Hi,
I m using radius with SER-0.9.0 and also using all the reqd functions viz. www_raidus_authorize etc... , but when I ngrep for any connection with my radius server, I don't get any radius-packets in the result. Also the log file contains "rc_send_server: no reply from RADIUS server a.b.c.d.:1812" (a.b.c.d is the radius server's IP). This is despite the fact that the radius server is running and hosting another running service, also radisuclient is configured fine.
Kindly guide.
Regards,
Ashutosh Kumar
Chetu, Inc.
Ph : 1(305) 402 6724 - Witin US
Ph : 91 120 5323340 - Outside US
Fax:1 (305) 832 5987
For more information, please visit http://www.chetu.com
Did you specify the bindaddr in the radius client config file? Also make sure you define the radius service in the /etc/services file.
Ashutosh Kumar wrote:
Hi,
I m using radius with SER-0.9.0 and also using all the reqd functions viz. www_raidus_authorize etc….. , but when I ngrep for any connection with my radius server, I don’t get any radius-packets in the result. Also the log file contains “rc_send_server: no reply from RADIUS server a.b.c.d.:1812” (a.b.c.d is the radius server’s IP). This is despite the fact that the radius server is running and hosting another running service, also radisuclient is configured fine.
Kindly guide.
Regards,
Ashutosh Kumar
Chetu, Inc.
Ph : 1(305) 402 6724 - Witin US
Ph : 91 120 5323340 - Outside US
Fax:1 (305) 832 5987
For more information, please visit http://www.chetu.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Thanks for the reply Steve, The radius services is there in the /etc/services file .
.. .. .. radius 1812/tcp # Radius radius 1812/udp # Radius radius-acct 1813/tcp radacct # Radius Accounting radius-acct 1813/udp radacct # Radius Accounting .. .. ..
But when I add the line ... ... binaddr a.b.c.d ... ...
(where a.b.c.d is the public IP of the SER machine) to my radiusclient.conf, SER dies with the following message in the log,
/usr/local/etc/radiusclient/radiusclient.conf: line 29: bogus format:
Ashutosh
-----Original Message----- From: Steve Blair [mailto:blairs@isc.upenn.edu] Sent: Tuesday, August 23, 2005 12:31 AM To: Ashutosh Kumar Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Radius packets not being sent to radius server
Did you specify the bindaddr in the radius client config file? Also make sure you define the radius service in the /etc/services file.
Ashutosh Kumar wrote:
Hi,
I m using radius with SER-0.9.0 and also using all the reqd functions viz. www_raidus_authorize etc... , but when I ngrep for any connection with my radius server, I don't get any radius-packets in the result. Also the log file contains "rc_send_server: no reply from RADIUS server a.b.c.d.:1812" (a.b.c.d is the radius server's IP). This is despite the fact that the radius server is running and hosting another running service, also radisuclient is configured fine.
Kindly guide.
Regards,
Ashutosh Kumar
Chetu, Inc.
Ph : 1(305) 402 6724 - Witin US
Ph : 91 120 5323340 - Outside US
Fax:1 (305) 832 5987
For more information, please visit http://www.chetu.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Ashutosh Kumar wrote:
Thanks for the reply Steve, The radius services is there in the /etc/services file .
.. .. .. radius 1812/tcp # Radius radius 1812/udp # Radius radius-acct 1813/tcp radacct # Radius Accounting radius-acct 1813/udp radacct # Radius Accounting .. .. ..
But when I add the line ... ... binaddr a.b.c.d ... ...
(where a.b.c.d is the public IP of the SER machine) to my radiusclient.conf, SER dies with the following message in the log,
Sounds like you're operating in a NAT's dual homed environment are you? If so do you see packets on any of your other interfaces with ngrep?
/usr/local/etc/radiusclient/radiusclient.conf: line 29: bogus format:
Ashutosh
-----Original Message----- From: Steve Blair [mailto:blairs@isc.upenn.edu] Sent: Tuesday, August 23, 2005 12:31 AM To: Ashutosh Kumar Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Radius packets not being sent to radius server
Did you specify the bindaddr in the radius client config file? Also make sure you define the radius service in the /etc/services file.
Ashutosh Kumar wrote:
Hi,
I m using radius with SER-0.9.0 and also using all the reqd functions viz. www_raidus_authorize etc... , but when I ngrep for any connection with my radius server, I don't get any radius-packets in the result. Also the log file contains "rc_send_server: no reply from RADIUS server a.b.c.d.:1812" (a.b.c.d is the radius server's IP). This is despite the fact that the radius server is running and hosting another running service, also radisuclient is configured fine.
Kindly guide.
Regards,
Ashutosh Kumar
Chetu, Inc.
Ph : 1(305) 402 6724 - Witin US
Ph : 91 120 5323340 - Outside US
Fax:1 (305) 832 5987
For more information, please visit http://www.chetu.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Ashutosh Kumar -
Steve Blair