4 Jan
2017
4 Jan
'17
9:37 p.m.
Dear All,
I'm wondering is it possible to catch Diameter Messages and their AVP
values from kamailio.cfg just like for SIP messages? (Using pseudo
variables)
I looked into this function from the attached S-CSCF example.
route[REG_MAR_REPLY]
{
#this is async so to know status we have to check the reply avp
xlog("L_DBG","maa_return code is *$avp(s:maa_return_code)*\n");
Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the rc)
What I mainly looking for is the EXPERIMENTAL_RESULT (experimental_rc) and
some different AVP values besides.
Thank you very much in advance!
*Cheers,*
*Zoltan*
6 Jan
6 Jan
8:47 p.m.
Hi,
Is somebody ever tried to manipulate and retrieve AVP variables from the
Sent/Received Diameter Messages via Config file?
Thank you very much in advance!
*Cheers,*
*Zoltan*
On 4 January 2017 at 20:37, Zoltán Miricz <zoltan.miricz(a)gmail.com> wrote:
Dear All,
I'm wondering is it possible to catch Diameter Messages and their AVP
values from kamailio.cfg just like for SIP messages? (Using pseudo
variables)
I looked into this function from the attached S-CSCF example.
route[REG_MAR_REPLY]
{
#this is async so to know status we have to check the reply avp
xlog("L_DBG","maa_return code is *$avp(s:maa_return_code)*\n");
Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the rc)
What I mainly looking for is the EXPERIMENTAL_RESULT (experimental_rc) and
some different AVP values besides.
Thank you very much in advance!
*Cheers,*
*Zoltan*
9 Jan
9 Jan
10:50 a.m.
Hi Zoltan,
i've added something like this for the IMS-Charging Module in order to
retrieve the "full" Charging Response:
case -1: #failure
xlog("L_ERR", "CCR failure - error response sent from
module\n");
switch ($avp(s:cca_result_code)){
case 5030:
send_reply("403", "Charging User not found");
break;
case 5031:
send_reply("403", "Rating failed");
break;
case 4010:
send_reply("402", "Payment required - Unsufficient funds");
break;
case 5006:
send_reply("486", "Line limit exceeded");
break;
default:
send_reply("402","Payment required ($avp(s:cca_result_code))");
break;
}
(it's in the Master repo/example:
https://github.com/kamailio/kamailio/blob/master/misc/examples/scscf/kamail…)
In addition, I have a generic Diameter Client/Server Module, which
unfortunately was not finished for Kamailio 5 (development branch is
frozen at the moment), but in that case, you'll have to do all the
processing yourself. We currently use it as a "Diameter Adapter",
which takes a Diameter Request and forwards it through a message bus
to worker processes (acting as a HSS).
Thanks,
Carsten
2017-01-06 18:47 GMT+01:00 Zoltán Miricz <zoltan.miricz(a)gmail.com>om>:
Hi,
Is somebody ever tried to manipulate and retrieve AVP variables from the
Sent/Received Diameter Messages via Config file?
Thank you very much in advance!
Cheers,
Zoltan
On 4 January 2017 at 20:37, Zoltán Miricz <zoltan.miricz(a)gmail.com> wrote:
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
Dear All,
I'm wondering is it possible to catch Diameter Messages and their AVP
values from kamailio.cfg just like for SIP messages? (Using pseudo
variables)
I looked into this function from the attached S-CSCF example.
route[REG_MAR_REPLY]
{
#this is async so to know status we have to check the reply avp
xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n");
Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the rc)
What I mainly looking for is the EXPERIMENTAL_RESULT (experimental_rc) and
some different AVP values besides.
Thank you very much in advance!
Cheers,
Zoltan
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11:26 p.m.
Hi Carsten,
Thank you very much for your response!
Sadly for the UAR, LIR, SAR are not providing these kind of error codes.
As you can see only -1 coming back and not
Jan 4 06:17:15 localhost journal:
de.fhg.fokus.hss.cx.CxExperimentalResultException:
IMS_Diameter_Error_User_Unknown
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.cx.op.UAR.processRequest(UAR.java:115)
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.main.Task.execute(Task.java:169)
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.main.Worker.run(Worker.java:66)
Jan 4 06:17:15 localhost journal: #033[0;39;49m#033[0;31;49m 7(46) ERROR:
ims_icscf [cxdx_uar.c:152]: async_cdp_uar_callback():
RC_IMS_DIAMETER_ERROR_USER_UNKNOWN
Jan 4 06:17:15 localhost journal: #033[0;39;49m#033[0;31;49m 7(46) ERROR:
<script>: $avp(s:uaa_return_code) = -1
route[REG_UAR_REPLY]
{
xlog("$$avp(s:uaa_return_code) = $avp(s:uaa_return_code)\n");
#this is async so to know status we have to check the reply avp
switch ($avp(s:uaa_return_code)){
case 1: #success
if (I_scscf_select("0")){
In my case it should be Error_User_Unknown(5001) and from the above example
it's visible that from the cxdx_uar.c it's visible, but when the config
script get's the variable it's already -1.
*Cheers,*
*Zoltan*
On 9 January 2017 at 09:50, Carsten Bock <carsten(a)ng-voice.com> wrote:
Hi Zoltan,
i've added something like this for the IMS-Charging Module in order to
retrieve the "full" Charging Response:
case -1: #failure
xlog("L_ERR", "CCR failure - error response sent from
module\n");
switch ($avp(s:cca_result_code)){
case 5030:
send_reply("403", "Charging User not found");
break;
case 5031:
send_reply("403", "Rating failed");
break;
case 4010:
send_reply("402", "Payment required - Unsufficient funds");
break;
case 5006:
send_reply("486", "Line limit exceeded");
break;
default:
send_reply("402","Payment required ($avp(s:cca_result_code))");
break;
}
(it's in the Master repo/example:
https://github.com/kamailio/kamailio/blob/master/misc/
examples/scscf/kamailio.cfg)
In addition, I have a generic Diameter Client/Server Module, which
unfortunately was not finished for Kamailio 5 (development branch is
frozen at the moment), but in that case, you'll have to do all the
processing yourself. We currently use it as a "Diameter Adapter",
which takes a Diameter Request and forwards it through a message bus
to worker processes (acting as a HSS).
Thanks,
Carsten
2017-01-06 18:47 GMT+01:00 Zoltán Miricz <zoltan.miricz(a)gmail.com>om>:
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
Is somebody ever tried to manipulate and retrieve AVP variables from the
Sent/Received Diameter Messages via Config file?
Thank you very much in advance!
Cheers,
Zoltan
On 4 January 2017 at 20:37, Zoltán Miricz <zoltan.miricz(a)gmail.com>
wrote:
>
>
> Dear All,
>
> I'm wondering is it possible to catch Diameter Messages and their AVP
> values from kamailio.cfg just like for SIP messages? (Using pseudo
> variables)
>
> I looked into this function from the attached S-CSCF example.
>
> route[REG_MAR_REPLY]
> {
>
> #this is async so to know status we have to check the reply avp
>
> xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n");
>
> Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the
rc)
> What I mainly looking for is the
EXPERIMENTAL_RESULT (experimental_rc)
and
some
different AVP values besides.
Thank you very much in advance!
Cheers,
Zoltan
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
10 Jan
10 Jan
7:04 p.m.
Hi Zoltan,
that's not a bug, it's a feature request. The value is not available,
since you're the first one asking for it.
Can you put a Feature-Request on our Tracker
(https://github.com/kamailio/kamailio/issues)? We added it to the
ims_charging module, because we explicitly needed this feature, so we
implemented it.
Thanks,
Carsten
2017-01-09 21:26 GMT+01:00 Zoltán Miricz <zoltan.miricz(a)gmail.com>om>:
Hi Carsten,
Thank you very much for your response!
Sadly for the UAR, LIR, SAR are not providing these kind of error codes.
As you can see only -1 coming back and not
Jan 4 06:17:15 localhost journal:
de.fhg.fokus.hss.cx.CxExperimentalResultException:
IMS_Diameter_Error_User_Unknown
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.cx.op.UAR.processRequest(UAR.java:115)
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.main.Task.execute(Task.java:169)
Jan 4 06:17:15 localhost journal: #011at
de.fhg.fokus.hss.main.Worker.run(Worker.java:66)
Jan 4 06:17:15 localhost journal: #033[0;39;49m#033[0;31;49m 7(46) ERROR:
ims_icscf [cxdx_uar.c:152]: async_cdp_uar_callback():
RC_IMS_DIAMETER_ERROR_USER_UNKNOWN
Jan 4 06:17:15 localhost journal: #033[0;39;49m#033[0;31;49m 7(46) ERROR:
<script>: $avp(s:uaa_return_code) = -1
route[REG_UAR_REPLY]
{
xlog("$$avp(s:uaa_return_code) = $avp(s:uaa_return_code)\n");
#this is async so to know status we have to check the reply avp
switch ($avp(s:uaa_return_code)){
case 1: #success
if (I_scscf_select("0")){
In my case it should be Error_User_Unknown(5001) and from the above example
it's visible that from the cxdx_uar.c it's visible, but when the config
script get's the variable it's already -1.
Cheers,
Zoltan
On 9 January 2017 at 09:50, Carsten Bock <carsten(a)ng-voice.com> wrote:
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
Hi Zoltan,
i've added something like this for the IMS-Charging Module in order to
retrieve the "full" Charging Response:
case -1: #failure
xlog("L_ERR", "CCR failure - error response sent from
module\n");
switch ($avp(s:cca_result_code)){
case 5030:
send_reply("403", "Charging User not found");
break;
case 5031:
send_reply("403", "Rating failed");
break;
case 4010:
send_reply("402", "Payment required - Unsufficient funds");
break;
case 5006:
send_reply("486", "Line limit exceeded");
break;
default:
send_reply("402","Payment required ($avp(s:cca_result_code))");
break;
}
(it's in the Master repo/example:
https://github.com/kamailio/kamailio/blob/master/misc/examples/scscf/kamail…)
In addition, I have a generic Diameter Client/Server Module, which
unfortunately was not finished for Kamailio 5 (development branch is
frozen at the moment), but in that case, you'll have to do all the
processing yourself. We currently use it as a "Diameter Adapter",
which takes a Diameter Request and forwards it through a message bus
to worker processes (acting as a HSS).
Thanks,
Carsten
2017-01-06 18:47 GMT+01:00 Zoltán Miricz <zoltan.miricz(a)gmail.com>om>:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
Is somebody ever tried to manipulate and retrieve AVP variables from the
Sent/Received Diameter Messages via Config file?
Thank you very much in advance!
Cheers,
Zoltan
On 4 January 2017 at 20:37, Zoltán Miricz <zoltan.miricz(a)gmail.com>
wrote:
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Dear All,
I'm wondering is it possible to catch Diameter Messages and their AVP
values from kamailio.cfg just like for SIP messages? (Using pseudo
variables)
I looked into this function from the attached S-CSCF example.
route[REG_MAR_REPLY]
{
#this is async so to know status we have to check the reply avp
xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n");
Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the
rc)
What I mainly looking for is the EXPERIMENTAL_RESULT (experimental_rc)
and
some different AVP values besides.
Thank you very much in advance!
Cheers,
Zoltan
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
7:58 p.m.
Thank you very much.
I opened a feature request:
https://github.com/kamailio/kamailio/issues/922
If I will have time, I might try to implement such kind of functionality :)
*Cheers,*
*Zoltan*
On 9 January 2017 at 09:50, Carsten Bock <carsten(a)ng-voice.com> wrote:
Hi Zoltan,
i've added something like this for the IMS-Charging Module in order to
retrieve the "full" Charging Response:
case -1: #failure
xlog("L_ERR", "CCR failure - error response sent from
module\n");
switch ($avp(s:cca_result_code)){
case 5030:
send_reply("403", "Charging User not found");
break;
case 5031:
send_reply("403", "Rating failed");
break;
case 4010:
send_reply("402", "Payment required - Unsufficient funds");
break;
case 5006:
send_reply("486", "Line limit exceeded");
break;
default:
send_reply("402","Payment required ($avp(s:cca_result_code))");
break;
}
(it's in the Master repo/example:
https://github.com/kamailio/kamailio/blob/master/misc/
examples/scscf/kamailio.cfg)
In addition, I have a generic Diameter Client/Server Module, which
unfortunately was not finished for Kamailio 5 (development branch is
frozen at the moment), but in that case, you'll have to do all the
processing yourself. We currently use it as a "Diameter Adapter",
which takes a Diameter Request and forwards it through a message bus
to worker processes (acting as a HSS).
Thanks,
Carsten
2017-01-06 18:47 GMT+01:00 Zoltán Miricz <zoltan.miricz(a)gmail.com>om>:
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
Is somebody ever tried to manipulate and retrieve AVP variables from the
Sent/Received Diameter Messages via Config file?
Thank you very much in advance!
Cheers,
Zoltan
On 4 January 2017 at 20:37, Zoltán Miricz <zoltan.miricz(a)gmail.com>
wrote:
>
>
> Dear All,
>
> I'm wondering is it possible to catch Diameter Messages and their AVP
> values from kamailio.cfg just like for SIP messages? (Using pseudo
> variables)
>
> I looked into this function from the attached S-CSCF example.
>
> route[REG_MAR_REPLY]
> {
>
> #this is async so to know status we have to check the reply avp
>
> xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n");
>
> Sadly it gives back only 1, -1, -2. (which is based on cxdx_mar.c the
rc)
> What I mainly looking for is the
EXPERIMENTAL_RESULT (experimental_rc)
and
some
different AVP values besides.
Thank you very much in advance!
Cheers,
Zoltan
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
2877
days inactive
2883
days old
5 comments
2 participants
participants (2)
-
Carsten Bock -
Zoltán Miricz