Hello,
the configuration file obviously is lacking proper routing of requests
within dialog. It is not an easy task to adjust it because you have
custom logic there that one doesn't know what is supposed to do.
Again, from my point of view, the easiest way is to go start from the
example config in dispatcher readme:
Don't change anything in request route before the line:
# account only INVITEs
and you have routing of requests within dialog done properly. Also, don
change the content of route[RELAY].
Cheers,
Daniel
On 11/11/16 06:24, Slava Bendersky wrote:
Hello Daniel,
I really ask for help, here are configuration file
https://paste.fedoraproject.org/477652/88413891/
I spent quite a lot of time trying understand loose_route()
/record_route() mix.
I can get signalling working, call is not disconnects, but no RTP. Or
I can get rtp and signalling BYE is not routed properly.
My setup is just proxy all requests to freesiwtch boxes base on
dispatcher selection where kamailio setup with 2 interfaces public and
private.
I really appreciate on you time and help.
Slava.
------------------------------------------------------------------------
*From: *"volga629" <volga629(a)skillsearch.ca>
*To: *"sr-users" <sr-users(a)lists.sip-router.org>
*Cc: *miconda(a)gmail.com
*Sent: *Thursday, 10 November, 2016 23:54:40
*Subject: *Re: [SR-Users] BYE dispatcher
Hello Daniel,
What
------------------------------------------------------------------------
*From: *"volga629" <volga629(a)skillsearch.ca>
*To: *miconda(a)gmail.com
*Cc: *"sr-users" <sr-users(a)lists.sip-router.org>
*Sent: *Thursday, 10 November, 2016 11:25:19
*Subject: *Re: [SR-Users] BYE dispatcher
Hello Daniel,
My setup is proxy all requests to freeswitch via dispatcher.
Slava.
------------------------------------------------------------------------
*From: *"Daniel-Constantin Mierla" <miconda(a)gmail.com>
*To: *"volga629" <volga629(a)skillsearch.ca>ca>, "sr-users"
<sr-users(a)lists.sip-router.org>
*Sent: *Thursday, 10 November, 2016 04:56:53
*Subject: *Re: [SR-Users] BYE dispatcher
Hello,
as I said before, the registrations have little to do with calls in
sip, unless there is gruu in use.
Cheers,
Daniel
On 09/11/16 18:07, Slava Bendersky wrote:
Hello Everyone,
I cleared registrations and tried again and issue still present.
Client reply with 481.
IP (tos 0x0, ttl 52, id 7731, offset 0, flags [none], proto UDP
(17), length 638)
client_pub_ip.49383 > proxy_pub_ip.llrp: [udp sum ok] UDP, length 610
E..~.3..4...c....E.\.....j..SIP/2.0 481 Call Leg/Transaction Does
Not Exist
Via:
SIP/2.0/UDP proxy_pub_ip:5084;branch=z9hG4bK3ea6.0c594485bff5b216f30af0f6172cb2b9.0
Via: SIP/2.0/UDP
10.18.130.24:5160;received=10.18.130.24;rport=5160;branch=z9hG4bKm80c0USSKv5Bp
From: "Test Extension" <sip:4300@sip.company.tld>;tag=SXt3DQQ90a0Dj
To: <sip:4300@client_pub_ip:49383>;tag=719973534
Call-ID: 1abc150b-2141-1235-b5ad-5254003e39bb
CSeq: 99019404 BYE
Supported: replaces, path, eventlist
User-Agent: Grandstream Wave 1.2.2
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO,
REFER, UPDATE, MESSAGE
Content-Length: 0
Slava.
------------------------------------------------------------------------
*From: *"volga629" <volga629(a)skillsearch.ca>
*To: *miconda(a)gmail.com, "sr-users" <sr-users(a)lists.sip-router.org>
*Sent: *Wednesday, 9 November, 2016 12:28:32
*Subject: *Re: [SR-Users] BYE dispatcher
Hello Everyone,
I changed dispatcher algorithm from 0 to 1 and start working as
expected. Yes group 0 is accepted.
route[DISPATCHER] {
if(!ds_select_dst("0", "1")) {
xlog("L_ERROR","ERROR: Proxy Mapping - Desitnation for $fd not
found...request dropped \n");
sl_send_reply("404","Desitination Not Found \n");
drop();
} else {
$var(did) = 1;
}
if($var(did)) {
if (!t_relay()) {
sl_reply_error();
}
#forward();
}
t_on_failure("DISPATCHER_FAIL_ROUTE");
exit;
}
Slava.
------------------------------------------------------------------------
*From: *"Daniel-Constantin Mierla" <miconda(a)gmail.com>
*To: *"sr-users" <sr-users(a)lists.sip-router.org>
*Sent: *Wednesday, 9 November, 2016 04:33:33
*Subject: *Re: [SR-Users] BYE dispatcher
Hello,
On 08/11/16 20:42, Slava Bendersky wrote:
Hello Everyone,
My setup is kamailio as proxy with few boxes of freeswitch in
the LAN. Having issue with BYE when extensions register on
different freeswitch boxes. Here are some trace of the call.
Not sure if this tag= miss match or routing.
Dispatcher use group 0 with option 4 (round robin).
is group value 0 accepted? I think this may create problems if a
function returns the group in the config as return code -- iirc,
this was changed maybe for lcr or permissions.
On the other hand, the registrations are quite independent in SIP
in relation with calls. The BYE should be routed based on
record-routing to the freeswitch that was involved in routing
initial INVITE, with no relation to new registrations from end
devices. Is the BYE sent to the freeswitch that got the initial BYE.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 -
http://www.asipto.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 -
http://www.asipto.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users