13 Oct
2005
13 Oct
'05
1:23 a.m.
Hello list,
I'm reading the documentation for AVPOPS, and Im a little confused in this
section:
----------------------------------------------------------------------------
-----
#avp_db_load(source,name)
#Loads from DB into memory the AVPs corresponding to the given source.
Meaning of the parameters is as follows:
source - what info is used for identifying the AVPs. Parameter syntax:
source = (sip_uri)['/'('username'|'domain')]) | (avp_alias) |
str_value
sip_uri = '$from' | '$to' | '$ruri'
name - which AVPs will be loaded from DB into memory. Parameter syntax is:
name = avp_spec['/'(table_name|'$'db_scheme)]
avp_spec = ''|'s:'|'i:'|avp_name|avp_alias
Example 1-12. avp_db_load usage
...
avp_db_load("$from","i:678");
avp_db_load("$ruri/domain","i:/domain_preferences");
avp_db_load("$uuid","s:404fwd/fwd_table");
avp_db_load("$ruri","i:123/$some_scheme");
...
----------------------------------------------------------------------------
-----
My question are:
Can someone explain the source syntax?
Can someone explain the name syntax?
what are i:, s:, avp_name and avp_alias?
Thanks!
Lenir
13 Oct
13 Oct
4:14 a.m.
Hi
I think you have the source syntax written below in the avp_db_load
statements
so the source will have $from or $to or $ruri optionally followed by the
words "username" or domain
eg
avp_db_load($from/username) of avp_db_load($to/domain) ---note these are
not completed syntax
OR instead of the sip_uri which is $from,$to,$ruri you can have avp_alias
which is exactly what it says, its an alias,
Str_value this is the number directly related to the predefined alias in
the line above
The name can be a string S:
interger i:
or you can leave out the S: and just use the name
or of course an alias
I know thats probably not clear...in fact I just read it myself, the best
thing with avpops , is to look at the db, and create a few, and then see
how to pop them out and play with 'em
Iqbal
On 10/12/2005, "Lenir" <lenirsantiago(a)yahoo.com> wrote:
Hello list,
I'm reading the documentation for AVPOPS, and Im a little confused in this
section:
----------------------------------------------------------------------------
-----
#avp_db_load(source,name)
#Loads from DB into memory the AVPs corresponding to the given source.
Meaning of the parameters is as follows:
source - what info is used for identifying the AVPs. Parameter syntax:
source = (sip_uri)['/'('username'|'domain')]) | (avp_alias) |
str_value
sip_uri = '$from' | '$to' | '$ruri'
name - which AVPs will be loaded from DB into memory. Parameter syntax is:
name = avp_spec['/'(table_name|'$'db_scheme)]
avp_spec = ''|'s:'|'i:'|avp_name|avp_alias
Example 1-12. avp_db_load usage
....
avp_db_load("$from","i:678");
avp_db_load("$ruri/domain","i:/domain_preferences");
avp_db_load("$uuid","s:404fwd/fwd_table");
avp_db_load("$ruri","i:123/$some_scheme");
....
----------------------------------------------------------------------------
-----
My question are:
Can someone explain the source syntax?
Can someone explain the name syntax?
what are i:, s:, avp_name and avp_alias?
Thanks!
Lenir
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
19 Oct
19 Oct
10:27 p.m.
Hi SerUsers!
I'm completly crazy tryin' to do the following:
I just want to load from DB user alias and rewrite it into "$to
$ruri", because these calls shoud go directly to asterisk voicemail
and they are numerical not alphanumeric.
i tried to do the following:
if(avp_db_load($alias/$username,i:alias")
avp_pushto("$ruri/$to","alias")
just to load from alias table username into an integer called alias
and then pushed to new $ruri.
I'm new in ser and avps module it's really usefull but a little bit
"unreadable", plz this should work for tomorrow :$ any help plz!?
be as much especific as can, because i don't know if i have done the
proper modparams.
these are:
modparam("avpops", "avp_url",
"mysql://ser:heslo@localhost/ser")
modparam("avpops", "avp_table", "usr_preferences")
#modparam("avpops", "use_domain", "1")
modparam("avpops", "uuid_column", "uuid")
modparam("avpops", "username_column", "username")
modparam("avpops", "domain_column", "domain")
modparam("avpops", "attribute_column", "attribute")
modparam("avpops", "value_column", "value")
modparam("avpops", "type_column", "type")
THX
On 10/13/05, Iqbal <iqbal(a)gigo.co.uk> wrote:
Hi
I think you have the source syntax written below in the avp_db_load
statements
so the source will have $from or $to or $ruri optionally followed by the
words "username" or domain
eg
avp_db_load($from/username) of avp_db_load($to/domain) ---note these are
not completed syntax
OR instead of the sip_uri which is $from,$to,$ruri you can have avp_alias
which is exactly what it says, its an alias,
Str_value this is the number directly related to the predefined alias in
the line above
The name can be a string S:
interger i:
or you can leave out the S: and just use the name
or of course an alias
I know thats probably not clear...in fact I just read it myself, the best
thing with avpops , is to look at the db, and create a few, and then see
how to pop them out and play with 'em
Iqbal
On 10/12/2005, "Lenir" <lenirsantiago(a)yahoo.com> wrote:
Hello list,
I'm reading the documentation for AVPOPS, and Im a little confused in this
section:
----------------------------------------------------------------------------
-----
#avp_db_load(source,name)
#Loads from DB into memory the AVPs corresponding to the given source.
Meaning of the parameters is as follows:
source - what info is used for identifying the AVPs. Parameter syntax:
source = (sip_uri)['/'('username'|'domain')]) | (avp_alias) |
str_value
sip_uri = '$from' | '$to' | '$ruri'
name - which AVPs will be loaded from DB into memory. Parameter syntax is:
name = avp_spec['/'(table_name|'$'db_scheme)]
avp_spec = ''|'s:'|'i:'|avp_name|avp_alias
Example 1-12. avp_db_load usage
....
avp_db_load("$from","i:678");
avp_db_load("$ruri/domain","i:/domain_preferences");
avp_db_load("$uuid","s:404fwd/fwd_table");
avp_db_load("$ruri","i:123/$some_scheme");
....
----------------------------------------------------------------------------
-----
My question are:
Can someone explain the source syntax?
Can someone explain the name syntax?
what are i:, s:, avp_name and avp_alias?
Thanks!
Lenir
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_____________________________________________________________________
Mensaje analizado y protegido, tecnologia antivirus www.trendmicro.es
26 Oct
26 Oct
7:19 p.m.
On 10/19/05 22:27, Pol wrote:
Hi SerUsers!
I'm completly crazy tryin' to do the following:
I just want to load from DB user alias and rewrite it into "$to
If you want to change the To header it is not possible with avpops in
the manner you want.
$ruri", because these calls shoud go directly to
asterisk voicemail
and they are numerical not alphanumeric.
i tried to do the following:
if(avp_db_load($alias/$username,i:alias")
avp_pushto("$ruri/$to","alias")
First you should know for what user you want to load the alias - the one
from R-URI? Do you have to use aliases table or you can create and use
other table? If you stick to aliases table then look at db_scheme:
http://www.voice-system.ro/docs/avpops/ar01s05.html#db_scheme
For ser, the avpops tutorial you can find at:
http://www.voice-system.ro/docs/avpops/0.9.0/
Daniel
just to load from alias table username into an integer
called alias
and then pushed to new $ruri.
I'm new in ser and avps module it's really usefull but a little bit
"unreadable", plz this should work for tomorrow :$ any help plz!?
be as much especific as can, because i don't know if i have done the
proper modparams.
these are:
modparam("avpops", "avp_url",
"mysql://ser:heslo@localhost/ser")
modparam("avpops", "avp_table", "usr_preferences")
#modparam("avpops", "use_domain", "1")
modparam("avpops", "uuid_column", "uuid")
modparam("avpops", "username_column", "username")
modparam("avpops", "domain_column", "domain")
modparam("avpops", "attribute_column", "attribute")
modparam("avpops", "value_column", "value")
modparam("avpops", "type_column", "type")
THX
On 10/13/05, Iqbal <iqbal(a)gigo.co.uk> wrote:
Hi
I think you have the source syntax written below in the avp_db_load
statements
so the source will have $from or $to or $ruri optionally followed by the
words "username" or domain
eg
avp_db_load($from/username) of avp_db_load($to/domain) ---note these are
not completed syntax
OR instead of the sip_uri which is $from,$to,$ruri you can have avp_alias
which is exactly what it says, its an alias,
Str_value this is the number directly related to the predefined alias in
the line above
The name can be a string S:
interger i:
or you can leave out the S: and just use the name
or of course an alias
I know thats probably not clear...in fact I just read it myself, the best
thing with avpops , is to look at the db, and create a few, and then see
how to pop them out and play with 'em
Iqbal
On 10/12/2005, "Lenir" <lenirsantiago(a)yahoo.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hello list,
I'm reading the documentation for AVPOPS, and Im a little confused in this
section:
----------------------------------------------------------------------------
-----
#avp_db_load(source,name)
#Loads from DB into memory the AVPs corresponding to the given source.
Meaning of the parameters is as follows:
source - what info is used for identifying the AVPs. Parameter syntax:
source = (sip_uri)['/'('username'|'domain')]) | (avp_alias) |
str_value
sip_uri = '$from' | '$to' | '$ruri'
name - which AVPs will be loaded from DB into memory. Parameter syntax is:
name = avp_spec['/'(table_name|'$'db_scheme)]
avp_spec = ''|'s:'|'i:'|avp_name|avp_alias
Example 1-12. avp_db_load usage
....
avp_db_load("$from","i:678");
avp_db_load("$ruri/domain","i:/domain_preferences");
avp_db_load("$uuid","s:404fwd/fwd_table");
avp_db_load("$ruri","i:123/$some_scheme");
....
----------------------------------------------------------------------------
-----
My question are:
Can someone explain the source syntax?
Can someone explain the name syntax?
what are i:, s:, avp_name and avp_alias?
Thanks!
Lenir
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_____________________________________________________________________
Mensaje analizado y protegido, tecnologia antivirus www.trendmicro.es
6967
days inactive
6981
days old
3 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
Iqbal -
Lenir -
Pol