25 Sep
2006
25 Sep
'06
5:44 p.m.
I used to be able to create user accounts by issuing the following SER
command:
serctl add UserName UserPassword UserName@email
Openser documentation gives the example
openserctl add UserName UserPassword UserName@Email
But when I do this I get the following error
WARINIG: no database engine found - tried ''
This command requires a database engine - none was loaded
So how do you use openserctl to create new users?
Thanks....Chris
25 Sep
25 Sep
8:22 p.m.
You have to setup a database (for example mysql) for openser before you
can add users.
/Klaus
Chris Robson wrote:
I used to be able to create user accounts by issuing the following SER
command:
serctl add UserName UserPassword UserName@email
Openser documentation gives the example
openserctl add UserName UserPassword UserName@Email
But when I do this I get the following error
WARINIG: no database engine found - tried ''
This command requires a database engine - none was loaded
So how do you use openserctl to create new users?
Thanks....Chris
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11:07 p.m.
Thanks for the reply, but I had already setup the mysql database, to
include adding the new "presence" DB entries. what I see is the
openserctl utilities "help" doesnt show what the command line is so has
it been removed? Or is the commandline string been changed from what
onbe did with the SERctl utility?
Thanks
Klaus Fleischmann wrote:
You have to setup a database (for example mysql) for
openser before
you can add users.
/Klaus
Chris Robson wrote:
--
Christopher L Robson
Senior Computer Scientist
Naval Research Laboratory
Code 5591
4555 Overlook Ave
Washington, D.C. 20375
(V)202-404-3138
(NRL IM)Chris.Robson@GIGEF
(VoIP)2024043138@GIGEF
(MSN IM)chrislrobson(a)hotmail.com
(AOL IM)chrislrobson
I used to be able to create user accounts by issuing the following
SER command:
serctl add UserName UserPassword UserName@email
Openser documentation gives the example
openserctl add UserName UserPassword UserName@Email
But when I do this I get the following error
WARINIG: no database engine found - tried ''
This command requires a database engine - none was loaded
So how do you use openserctl to create new users?
Thanks....Chris
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11:16 p.m.
On 09/25/06 23:07, Chris Robson wrote:
Thanks for the reply, but I had already setup the mysql database, to
include adding the new "presence" DB entries. what I see is the
openserctl utilities "help" doesnt show what the command line is so
has it been removed?
Did you load database engine for openserctl?
http://openser.org/dokuwiki/doku.php?id=migrating_openser_v1.0.x_to_v1.1.x#…
If you do not load a DB engine, all commands that are depending upon are
disabled.
Cheers,
Daniel
Or is the commandline string been changed from what
onbe did with
the SERctl utility?
Thanks
Klaus Fleischmann wrote:
You have to setup a database (for example mysql)
for openser before
you can add users.
/Klaus
Chris Robson wrote:
I used to be able to create user accounts by issuing the following
SER command:
serctl add UserName UserPassword UserName@email
Openser documentation gives the example
openserctl add UserName UserPassword UserName@Email
But when I do this I get the following error
WARINIG: no database engine found - tried ''
This command requires a database engine - none was loaded
So how do you use openserctl to create new users?
Thanks....Chris
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
26 Sep
26 Sep
5:09 a.m.
Hi,
i remember reading about similiar situation and this was the thread with fix
info at voipuser.org:
http://www.voipuser.org/forum_topic_6229.html
Hope it helps.
jwhsel
From: Daniel-Constantin Mierla
<daniel(a)voice-system.ro>
Reply-To: daniel(a)voice-system.ro
To: Chris.Robson(a)nrl.navy.mil
CC: users(a)openser.org
Subject: Re: [Users] creating user accounts
Date: Mon, 25 Sep 2006 23:16:55 +0300
On 09/25/06 23:07, Chris Robson wrote:
Thanks for the reply, but I had already setup the mysql database, to
include adding the new "presence" DB entries. what I see is the
openserctl utilities "help" doesnt show what the command line is so has it
been removed?
Did you load database engine for openserctl?
http://openser.org/dokuwiki/doku.php?id=migrating_openser_v1.0.x_to_v1.1.x#…
If you do not load a DB engine, all commands that are depending upon are
disabled.
Cheers,
Daniel
Or is the commandline string been changed from
what onbe did with the
SERctl utility?
Thanks
Klaus Fleischmann wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users You have to setup a database (for example mysql)
for openser before you
can add users.
/Klaus
Chris Robson wrote:
I used to be able to create user accounts by issuing the following SER
command:
serctl add UserName UserPassword UserName@email
Openser documentation gives the example
openserctl add UserName UserPassword UserName@Email
But when I do this I get the following error
WARINIG: no database engine found - tried ''
This command requires a database engine - none was loaded
So how do you use openserctl to create new users?
Thanks....Chris
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
12:13 p.m.
Well I got this to work. I want to thank all for replying. Actually I
havent figured out what is causing the problem and hopefully time will
be available to get a better idea why the problem occurred. To get it
to work I specifically state the install path as follows: "make
prefix=/usr/local install". Ergo the needed files are installed into
the path "/usr/local/lib/openser/openserctl". If "make install" is
executed to install the files, then files are installed into the path
"/usr/local/openser-1.2.0-presence". Then by setting
"PATH=/usr/local/openser-1.2.0-presence/sbin:$PATH" one would assume
things would work fine, aka the "which" command will point to the
correct openserctl path. However, what seems to happen is the needed
openserctl files cant be found.
Anyway, later I will try and pinpoint what path setting needs to happen
to better correct this problem, right now performing the "make
prefix=/usr/local install" sequence cures the problem.
Thanks again.....Chris
John Shellhouse wrote:
Hi,
i remember reading about similiar situation and this was the thread
with fix info at voipuser.org:
http://www.voipuser.org/forum_topic_6229.html
Hope it helps.
jwhsel
From: Daniel-Constantin Mierla
<daniel(a)voice-system.ro>
Reply-To: daniel(a)voice-system.ro
To: Chris.Robson(a)nrl.navy.mil
CC: users(a)openser.org
Subject: Re: [Users] creating user accounts
Date: Mon, 25 Sep 2006 23:16:55 +0300
On 09/25/06 23:07, Chris Robson wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Thanks for the reply, but I had already setup the mysql database, to
include adding the new "presence" DB entries. what I see is the
openserctl utilities "help" doesnt show what the command line is so
has it been removed?
Did you load database engine for openserctl?
http://openser.org/dokuwiki/doku.php?id=migrating_openser_v1.0.x_to_v1.1.x#…
If you do not load a DB engine, all commands that are depending upon
are disabled.
Cheers,
Daniel
Or is the commandline string been changed from
what onbe did with
the SERctl utility?
Thanks
Klaus Fleischmann wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users You have to setup a database (for example mysql)
for openser before
you can add users.
/Klaus
Chris Robson wrote:
>
> I used to be able to create user accounts by issuing the following
> SER command:
>
> serctl add UserName UserPassword UserName@email
>
> Openser documentation gives the example
>
> openserctl add UserName UserPassword UserName@Email
>
> But when I do this I get the following error
>
> WARINIG: no database engine found - tried ''
> This command requires a database engine - none was loaded
>
> So how do you use openserctl to create new users?
>
> Thanks....Chris
>
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
7 Oct
7 Oct
6:45 p.m.
Has anyone gotten Windows Messenger 5.1 (which supports SIP) to work
with the OpenSER Presence Release yet? The clients register OK put I
never see Windows Mesenger sending out a "PUBLISH" to the server (using
Ethereal to track packet to see this) which is the behavior I see when
using Gaim 2.0Beta3 on Linux
Also I'm having problems sending text from a Windows XP Gaim 2.0Beta3
client to a Linux Gaim 2.0Beta3 client yet going from the Linux client
"to" the Windows XP Gaim client works.
Thanks
--
Christopher L Robson
Senior Computer Scientist
Naval Research Laboratory
Code 5591
4555 Overlook Ave
Washington, D.C. 20375
(V)202-404-3138
(NRL IM)Chris.Robson@GIGEF
(VoIP)2024043138@GIGEF
(MSN IM)chrislrobson(a)hotmail.com
(AOL IM)chrislrobson
6651
days inactive
6663
days old
6 comments
4 participants
participants (4)
-
Chris Robson -
Daniel-Constantin Mierla -
John Shellhouse -
kgfleischmann＠t-online.de