Karel,
I do have an older version of SERWEB. I will install the latest. I guess I
will also need to install the lastest SER. May as well go to FC3 while I am
at it.
BTW. I was searching the newsgroups and I fixed the problem by doing the
following:
I changed config.php as follows:
$this->realm=$this->domainnam=egrep_replace(...) CHANGE TO
$this->realm=$this->domainname="sip.mydomain.net"
I don't understand why I had to do this.
Leo P.
-----Original Message-----
From: Karel Kozlik [mailto:karel@iptel.org]
Sent: Thursday, June 30, 2005 9:31 AM
To: Leo
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Logging into SERWEB
Hi Leo,
which version of serweb are you useing? I wrote about the latest (0.9.3)
Thank you for the quick response and the thorough answer, but I
cannot seem
to follow your advice because:
1) I cannot find the file 'configure_data_layer.php'. I even did and
updatedb and a locate.
2) There is nothing about username and password on my ser.cfg.
Sorry, I'm not expert to configuration of ser. But you should have in
ser.cfg something like this:
modparam("usrloc|avp_db", "db_url",
"mysql://ser:heslo@localhost/ser")
If you haven't probably the default (mysql://ser:heslo@localhost/ser) is
used. This db_url is in format:
mysql://username:password@host/db_name
3) I don't know which .php file to change to add
'$config->enable_loging =
true'. I cannot find this parameter in the config.php file. I also don't
know to where the logs would be stored.
config.php is the right file. If 'enable_loging' isn't here you probably
have some old serweb.
Karel
The result of the sql query were as follows
Username = admin
Password = heslo
Domain =
sip.mydomain.net
Leo P.
-----Original Message-----
From: Karel Kozlik [mailto:karel@iptel.org]
Sent: Thursday, June 30, 2005 7:36 AM
To: Leo
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Logging into SERWEB
Hi Leo,
there are two kinds of user:
1. system user for login into mysql.
Default username=ser, password=heslo. This is used for security your
database against unauthorized access. This values should be set in
config_data_layer.php (and ser.cfg of course). How to change default
password you can find in mysql manual.
2. sip users
Serweb admin is special sip user. Default username is
admin@<your_domain> and password is heslo. Usernames and passwords of
sip users are stored in table 'subscriber' in DB. To check your exact
values you can login to mysql from command line:
mysql -u ser -pheslo ser
and type:
select username, domain, password from subscriber;
If you still can't login into serweb follow this FAQ:
Q: Still can't login into serweb by default username and password
A: Enable loging in serweb ($config->enable_loging = true) and
see log file. For more verbosity set log level to PEAR_LOG_DEBUG
Karel
Leo napsal(a):
Dear serusers,
It still does not work. Here is what I did so far to figure this out.
BACKGROUND INFO:
1) When I log in to MySQL from the command line I use the following
command:
"mysql -pMyPwd ser"
2) From conf.php: db_host=123.123.123.123, db_name=ser, db_user=ser,
db_pass=heslo
3) My domain is
sip.leosser.net
QUESTIONS/PROBLEMS :
1) Shouldn't db_user='admin' and NOT 'ser' since this is what the
'username'
field is for the password 'heslo' in the
MySQL database? However, if I
change this I don't even get to the login screen on serweb.
2) I have tried logging in as admin(a)sip.leosser.net and password heslo,
root(a)sip.leosser.net and mypwd. Nothing works when I do get to the serweb
login screen.
I am stuck. Anyone have any suggestions?
Leo P.
leo(a)ltcjp.com
-----Original Message-----
From: li wei [mailto:augzbaby@yahoo.com.au]
Sent: Wednesday, June 29, 2005 10:14 PM
To: Leo
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Logging into SERWEB
Please make sure your username, password and domain
values are exactly matched the values of your
subscriber table.
Wilson
--- Leo <leo(a)ltcjp.com> wrote:
Dear serusers,
I successfully installed SERWEB.I think.
However, I cannot seem to login at the login screen.
I go to
http://mydomain/admin/index.php and I get
the login screen, but
nothing I try there works. What could this be?
I already tried:
'root' and my passoword
admin and heslo
I don't know what else to do. Please help.
Sincerely,
Leo Papadopoulos
leo(a)ltcjp.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
____________________________________________________
Do you Yahoo!?
Try Yahoo! Photomail Beta: Send up to 300 photos in one email!
http://au.photomail.mail.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers