Hello all,

I am trying to setup cpl-c.

I am using latest cvs head.

I have setup ser with cpl-c and this seems to run.

I now try to do some test with the cpl script but the cpl-c engine reports:

Jul 26 13:54:09 localhost ser: cpl: start script processing now Jul 26 13:54:09 localhost ser: DEBUG:cpl-c:get_dest_user: tring to get user from new_uri Jul 26 13:54:09 localhost ser: DEBUG:cpl-c:get_dest_user: tring to get user from R_uri Jul 26 13:54:09 localhost ser: DEBUG:get_user_script: fetching script for user 200@212.x.x.x Jul 26 13:54:09 localhost ser: DEBUG:get_user_script: we got the script len=311 Jul 26 13:54:09 localhost ser: ERROR:build_cpl_interpreter: first node is not CPL!! Jul 26 13:54:09 localhost ser: cpl: script processing has been finished

Is there a sample script that will do call forward on busy /no answer ?

I have tried different scripts from the draft-ietf-iptel-cpl-09.pdf but all give this errors.

tested with: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE cpl PUBLIC '-//IETF//DTD RFCxxxx CPL 1.0//EN' 'cpl.dtd'> <cpl> <incoming> <location url="sip:200@212.x.x.x"> <proxy timeout="10"> <noanswer> <location url="sip:800@212.x.x.x" clear="yes" /> </noanswer> </proxy> </location> </incoming> </cpl>

any ideas are welcome ?

Arne

-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of karunb@omnitechnology.net Sent: maandag 26 juli 2004 7:30 To: Jan Janak Cc: serusers@lists.iptel.org Subject: Re: [Serusers] problems with ul show <username>

Hi Vandaal, I have problem working with the MYSQL DataBase,Here is my ser.cfg file I was not able to get 407 message the Authentication and it doesn't use the MYSQL Data base for Authentication even if i give incorrect password i get 200 ok so can you help me on this.

Regards, Karun

# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params -- #modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic ------------------- # main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("172.16.24.180", "subscriber")) { www_challenge("172.16.24.180", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers