The default config script authenticates REGISTER messages only.

Jan.

On 23-11 14:24, Igor Borisovsky wrote:

Hi.

...

If you are using the default config, look for the comments:

# Uncomment this if you want digest authentication

Do as they say.

I've already uncommented this lines. My config file is: # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"domain.com") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("domain.com", "subscriber")) { www_challenge("domain.com", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

Besides, I tried to use proxy_authorize instead of www_authorize. I didn't help. By the way, i used the following sip-clients:

1. sj-phone(http://www.sjlabs.com/);
2. sipps(http://www.nero.com)

----- Original Message ----- From: "Andrei Pelinescu-Onciul" pelinescu-onciul@fokus.fraunhofer.de To: "Igor Borisovsky" igor@datanaut.com Cc: serusers@lists.iptel.org Sent: Saturday, November 22, 2003 4:52 PM Subject: Re: [Serusers] Urgent help: ser & digest authorization!

...

On Nov 22, 2003 at 15:48, Igor Borisovsky igor@datanaut.com wrote:

...

Hi. I've installed ser 0.8.11, mysql 4.0. Then i did everything according to Dan's howto. So ser+mysql bundle working well. I created some users

using

...

...

serctl utility. The my goal is the digest authorization via ser. Does

anyone

...

...

know how can i enable this feature? Thanks.

If you are using the default config, look for the comments:

# Uncomment this if you want digest authentication

Do as they say.

Andrei

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers