you for any info,
-Mika Saari
Hello,
What happens is that the changes in authorization are not effective in
reall time. Therefore, if you change the autorization , that is if you
click allow in the prompt box, the subscription will not pass in
active state imediately. The refresh occurs when a new Subscription from
the watchers is received, either a refresh of expires or a new one.
If you want to test that it works - you can either set the value of
presence modules parameter max_expires to a small value or restart the
the phone after having allowed.
regards,
Anca Vamanu
mika.saari(a)wipsl.com wrote:
Hi,
At the moment I am using SVN version of OpenSER (2:2253M) also I have
been using the 1.2 release. The problem has been the NOTIFY message
which has been dropping time to time, or like in current svn release, I
do not get the NOTIFY message at all anymore. I think my openser.cfg is
having something wrong, but haven't been able to figure out what is the
reason.
I do use XCAP_Lite 1.0.0 with presence & presence_xml modules. The
force_active is set to "0", because I want to have reactive buddy
authorization. The XCAP side works nicely, also watchers and
active_watchers are populated by OpenSER correctly. But once the
SUBSCRIBE is received from client, no NOTIFY is sent to any clients
which are active in watchers table.
After reading the log file I found this message from it:
0(4415) PRESENCE: publ_notify: Could not get subs_dialog from database
Thank you for tips,
-Mika Saari
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
1:38 p.m.
Hi,
Something is not working right there. You should have Notify messages
even though the subscription state is pending.
Please send a part of the openser log when one phone registers and the
message trace.
regards,
Anca
mika.saari(a)wipsl.com wrote:
Hi,
I removed all the buddy information from my EyeBeam 1.5.14, cleared
active_watchers, watchers and xcap_xml and restarted the server. Then
executed one eyebeam 1.5.14 and created new buddy entry with enabled
presence information. Then I executed up the second eyebeam 1.5.14 with
correct SIP URI, but still only PUBLISH message was sent but no NOTIFY.
Watchers table do have correct "pending" valued subs_status. Also tested
to add another buddy to the second client and restarted the first
client, but no NOTIFY.
I checked the code a bit and also the logs. The code is trying to lookup
event = presence.winfo but there is only event = presence in
active_watchers. Though I do not know if this effects anyway ? The
active_watchers is cleaned up pretty soon after it is populated by
OpenSER, but the watchers table stays in order.
Thank you for any info,
-Mika Saari
Hello,
What happens is that the changes in authorization are not effective in
reall time. Therefore, if you change the autorization , that is if you
click allow in the prompt box, the subscription will not pass in
active state imediately. The refresh occurs when a new Subscription from
the watchers is received, either a refresh of expires or a new one.
If you want to test that it works - you can either set the value of
presence modules parameter max_expires to a small value or restart the
the phone after having allowed.
regards,
Anca Vamanu
mika.saari(a)wipsl.com wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hi,
At the moment I am using SVN version of OpenSER (2:2253M) also I have
been using the 1.2 release. The problem has been the NOTIFY message
which has been dropping time to time, or like in current svn release, I
do not get the NOTIFY message at all anymore. I think my openser.cfg is
having something wrong, but haven't been able to figure out what is the
reason.
I do use XCAP_Lite 1.0.0 with presence & presence_xml modules. The
force_active is set to "0", because I want to have reactive buddy
authorization. The XCAP side works nicely, also watchers and
active_watchers are populated by OpenSER correctly. But once the
SUBSCRIBE is received from client, no NOTIFY is sent to any clients
which are active in watchers table.
After reading the log file I found this message from it:
0(4415) PRESENCE: publ_notify: Could not get subs_dialog from database
Thank you for tips,
-Mika Saari
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6399
days inactive
6399
days old
3 comments
2 participants
participants (2)
-
Anca-Maria Vamanu -
mika.saari＠wipsl.com