You most likely need to add a section in the correct location in the cfg to change the dst based on the dialed digits such as below. You need to keep in mind where you put this in the script. Keep in mind that you don't want to step on the lookup for locally registered contacts. if (uri=~"^sip:1[0-9]{10}@") || (uri=~"^sip:[0-9]{10}@") || (uri=~"^sip:011[0-9]+@.*") { if (uri=~"^sip:[0-9]{10}@") { prefix("1"); # if sip provider require leading 1 }; rewritehostport("192.168.1.1:5060"); # to you sip provider route(1); # send to t_relay route section return; }; ----- Original Message ----- *From:* Robert Kennedy <rob.s.kennedy(a)gmail.com> *To:* users(a)openser.org *Sent:* Friday, March 10, 2006 7:29 AM *Subject:* [Users] Getting Started - Basic Proxy Im currently learning OpenSer and have accomplished the following: Installed: Centos 4.2 OpenSer: V1.0.1 I have 2 x-lite client registering and calling each other. Question: How do I proxy on SIP requests to a 3rd part SIP Provider. eg. Sipgate xlite ---> Ser ---> Sipgate Im just getting confused on how to configure the next hop routing? Currently as expected im getting a 404 Not Found unless I call one of the x-lite phones. I want to be able to terminate out to a SIP-to-PSTN provider. Regards Rob. ------------------------------ _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Hi Where I write the sip server (pstn gateway) username and password ?

Or the gateway must allow per IP or host logins ?

roberto 2006/3/10, Glenn Dalgliesh &lt;glenn(a)routerboy.com <mailto:glenn@routerboy.com>>: You most likely need to add a section in the correct location in the cfg to change the dst based on the dialed digits such as below. You need to keep in mind where you put this in the script. Keep in mind that you don't want to step on the lookup for locally registered contacts. if (uri=~"^sip:1[0-9]{10}@") || (uri=~"^sip:[0-9]{10}@") || (uri=~"^sip:011[0-9]+@.*") { if (uri=~"^sip:[0-9]{10}@") { prefix("1"); # if sip provider require leading 1 }; rewritehostport("192.168.1.1:5060 <http://192.168.1.1:5060>"); # to you sip provider route(1); # send to t_relay route section return; }; ----- Original Message ----- *From:* Robert Kennedy <mailto:rob.s.kennedy@gmail.com> *To:* users(a)openser.org <mailto:users@openser.org> *Sent:* Friday, March 10, 2006 7:29 AM *Subject:* [Users] Getting Started - Basic Proxy Im currently learning OpenSer and have accomplished the following: Installed: Centos 4.2 OpenSer: V1.0.1 I have 2 x-lite client registering and calling each other. Question: How do I proxy on SIP requests to a 3rd part SIP Provider. eg. Sipgate xlite ---> Ser ---> Sipgate Im just getting confused on how to configure the next hop routing? Currently as expected im getting a 404 Not Found unless I call one of the x-lite phones. I want to be able to terminate out to a SIP-to-PSTN provider. Regards Rob. ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)openser.org <mailto:Users@openser.org> http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org <mailto:Users@openser.org> http://openser.org/cgi-bin/mailman/listinfo/users -- Ing. Roberto Pereyra ContenidosOnline Servidores BSD, Solaris y Linux Soporte técnico ISPs Jabber ID: rpereyra(a)lugmen.org.ar <mailto:rpereyra@lugmen.org.ar> For reliable and professional DNS, use DNS Made Easy! http://www.dnsmadeeasy.com/u/14989 <http://www.dnsmadeeasy.com/u/14989> ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users