I build a voip system by ser0.8.14 + sems-2004-07-27 + serweb_2004-07-27. my site : http://dlphs.com or http://sip800.8866.org

but I don't use my voicemail.

who can help me ? thank u. please mail to jqkadl@online.ln.cn or sipsys@sina.com

my ser.cfg and voicemail.cfg and sems.conf :

# # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/group.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

# modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc|registrar", "use_domain", 1)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

modparam("group", "db_url", "mysql://xxx:xxx@localhost/ser")

# time to give up on ringing -- global timer, applies to # all transactions modparam("tm", "fr_inv_timer", 30)

# ------------------------- request routing logic -------------------

# main routing logic route {

if (!mf_process_maxfwd_header("10")) { log("LOG: Too many hops\n"); sl_send_reply("483", "Alas Too Many Hops"); break; };

if (!(method=="REGISTER")) record_route(); if (loose_route()) { t_relay(); break; };

if (!uri==myself) { t_relay(); break; };

if (method == "REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; };

if (!save("location")) { sl_reply_error(); }; break; };

if (!uri==myself) { t_relay(); break; };

# does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { setflag(4); };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; };

# if user is on-line and is in voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { t_on_failure("1"); }; t_relay(); }

# ------------- handling of unavailable user ------------------ route[4] {

# non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { sl_send_reply("404", "Not Found"); break; };

# not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; };

# forward to voicemail now rewritehostport("sip800.8866.org:5090"); t_relay_to_udp("sip800.8866.org", "5090"); }

# if forwarding downstream did not succeed, try voicemail running # at vm_host:5090

failure_route[1] { revert_uri(); rewritehostport("sip800.8866.org:5090"); append_branch(); t_relay_to_udp("sip800.8866.org", "5090"); }

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

# # $Id: voicemail.cfg,v 1.2 2003/10/10 06:27:18 jiri Exp $ # # this script is configured for use as voicemail UAS; it processes # INVITEs and BYEs and asks SEMS to record media via "vm"; in this # script, all record-routing and other constructs known from proxy # scripts are not present -- it is a simple UAS #

# ----------- global configuration parameters ------------------------

#debug= # debug level (cmd line: -dddddddddd) #fork=no #log_stderror=yes # (cmd line: -E)

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5090 children=4 fifo="/tmp/vm_ser_fifo" fifo_mode=0666

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/vm.so"

# ----------------- setting module-specific parameters ---------------

modparam("voicemail", "db_url","mysql://xxx:xxx@localhost/ser") modparam("voicemail", "subscriber_table", "subscriber") modparam("voicemail", "email_column", "email_address")

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; #if (len_gt( max_len )) { # sl_send_reply("513", "Message too big"); # break; #};

if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

if (!uri==myself) { sl_send_reply("404", "not reponsible for host in r-uri"); break; };

# Voicemail specific configuration - begin

if(method=="ACK" || method=="INVITE" || method=="BYE"){

if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; };

t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ******************\n"); if (uri=~"sip:1000 at .*" || uri=~"sip:1001 at .*") { if (!vm("/tmp/am_fifo", "announcement")) { log("couldn't contact announcement server\n"); t_reply("500", "couldn not contact announcement server"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; }; log("**************** vm start - end ******************\n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm end - end ******************\n"); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); }

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

# $Id: sems.conf.sample,v 1.11.2.5 2004/05/24 14:33:07 rco Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value1, value2 # i like this option #

################################## # global parameters # ##################################

# optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes

# optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=no

# optional parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=1

# optional parameter: fifo_name=<filename> # # - path and file name of our fifo file (same as -i) fifo_name=/tmp/am_fifo

# optional parameter: ser_fifo_name=<filename> # # - path and file name of Ser's fifo file (same as -o) ser_fifo_name=/tmp/ser_fifo # ser_fifo_name=/tmp/vm_ser_fifo

# optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/usr/local/lib/sems/plug-in/

# optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=localhost

# optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25

# optional parameter: rtp_low_port=<port> # # - sets port of rtp lowest server #rtp_low_port=1024

# optional parameter: rtp_high_port=<port> # # - sets port of rtp highest server #rtp_high_port=65535

################################## # module specific parameters # ##################################

# sample voicemail configuration (inline) config.voicemail=inline

# optional parameter: announce_path=<path> # # - sets the path where announce files are searched for # - the file to be played is determined the following way: # <announce_path>/<domainname>/<username>.wav # if this file is not available <announce_path>/<default_anounce> is used announce_path=/usr/local/lib/sems/audio/

# parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav

# parameter: max_record_time=<seconds> # # - maximum record time max_record_time=30

# parameter: email_template=<filename> # # - email template file # # See the README file in <sems-src>/plug-in/voicemail # for more information on the syntax used. # email_template=/usr/local/lib/sems/plug-in/mail.template

# end of configuration section for voicemail module config.voicemail=end

# sample announcement configuration (inline) config.announcement=inline

# optional parameter: announce_path=<path> # # - sets the path where announce files are searched for announce_path=/usr/local/lib/sems/audio/

# parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav

# end of configuration section for announcement module config.announcement=end

# sample isdngw module configuration (external file) # config.isdngw=/etc/isdngw.conf

# sample ivr module configuration (inline) config.ivr=inline

#parameter: python_script_path=<full path> python_script_path=/etc/ivr

#parameter: python_script_file=<filename> python_script_file=example.py

# end of configuration section for ivr module config.ivr=end

# sample conference configuration (inline) config.conference=inline

# parameter: default_announce=<filename> # # - sets the full pathed name of the default announce WAV file. # Will be played to lonely users. default_announce=/usr/local/lib/sems/audio/first_participant.wav

# parameter: join_sound=<filename> # # - sets the full pathed name of a WAV file # which will be played to conference users # when a new user joins the conference. join_sound=/usr/local/lib/sems/audio/beep.wav

# parameter: drop_sound=<filename> # # - sets the full pathed name of a WAV file # which will be played to conference users # when a user drops the conference. drop_sound=/usr/local/lib/sems/audio/beep.wav

# end of configuration section for conference module config.conference=end

# example configuration for number reader config.number_reader=inline

number_path=/usr/local/lib/sems/audio/

prolog_file=welcome_to_number_reader.wav

epilog_file=thanks_calling_number_reader.wav

# end of number_reader configuration config.number_reader=end

# add more module configurations here (inline or external): # # config.mymodule=<filename> # or # config.mymodule=inline # ... # config.mymodule=end

_________________________________________________________________ 与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn