4 Jun
2003
4 Jun
'03
1:37 p.m.
Hello,
I experienced some strange behaviour of my kphone (V3.11). When I click
on register the first time nothing happens (no error message, keeps
offline). Clicking the "register" button the second time makes kphone go
online.
With the help of Uli and Daniel (thanks !) I could record the network
traffic caused by both clicks. In the attached file the first two
messages were caused by the first (unsuccessful) click on "register".
The next two messages where caught after my second click on register
which succeeds. Comparing the two requests I saw the different entries
in the "Expires" field (fist 0, second 900) but to my surprise even the
call-IDs are the same.
Do you know what is going wrong here ?
BTW: Of course I don't mind to click on register twice in kphone. But
right now I have a problem receiving messages with MS Messenger (will
describe that separately if I cannot solve it myself) and I'm trying to
find out if the reason is within the SER on UA's side. Therefore I
cannot ignore anything that looks like an error (e.g. wrong config) in
SER or an UA while I'm testing different scenarios.
Thanks,
Alex
4 Jun
4 Jun
4:37 p.m.
keeping callid is legal and desirable for REGISTER requests. REGISTER
with 0 means unREGISTER, no clue why k-phone sends it...
-jiri
At 12:37 PM 6/4/2003, Alexander Hoffmann wrote:
Hello,
I experienced some strange behaviour of my kphone (V3.11). When I click
on register the first time nothing happens (no error message, keeps
offline). Clicking the "register" button the second time makes kphone go
online.
With the help of Uli and Daniel (thanks !) I could record the network
traffic caused by both clicks. In the attached file the first two
messages were caused by the first (unsuccessful) click on "register".
The next two messages where caught after my second click on register
which succeeds. Comparing the two requests I saw the different entries
in the "Expires" field (fist 0, second 900) but to my surprise even the
call-IDs are the same.
Do you know what is going wrong here ?
BTW: Of course I don't mind to click on register twice in kphone. But
right now I have a problem receiving messages with MS Messenger (will
describe that separately if I cannot solve it myself) and I'm trying to
find out if the reason is within the SER on UA's side. Therefore I
cannot ignore anything that looks like an error (e.g. wrong config) in
SER or an UA while I'm testing different scenarios.
Thanks,
Alex
--
Jiri Kuthan http://iptel.org/~jiri/
6:13 p.m.
Jiri Kuthan writes:
keeping callid is legal and desirable for REGISTER
requests. REGISTER
with 0 means unREGISTER, no clue why k-phone sends it...
when kphone is registered with the proxy and the user presses unregister
button, kphone sends register message with expire=0. that causes
unregister button to turn into register button. when the user then
presses register button, kphone sends a register message with
expire=configured value.
i dont see any problem with that behavior.
-- juha
6:19 p.m.
On 04-06 18:13, Juha Heinanen wrote:
Jiri Kuthan writes:
Yes, that's fine. But from time to time you have to press the button
twice to trigger register or unregister. This usually happens when I
am extensively using kphone for some time. I tried to find out where
the problem is but I haven't succeeded yet.
Jan.
keeping callid is legal and desirable for
REGISTER requests. REGISTER
with 0 means unREGISTER, no clue why k-phone sends it...
when kphone is registered with the proxy and the user presses unregister
button, kphone sends register message with expire=0. that causes
unregister button to turn into register button. when the user then
presses register button, kphone sends a register message with
expire=configured value.
i dont see any problem with that behavior.
4:56 p.m.
Hello,
On 04-06 12:37, Alexander Hoffmann wrote:
Hello,
I experienced some strange behaviour of my kphone (V3.11). When I click
on register the first time nothing happens (no error message, keeps
offline). Clicking the "register" button the second time makes kphone go
online.
Yes, this happens sometimes, try to restart kphone.
With the help of Uli and Daniel (thanks !) I could record the network
traffic caused by both clicks. In the attached file the first two
messages were caused by the first (unsuccessful) click on "register".
The next two messages where caught after my second click on register
which succeeds. Comparing the two requests I saw the different entries
in the "Expires" field (fist 0, second 900) but to my surprise even the
call-IDs are the same.
Yes, the message with Expires: 900 is a registration, the other one is
unregistration.
Do you know what is going wrong here ?
Nothing, if you click on register it tries to register. If you click
the button again then it unregisters again, and so on. From time to
time the button needs to be clicked twice (restart should help).
BTW: Of course I don't mind to click on register
twice in kphone. But
right now I have a problem receiving messages with MS Messenger (will
describe that separately if I cannot solve it myself) and I'm trying to
find out if the reason is within the SER on UA's side. Therefore I
cannot ignore anything that looks like an error (e.g. wrong config) in
SER or an UA while I'm testing different scenarios.
Jiri has replied this already.
Jan.
7844
days inactive
7844
days old
4 comments
4 participants
participants (4)
-
Alexander Hoffmann -
Jan Janak -
Jiri Kuthan -
Juha Heinanen