28 May
2009
28 May
'09
9:01 p.m.
Hi, Guys...
I use a 'switch' block to drive decisions after a failed 'lookup' (on
router-block). In theory all Ok, but....
In the body of this switch, if I use a 'break' inside an 'if' it gives
me error, saying that it's not allowed.
See below the code.
What am I doing wrong?
Edson.
========================================================
route[1] {
if (!lookup("location") {
switch ($retcode) {
case -1:
case -3:
if ('situation A') {
t_on_failure("1");
break;
} else {
if ('condition b') {
if ('condition b.1') {
t_on_failure("2");
break;
};
};
};
exit;
case -2:
sl_send_reply("500", "Internal lookup error");
exit;
}
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
28 May
28 May
9:08 p.m.
Hello,
are you using latest sr from git of http://sip-router.org?
I just tested something similar and it starts.
Cheers,
Daniel
On 05/28/2009 09:01 PM, Edson - Lists wrote:
Hi, Guys...
I use a 'switch' block to drive decisions after a failed 'lookup' (on
router-block). In theory all Ok, but....
In the body of this switch, if I use a 'break' inside an 'if' it gives
me error, saying that it's not allowed.
See below the code.
What am I doing wrong?
Edson.
========================================================
route[1] {
if (!lookup("location") {
switch ($retcode) {
case -1:
case -3:
if ('situation A') {
t_on_failure("1");
break;
} else {
if ('condition b') {
if ('condition b.1') {
t_on_failure("2");
break;
};
};
};
exit;
case -2:
sl_send_reply("500", "Internal lookup error");
exit;
}
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
_______________________________________________
sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com/
9:32 p.m.
Sorry... I forgot to mention that:
Kamailio 1.5.1-notls SVN 2:5858
Just retested on the real script and it gives me "syntax error" on each
line that had the break statement...
Edson.
Daniel-Constantin Mierla escreveu:
Hello,
are you using latest sr from git of http://sip-router.org?
I just tested something similar and it starts.
Cheers,
Daniel
On 05/28/2009 09:01 PM, Edson - Lists wrote:
Hi, Guys...
I use a 'switch' block to drive decisions after a failed 'lookup' (on
router-block). In theory all Ok, but....
In the body of this switch, if I use a 'break' inside an 'if' it gives
me error, saying that it's not allowed.
See below the code.
What am I doing wrong?
Edson.
========================================================
route[1] {
if (!lookup("location") {
switch ($retcode) {
case -1:
case -3:
if ('situation A') {
t_on_failure("1");
break;
} else {
if ('condition b') {
if ('condition b.1') {
t_on_failure("2");
break;
};
};
};
exit;
case -2:
sl_send_reply("500", "Internal lookup error");
exit;
}
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
_______________________________________________
sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
9:54 p.m.
On 05/28/2009 09:32 PM, Edson - Lists wrote:
Sorry... I forgot to mention that:
Kamailio 1.5.1-notls SVN 2:5858
then you missed the right mailing list, for
kamailio stable versions
users(a)lists.kamailio.org is still available.
Only devel lists of kamailio and ser have been combined with sr-dev, as
development happens in the same place - sip-router.org project.
Just retested on the real script and it gives me "syntax error" on
each line that had the break statement...
kamailio 1.5 does not support inside 'break', only at the end of case list:
switch($rc)
{
case 1:
...
break;
case 2:
break:
}
Next version that is based on sip-router will get rid of this
limitation. You can try it:
http://sip-router.org/wiki/migration/kamailio-3.0-config
Cheers,
Daniel
Edson.
Daniel-Constantin Mierla escreveu:
> Hello,
>
> are you using latest sr from git of http://sip-router.org?
>
> I just tested something similar and it starts.
>
> Cheers,
> Daniel
>
>
> On 05/28/2009 09:01 PM, Edson - Lists wrote:
>> Hi, Guys...
>>
>> I use a 'switch' block to drive decisions after a failed 'lookup'
>> (on router-block). In theory all Ok, but....
>>
>> In the body of this switch, if I use a 'break' inside an 'if' it
>> gives me error, saying that it's not allowed.
>>
>> See below the code.
>>
>> What am I doing wrong?
>>
>> Edson.
>>
>> ========================================================
>> route[1] {
>> if (!lookup("location") {
>> switch ($retcode) {
>> case -1:
>> case -3:
>> if ('situation A') {
>> t_on_failure("1");
>> break;
>> } else {
>> if ('condition b') {
>> if ('condition b.1') {
>> t_on_failure("2");
>> break;
>> };
>> };
>> };
>> exit;
>> case -2:
>> sl_send_reply("500", "Internal lookup error");
>> exit;
>> }
>> }
>> if (!t_relay()) {
>> sl_reply_error();
>> }
>> exit;
>> }
>>
>> _______________________________________________
>> sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
--
Daniel-Constantin Mierla
http://www.asipto.com/
10:26 p.m.
Ok, Daniel...
Thanks for the quick return... I'll try to start migration (at lab, for
sure) and see if everything works as expected... ;)
Edson.
Daniel-Constantin Mierla escreveu:
On 05/28/2009 09:32 PM, Edson - Lists wrote:
Sorry... I forgot to mention that:
Kamailio 1.5.1-notls SVN 2:5858
then you missed the right mailing list, for
kamailio stable versions
users(a)lists.kamailio.org is still available.
Only devel lists of kamailio and ser have been combined with sr-dev, as
development happens in the same place - sip-router.org project.
Just retested on the real script and it gives me "syntax error" on
each line that had the break statement...
kamailio 1.5 does not support inside 'break', only at the end of case list:
switch($rc)
{
case 1:
...
break;
case 2:
break:
}
Next version that is based on sip-router will get rid of this
limitation. You can try it:
http://sip-router.org/wiki/migration/kamailio-3.0-config
Cheers,
Daniel
Edson.
Daniel-Constantin Mierla escreveu:
> Hello,
>
> are you using latest sr from git of http://sip-router.org?
>
> I just tested something similar and it starts.
>
> Cheers,
> Daniel
>
>
> On 05/28/2009 09:01 PM, Edson - Lists wrote:
>> Hi, Guys...
>>
>> I use a 'switch' block to drive decisions after a failed 'lookup'
>> (on router-block). In theory all Ok, but....
>>
>> In the body of this switch, if I use a 'break' inside an 'if' it
>> gives me error, saying that it's not allowed.
>>
>> See below the code.
>>
>> What am I doing wrong?
>>
>> Edson.
>>
>> ========================================================
>> route[1] {
>> if (!lookup("location") {
>> switch ($retcode) {
>> case -1:
>> case -3:
>> if ('situation A') {
>> t_on_failure("1");
>> break;
>> } else {
>> if ('condition b') {
>> if ('condition b.1') {
>> t_on_failure("2");
>> break;
>> };
>> };
>> };
>> exit;
>> case -2:
>> sl_send_reply("500", "Internal lookup error");
>> exit;
>> }
>> }
>> if (!t_relay()) {
>> sl_reply_error();
>> }
>> exit;
>> }
>>
>> _______________________________________________
>> sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
5660
days inactive
5660
days old
4 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Edson - Lists