Hi Nair, Simple way to this problem, change ser.cfg like this:
# if (!mf_process_maxfwd_header("70")) { # sl_send_reply("483","Too Many Hops"); # break; # };
Wangji -----原始邮件----- 发件人: serusers-bounces@iptel.org [mailto:serusers-bounces@iptel.org]代表 Nair 发送时间: 2004年2月21日 18:13 收件人: Seruser 主题: [Serusers] SIP/2.0 483 Too Many Hops ??
hi all,
I am trying to use SER as below:
UA1>>>>>>>>>B2BUA>>>>>>>>SER------>GW
UA1:192.168.10.198 B2BUA:192.168.10.144 SER:192.168.10.1 GW:192.168.10.156
When i try to make calls from UA1 i am getting mesg "SIP/2.0 483 Too Many Hops"
what cud be wrong??
regards manu.
------------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Mail SpamGuard - Read only the mail you want.
Hello, this way may not solve the problem -- if it is a loop there is more traffic but will end in the same way. Watch the network traffic with ngrep or ethereal to see what happens there.
.Daniel
On 2/21/2004 1:00 PM, wangji wrote:
Hi Nair, Simple way to this problem, change ser.cfg like this:
# if (!mf_process_maxfwd_header("70")) { # sl_send_reply("483","Too Many Hops"); # break; # };
Wangji
-----原始邮件----- *发件人:* serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]*代表 *Nair *发送时间:* 2004年2月21日 18:13 *收件人:* Seruser *主题:* [Serusers] SIP/2.0 483 Too Many Hops ?? hi all, I am trying to use SER as below: UA1>>>>>>>>>B2BUA>>>>>>>>SER------>GW UA1:192.168.10.198 B2BUA:192.168.10.144 SER:192.168.10.1 GW:192.168.10.156 When i try to make calls from UA1 i am getting mesg "SIP/2.0 483 Too Many Hops" what cud be wrong?? regards manu. ------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Mail SpamGuard <http://us.rd.yahoo.com/mailtag_us/*http://antispam.yahoo.com/tools?tool=1> - Read only the mail you want.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Daniel-Constantin Mierla -
wangji