22 Dec
2020
22 Dec
'20
8:58 a.m.
Any updates on this?
On Tue, Dec 15, 2020 at 8:13 PM Syed Shahryar <syedshahryar(a)gmail.com>
wrote:
I am new to Kamailio so may be doing something wrong.
I looked at
https://www.kamailio.org/wiki/cookbooks/5.4.x/core.
I tried the following combinations but getting errors in all cases:
#!subst "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdef "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdefs "/EVAPI_PORT/$env(EVAPI_PORT)/"
*Errors:*
0(6) ERROR: <core> [core/pvapi.c:924]: pv_parse_spec2(): error searching
pvar "env"
0(6) ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char
[E/69] in [$env(EVAPI_PORT)/] at [5 (5)]
0(6) ERROR: <core> [core/re.c:170]: parse_repl(): bad specifier in
replace part /$env(EVAPI_PORT)/
0(6) ERROR: <core> [core/ppcfg.c:69]: pp_subst_add(): bad subst
expression: /EVAPI_PORT/$env(EVAPI_PORT)/
At a later step, I would like to do:
#!define EVAPI_LISTEN "0.0.0.0:EVAPI_PORT"
And use EVAP_LISTEN in mod_param for the evapi module.
And something similar to above for TLS settings.
On Tue, Dec 15, 2020 at 12:41 PM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
--
--
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
Hello,
as written on the tracker, look at using #!subst or #!substdef (see core
cookbook), they should be able to get the substitution value from
environment using $env(NAME).
The master branch introduced #!defenv as a (simpler) alternative.
Cheers,
Daniel
On 12.12.20 05:33, Syed Shahryar wrote:
I tried many combinations of the following but I keep getting syntax
errors:
listen=tls:TLS_IP:$env(TLS_PORT) advertise PUBLIC_IP:$env(TLS_PORT)
TLS_IP and PUBLIC_IP are constants defined at the top using #!define.
And, TLS_PORT is supposed to be the env variable.
--
--
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
--
--
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
22 Dec
22 Dec
11:59 a.m.
New subject: How to use port number using $env in listen
You have to put the the #!subst and listen after loading pv module.
Probably env and def variable should be relocated to core, not having
SIP/runtime dependency, to facilitate their use during start up.
Cheers,
Daniel
On 22.12.20 06:58, Syed Shahryar wrote:
Any updates on this?
On Tue, Dec 15, 2020 at 8:13 PM Syed Shahryar <syedshahryar(a)gmail.com
<mailto:syedshahryar@gmail.com>> wrote:
I am new to Kamailio so may be doing something wrong. I looked
at https://www.kamailio.org/wiki/cookbooks/5.4.x/core
<https://www.kamailio.org/wiki/cookbooks/5.4.x/core>.
I tried the following combinations but getting errors in all cases:
#!subst "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdef "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdefs "/EVAPI_PORT/$env(EVAPI_PORT)/"
*Errors:*
0(6) ERROR: <core> [core/pvapi.c:924]: pv_parse_spec2(): error
searching pvar "env"
0(6) ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong
char [E/69] in [$env(EVAPI_PORT)/] at [5 (5)]
0(6) ERROR: <core> [core/re.c:170]: parse_repl(): bad specifier
in replace part /$env(EVAPI_PORT)/
0(6) ERROR: <core> [core/ppcfg.c:69]: pp_subst_add(): bad subst
expression: /EVAPI_PORT/$env(EVAPI_PORT)/
At a later step, I would like to do:
#!define EVAPI_LISTEN "0.0.0.0:EVAPI_PORT"
And use EVAP_LISTEN in mod_param for the evapi module.
And something similar to above for TLS settings.
On Tue, Dec 15, 2020 at 12:41 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
as written on the tracker, look at using #!subst or #!substdef
(see core cookbook), they should be able to get the
substitution value from environment using $env(NAME).
The master branch introduced #!defenv as a (simpler) alternative.
Cheers,
Daniel
On 12.12.20 05:33, Syed Shahryar wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
I tried many combinations of the
following but I keep getting
syntax errors:
listen=tls:TLS_IP:$env(TLS_PORT) advertise
PUBLIC_IP:$env(TLS_PORT)
TLS_IP and PUBLIC_IP are constants defined at the top using
#!define. And, TLS_PORT is supposed to be the env variable.
--
--
This message contains confidential information and is
intended only for the individual named. If you are not the
named addressee, you should not disseminate, distribute or
copy this email. Please notify the sender immediately by
email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be
guaranteed to be secure or error-free, as information could
be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses. The sender, therefore, does
not accept liability for any errors or omissions in the
contents of this message which arise as a result of email
transmission. If verification is required, please request a
hard-copy version.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla <https://www.paypal.me/dcmierla>
--
--
This message contains confidential information and is intended
only for the individual named. If you are not the named addressee,
you should not disseminate, distribute or copy this email. Please
notify the sender immediately by email if you have received this
email by mistake and delete this email from your system. Email
transmission cannot be guaranteed to be secure or error-free, as
information could be intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions
in the contents of this message which arise as a result of email
transmission. If verification is required, please request a
hard-copy version.
--
--
This message contains confidential information and is intended only
for the individual named. If you are not the named addressee, you
should not disseminate, distribute or copy this email. Please notify
the sender immediately by email if you have received this email by
mistake and delete this email from your system. Email transmission
cannot be guaranteed to be secure or error-free, as information could
be intercepted, corrupted, lost, destroyed, arrive late or incomplete,
or contain viruses. The sender, therefore, does not accept liability
for any errors or omissions in the contents of this message which
arise as a result of email transmission. If verification is required,
please request a hard-copy version.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:07 p.m.
New subject: How to use port number using $env in listen
I ran different combinations of the following simple configuration file but
still getting errors on 'listen':
#!KAMAILIO
loadmodule "pv.so"
#!define TLS_IP "0.0.0.0"
// #!define TLS_PORT $env(TLS_PORT)
//#!substdefs "/TLS_PORT/$env(TLS_PORT)/"
#!defenv TLS_PORT=TLS_PORT
#listen=udp:TLS_IP:TLS_PORT name "UDP_SOCKET"
listen=udp:TLS_IP:$env(TLS_PORT) name "UDP_SOCKET"
//// ERROR Lines ////
kamailio | 0(6) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at():
parse error in config file /usr/local/etc/kamailio/kamailio.test.cfg, line
11, column 19-26: syntax error
kamailio | 0(6) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at():
parse error in config file /usr/local/etc/kamailio/kamailio.test.cfg, line
11, column 19-26: ip address, interface name or hostname expected
kamailio | 0(6) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at():
parse error in config file /usr/local/etc/kamailio/kamailio.test.cfg, line
11, column 28-31:
kamailio | ERROR: bad config file (3 errors)
> Probably env and def variable should be relocated
to core, not having
SIP/runtime dependency, to facilitate their use during start
up.
Good idea!
On Tue, Dec 22, 2020 at 3:59 AM Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
You have to put the the #!subst and listen after
loading pv module.
Probably env and def variable should be relocated to core, not having
SIP/runtime dependency, to facilitate their use during start up.
Cheers,
Daniel
On 22.12.20 06:58, Syed Shahryar wrote:
Any updates on this?
On Tue, Dec 15, 2020 at 8:13 PM Syed Shahryar <syedshahryar(a)gmail.com>
wrote:
--
--
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
I am new to Kamailio so may be doing something
wrong. I looked at
https://www.kamailio.org/wiki/cookbooks/5.4.x/core.
I tried the following combinations but getting errors in all cases:
#!subst "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdef "/EVAPI_PORT/$env(EVAPI_PORT)/"
#!substdefs "/EVAPI_PORT/$env(EVAPI_PORT)/"
*Errors:*
0(6) ERROR: <core> [core/pvapi.c:924]: pv_parse_spec2(): error searching
pvar "env"
0(6) ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char
[E/69] in [$env(EVAPI_PORT)/] at [5 (5)]
0(6) ERROR: <core> [core/re.c:170]: parse_repl(): bad specifier in
replace part /$env(EVAPI_PORT)/
0(6) ERROR: <core> [core/ppcfg.c:69]: pp_subst_add(): bad subst
expression: /EVAPI_PORT/$env(EVAPI_PORT)/
At a later step, I would like to do:
#!define EVAPI_LISTEN "0.0.0.0:EVAPI_PORT"
And use EVAP_LISTEN in mod_param for the evapi module.
And something similar to above for TLS settings.
On Tue, Dec 15, 2020 at 12:41 PM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
--
--
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
Hello,
as written on the tracker, look at using #!subst or #!substdef (see core
cookbook), they should be able to get the substitution value from
environment using $env(NAME).
The master branch introduced #!defenv as a (simpler) alternative.
Cheers,
Daniel
On 12.12.20 05:33, Syed Shahryar wrote:
I tried many combinations of the following but I keep getting syntax
errors:
listen=tls:TLS_IP:$env(TLS_PORT) advertise PUBLIC_IP:$env(TLS_PORT)
TLS_IP and PUBLIC_IP are constants defined at the top using #!define.
And, TLS_PORT is supposed to be the env variable.
--
--
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
--
--
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee, you should not
disseminate, distribute or copy this email. Please notify the sender
immediately by email if you have received this email by mistake and delete
this email from your system. Email transmission cannot be guaranteed to be
secure or error-free, as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender,
therefore, does not accept liability for any errors or omissions in the
contents of this message which arise as a result of email transmission. If
verification is required, please request a hard-copy version.
1431
days inactive
1431
days old
2 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Syed Shahryar