5 Mar
2013
5 Mar
'13
9:46 a.m.
Hello,
I'm looking for assistance in RLS module setup for kamailio 3.3.2
The problem is that I need to handle resource-list updates on my kamalio server.
For testing purposes I use Jitsi client.
Expected:
1) When a new contact is added to Jitsi or an old one is removed, Jitsi sends updated
resource-list XML to caps.
- This works fine, I can see PUT request in Wireshark and I can see following log from
kamailio.cfg:
xlog("===== xhttp put: refreshing resource-list for $var(uri)\n");
rls_update_subs("$var(uri)",
"presence");
which hopefully means that rls_update_subs function has been called.
2) After this function was called, I expect SUBSCRIBE messages in backend, not in Jitsi,
but I still see Jitsi sending SUBSCRIBE for each contact.
What am I doing wrong? Any help would be useful!
Regards,
Alex.
6 Mar
6 Mar
2:53 a.m.
AFAIK after 1) Jitsi should send subscribe message to xcap defined list.
After this kamailio can send individual subscribe packets in backend.
But as you described - Jitsi does not send this magic subscribe. Problem
application is Jitsi - not kamailio.
I spend couple of weeks diving into xcap/rls stuff and had the same problem
with the jitsi.
Finally i end up with own softphone code (based on resiprocate) - it works
ok. I'd suggest you to try with bria or blink softphones - maybe they will
perform better.
If anyone got rls working with jitsi - please share your experience...
On Tue, Mar 5, 2013 at 4:46 PM, Aleksandrs Semenenko <asemenenko(a)ftctele.com
wrote:
Hello,
I'm looking for assistance in RLS module setup for kamailio 3.3.2
The problem is that I need to handle resource-list updates on my kamalio
server.
For testing purposes I use Jitsi client.
Expected:
1) When a new contact is added to Jitsi or an old one is removed, Jitsi
sends updated resource-list XML to caps.
- This works fine, I can see PUT request in Wireshark and I can see
following log from kamailio.cfg:
xlog("===== xhttp put: refreshing resource-list for $var(uri)\n");
rls_update_subs("$var(uri)",
"presence");
which hopefully means that rls_update_subs function has been called.
2) After this function was called, I expect SUBSCRIBE messages in backend,
not in Jitsi, but I still see Jitsi sending SUBSCRIBE for each contact.
What am I doing wrong? Any help would be useful!
Regards,
Alex.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4:29 a.m.
Jitsi does not currently support RLS so this will not work at all.
The only open-source SIP client I know of with RLS support is Blink (for
Mac only at the moment).
Blink won't work with Kamailio at the moment either. This is because
there is a huge problem with the SIP SIMPLE specifications in that they
don't define enough for people to be able to create inter-operable
implementations with just the information in the specifications. I plan
to make Kamailio work with Blink presence in the future but I need a
non-Mac (preferably Linux) implementation that supports this first (and
then I need the time to actually do it).
Regards,
Peter
On 06/03/13 07:53, Dmytro Bogovych wrote:
AFAIK after 1) Jitsi should send subscribe message to
xcap defined
list. After this kamailio can send individual subscribe packets in
backend.
But as you described - Jitsi does not send this magic subscribe.
Problem application is Jitsi - not kamailio.
I spend couple of weeks diving into xcap/rls stuff and had the same
problem with the jitsi.
Finally i end up with own softphone code (based on resiprocate) - it
works ok. I'd suggest you to try with bria or blink softphones - maybe
they will perform better.
If anyone got rls working with jitsi - please share your experience...
On Tue, Mar 5, 2013 at 4:46 PM, Aleksandrs Semenenko
<asemenenko(a)ftctele.com <mailto:asemenenko@ftctele.com>> wrote:
Hello,
I'm looking for assistance in RLS module setup for kamailio 3.3.2
The problem is that I need to handle resource-list updates on my
kamalio server.
For testing purposes I use Jitsi client.
Expected:
1) When a new contact is added to Jitsi or an old one is removed,
Jitsi sends updated resource-list XML to caps.
- This works fine, I can see PUT request in Wireshark and I can
see following log from kamailio.cfg:
xlog("===== xhttp put: refreshing resource-list for
$var(uri)\n");
rls_update_subs("$var(uri)", "presence");
which hopefully means that rls_update_subs function has been called.
2) After this function was called, I expect SUBSCRIBE messages in
backend, not in Jitsi, but I still see Jitsi sending SUBSCRIBE for
each contact.
What am I doing wrong? Any help would be useful!
Regards,
Alex.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4323
days inactive
4324
days old
3 comments
4 participants
participants (4)
-
Aleksandrs Semenenko -
Dmytro Bogovych -
Juha Heinanen -
Peter Dunkley