19 Aug
2003
19 Aug
'03
7:45 p.m.
Well, you need to use the enum feature in your script, not just to load
the module. For example at iptel, we resolve all numbers beginning with +
by ENUM:
# is this an ENUM destination (leading +?)
if (method=="INVITE" && uri=~"sip:\+[0-9]+@iptel\.org") {
if (!enum_query("voice")) # if parameter empty, it defaults to
"e2u+sip"
enum_query(""); # E2U+sip
};
-jiri
At 04:30 PM 8/19/2003, radan wrote:
Hello all !
This time I have problem with enum (ver 0.8.11pre29)
I've loaded a module enum.so and did ENUM NAPTR Records like this
(according with draft-ietf-sipping-e164-02)
$TTL 259200
@ IN SOA dns.gda.pl. dns.gda.pl. (
3
1D 2H 4W 4D
)
IN NS dns.gda.pl.
$ORIGIN 7.7.0.1.7.4.3.8.5.8.4.e164.arpa.
IN NAPTR 100 10 "u" "sip+e2u"
"!^.*$!sip:anji@mydomian.pl!" .
IN NAPTR 100 20 "u" "mailto+e2u"
"!^.*$mailto:radan@.mydomian.pl!" .
The zone is loaded correctly.
When i dial to +48583471077 or 48583471077 I have 404 (User nod found)
Do I need some special parameters or commands in ser.cfg ?
I saw all archive and did't find information.
Any help will be appreciate.
Greetings
Andrzej
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
20 Aug
20 Aug
1:03 p.m.
New subject: [Serusers] ENUM service
On Tue, 19 Aug 2003, Jiri Kuthan wrote:
Well, you need to use the enum feature in your script,
not just to load
the module. For example at iptel, we resolve all numbers beginning with +
by ENUM:
# is this an ENUM destination (leading +?)
if (method=="INVITE" && uri=~"sip:\+[0-9]+@iptel\.org")
{
if (!enum_query("voice")) # if parameter empty, it defaults to
"e2u+sip"
enum_query(""); # E2U+sip
};
Thanks Jiri but it still doesn't works.
Ser does't send query about NAPTR record
to my DNS :(
Is still have 404 :(
The zone is correct (received from dns query for my DNS enum)
7.7.0.1.7.4.3.8.5.8.4.e164.arpa. 259200 IN NAPTR 100 10 "u" "sip+e2u"
"!^.*$!sip:radan@gda.pl!"
21 Aug
21 Aug
8:14 p.m.
New subject: [Serusers] ENUM service
For all Enum testers
I' ve tested Jiri's code and I think, there shoudl be an * behind
numbers && uri=~"sip:\+[0-9]*@iptel\.org
(if I use the domain [not only uri=~"sip:\+[0-9]*@] it doesn't work.
It's my fault,I think, but I can't figure it out)
Depends on script, but sometimes could be usefull to test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" ||
method=="ACK").
I'm not sure, but in my script it depends whether I cover all other
redirections and lookup("location") with (method=="INVITE") or not
Don't forget to put the code BEFORE lookup("location");
Jan
On Wed, 2003-08-20 at 12:03, radan wrote:
On Tue, 19 Aug 2003, Jiri Kuthan wrote:
Well, you need to use the enum feature in your
script, not just to load
the module. For example at iptel, we resolve all numbers beginning with +
by ENUM:
# is this an ENUM destination (leading +?)
if (method=="INVITE" && uri=~"sip:\+[0-9]+@iptel\.org")
{
if (!enum_query("voice")) # if parameter empty, it defaults to
"e2u+sip"
enum_query(""); # E2U+sip
};
Thanks Jiri but it still doesn't works.
Ser does't send query about NAPTR record
to my DNS :(
Is still have 404 :(
The zone is correct (received from dns query for my DNS enum)
7.7.0.1.7.4.3.8.5.8.4.e164.arpa. 259200 IN NAPTR 100 10 "u" "sip+e2u"
"!^.*$!sip:radan@gda.pl!"
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
10:40 p.m.
New subject: [Serusers] ENUM service
At 07:14 PM 8/21/2003, Jan Ruzicka wrote:
For all Enum testers
I' ve tested Jiri's code and I think, there shoudl be an * behind
numbers && uri=~"sip:\+[0-9]*@iptel\.org
What is the problem with +? That tells that I would like to have at least
one digit....
(if I use the domain [not only
uri=~"sip:\+[0-9]*@] it doesn't work.
It's my fault,I think, but I can't figure it out)
Show us your regexp and requests -- we will see :)
Depends on script, but sometimes could be usefull to
test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" || method=="ACK").
Agreed, thanks.
-jiri
22 Aug
22 Aug
9:56 a.m.
New subject: [Serusers] ENUM service
On Thu, 2003-08-21 at 21:40, Jiri Kuthan wrote:
At 07:14 PM 8/21/2003, Jan Ruzicka wrote:
Its weird, I wrote the line once
more, tested it part by part and it works :-)
For all Enum testers
I' ve tested Jiri's code and I think, there shoudl be an * behind
numbers && uri=~"sip:\+[0-9]*@iptel\.org
What is the problem with +? That tells that I would like to have at least
one digit....
(if I use the domain [not only
uri=~"sip:\+[0-9]*@] it doesn't work.
It's my fault,I think, but I can't figure it out)
Show us your regexp and requests -- we will see :) Depends on
script, but sometimes could be usefull to test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" || method=="ACK").
Agreed, thanks.
-jiri
3:12 p.m.
New subject: [Serusers] ENUM service
On 21-08 21:40, Jiri Kuthan wrote:
Does it really make sense to do ENUM lookup for CANCEL and ACK ? ACK
is an in-dialog request and thus Request-URI will contain Contact of
the callee -- which will be not an ENUM number.
In case of CANCEL, it makes sense only if the Request-URI of the
CANCEL is used to match ENUM-rewritten Request-URI of the original
INVITE.
Jan.
Depends on
script, but sometimes could be usefull to test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" || method=="ACK").
Agreed, thanks.
3:15 p.m.
New subject: [Serusers] ENUM service
At 02:12 PM 8/22/2003, Jan Janak wrote:
On 21-08 21:40, Jiri Kuthan wrote:
Does it really make sense to do ENUM lookup for CANCEL and ACK ? ACK
is an in-dialog request and thus Request-URI will contain Contact of
the callee -- which will be not an ENUM number.
indeed, ACK does not matter.
Depends on
script, but sometimes could be usefull to test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" || method=="ACK").
Agreed, thanks. In case of CANCEL, it makes sense only if the
Request-URI of the
CANCEL is used to match ENUM-rewritten Request-URI of the original
INVITE.
Which is only always.
-jiri
3:19 p.m.
New subject: [Serusers] ENUM service
At 02:15 PM 8/22/2003, Jiri Kuthan wrote:
At 02:12 PM 8/22/2003, Jan Janak wrote:
Errata: it matters too, think of stateless forwarding. -jiri
--
Jiri Kuthan http://iptel.org/~jiri/
On 21-08 21:40, Jiri Kuthan wrote:
Does it really make sense to do ENUM lookup for CANCEL and ACK ? ACK
is an in-dialog request and thus Request-URI will contain Contact of
the callee -- which will be not an ENUM number.
indeed, ACK does not matter. Depends on
script, but sometimes could be usefull to test CANCEL and ACK
too (method=="INVITE" || method=="CANCEL" || method=="ACK").
Agreed, thanks.
3:33 p.m.
New subject: [Serusers] ENUM service
On 22-08 14:19, Jiri Kuthan wrote:
At 02:15 PM 8/22/2003, Jiri Kuthan wrote:
No, it doesn't matter. In-dialog requests are routed according to the
Route headers--it doesn't matter if you forward them statefully or
statelessly.
Jan.
At 02:12 PM 8/22/2003, Jan Janak wrote:
Errata: it matters too, think of stateless forwarding. -jiri On 21-08 21:40, Jiri Kuthan wrote:
indeed, ACK does not matter. >Depends on script, but sometimes could be
usefull to test CANCEL and ACK
>too (method=="INVITE" || method=="CANCEL" ||
method=="ACK").
Agreed, thanks.
Does it really make sense to do ENUM lookup for CANCEL and ACK ? ACK
is an in-dialog request and thus Request-URI will contain Contact of
the callee -- which will be not an ENUM number.
7:10 p.m.
New subject: [Serusers] ENUM service
At 02:33 PM 8/22/2003, Jan Janak wrote:
On 22-08 14:19, Jiri Kuthan wrote:
We are speaking about CANCEL (and also negative ACK), which are not in-dialog requeests.
That's it.
-jiri
At 02:15 PM 8/22/2003, Jiri Kuthan wrote:
No, it doesn't matter. In-dialog requests are routed according to the
Route headers--it doesn't matter if you forward them statefully or
statelessly. At 02:12 PM 8/22/2003, Jan Janak wrote:
Errata: it matters too, think of stateless forwarding. -jiri On 21-08 21:40, Jiri Kuthan wrote:
> >Depends on script, but sometimes could be usefull to test CANCEL and ACK
> >too (method=="INVITE" || method=="CANCEL" ||
method=="ACK").
>
> Agreed, thanks.
Does it really make sense to do ENUM lookup for CANCEL and ACK ? ACK
is an in-dialog request and thus Request-URI will contain Contact of
the callee -- which will be not an ENUM number.
indeed, ACK does not matter.
7763
days inactive
7766
days old
9 comments
4 participants
participants (4)
-
Jan Janak -
Jan Ruzicka -
Jiri Kuthan -
radan