Hi Daniel and all list, Thanks for your support, but as the below diagram, i still have some confused: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user - if we use the server mode: the xmpp-to-sip-gateway and sip-to-xmpp-gateway is the xmpp module, and they have the same domain with sip-server (because the xmpp module is integrated on kamailio server) e.g kamailio1.com. So, at the xmpp client, we add the buddy as: sip-user*sip-server_domain@xmpp_domain= sip-user*kamailio1.com(a)kamailio1.com => the xmpp-server must establish the s2s connection to xmpp_domain, it mean the connection between xmpp-server and the kamailio-server (because xmpp module is integrated on kamailio-server). But how can settup the s2s connection, if the kamailio-server+xmpp-module don't have any running port 5269 ? - if we use the component mode: sip-to-xmpp-gateway is the xmpp module, how about the xmpp-to-sip-gateway, which is the appliance on the network ? the local-xmpp-server or the xmpp module ? Thanks, Huy Nguyen www.htk-inc.com Date: Tue, 19 Oct 2010 09:52:15 +0200 From: miconda(a)gmail.com To: huy_quocnguyen(a)live.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.1 Hello, as said in a previous email, first you have to use last git version of kamailio_3.0 branch. There was a fix for xmpp module since release of 3.0.1. Also you can switch to 3.1.0, or wait few days untill 3.0.4 is released. You have to think the architecture like: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user even some of these components are running in the same application. If you add a buddy in your xmpp user that has the hostname same as xmpp-server domain, then it is clear that xmpp-server will route it locally and not to xmpp-to-sip-gateway. Cheers, Daniel On 10/18/10 10:49 AM, Huy Nguyen wrote: Hi all, Sorry for restore this topic, but i till confused about the guide on xmpp module page. I'm integrating xmpp module to kamailio 3.0.x at my local network, with server mode. The kamailio server have domain: kamailio1.com (192.168.1.26), the xmpp server have domain: xmpp1.com (192.168.1.20). SIP user: 101(a)kamailio1.com XMPP user: 109(a)xmpp1.com Below is the part mention in xmpp doc I confused about, so i'm pasting that: In the destination address we need an extra character as a domain separator, apart from @. The address of the XMPP(jabber) client looks like this: "sip:username<domain_separator>jabber_server@gateway_domain". The address of a SIP client has the following pattern : "sip_username<domain_separator>openser_domain@xmpp_domain"; A common used character in XMPP transports is "%". It mean, from sip client 101(a)kamailio1.com, if I want to chat with xmpp client 109(a)xmpp1.com, I'll add 109 to the contact list of 101 as: sip:109%xmpp1.com@kamailio1.com. It right ? As the similar, i'll add to the buddy list of 109 as: 101%kamailio1.com(a)xmpp1.com ? Can anyone suggest how to test xmpp module ? Thanks, Huy Nguyen www.htk-inc.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com

Hi Daniel and list, I'm using the lastest version of branch 3.0 (download from git), but I want to continue with the previous topic, so I still use the old Subject for easy tracking. How about my question, at the current time, can we use the server mode ? But how can settup the s2s connection, if the kamailio-server+xmpp-module don't have any running port 5269 ? Thanks, Huy Nguyen www.htk-inc.com Date: Wed, 20 Oct 2010 12:48:29 +0200 From: miconda(a)gmail.com To: huy_quocnguyen(a)live.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.1 On 10/20/10 7:33 AM, Huy Nguyen wrote: Hi Daniel and all list, Thanks for your support, but as the below diagram, i still have some confused: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user - if we use the server mode: the xmpp-to-sip-gateway and sip-to-xmpp-gateway is the xmpp module, and they have the same domain with sip-server (because the xmpp module is integrated on kamailio server) e.g kamailio1.com. So, at the xmpp client, we add the buddy as: sip-user*sip-server_domain@xmpp_domain= sip-user*kamailio1.com(a)kamailio1.com => the xmpp-server must establish the s2s connection to xmpp_domain, it mean the connection between xmpp-server and the kamailio-server (because xmpp module is integrated on kamailio-server). But how can settup the s2s connection, if the kamailio-server+xmpp-module don't have any running port 5269 ? Do you run the last version of branch kamailio_3.0? I asked you many time and you come back mentioning an older version. Cheers, Daniel - if we use the component mode: sip-to-xmpp-gateway is the xmpp module, how about the xmpp-to-sip-gateway, which is the appliance on the network ? the local-xmpp-server or the xmpp module ? Thanks, Huy Nguyen www.htk-inc.com Date: Tue, 19 Oct 2010 09:52:15 +0200 From: miconda(a)gmail.com To: huy_quocnguyen(a)live.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.1 Hello, as said in a previous email, first you have to use last git version of kamailio_3.0 branch. There was a fix for xmpp module since release of 3.0.1. Also you can switch to 3.1.0, or wait few days untill 3.0.4 is released. You have to think the architecture like: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user even some of these components are running in the same application. If you add a buddy in your xmpp user that has the hostname same as xmpp-server domain, then it is clear that xmpp-server will route it locally and not to xmpp-to-sip-gateway. Cheers, Daniel On 10/18/10 10:49 AM, Huy Nguyen wrote: Hi all, Sorry for restore this topic, but i till confused about the guide on xmpp module page. I'm integrating xmpp module to kamailio 3.0.x at my local network, with server mode. The kamailio server have domain: kamailio1.com (192.168.1.26), the xmpp server have domain: xmpp1.com (192.168.1.20). SIP user: 101(a)kamailio1.com XMPP user: 109(a)xmpp1.com Below is the part mention in xmpp doc I confused about, so i'm pasting that: In the destination address we need an extra character as a domain separator, apart from @. The address of the XMPP(jabber) client looks like this: "sip:username<domain_separator>jabber_server@gateway_domain". The address of a SIP client has the following pattern : "sip_username<domain_separator>openser_domain@xmpp_domain"; A common used character in XMPP transports is "%". It mean, from sip client 101(a)kamailio1.com, if I want to chat with xmpp client 109(a)xmpp1.com, I'll add 109 to the contact list of 101 as: sip:109%xmpp1.com@kamailio1.com. It right ? As the similar, i'll add to the buddy list of 109 as: 101%kamailio1.com(a)xmpp1.com ? Can anyone suggest how to test xmpp module ? Thanks, Huy Nguyen www.htk-inc.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com

Hi there, After config the component mode as the guide on xmpp module page, how to check that xmpp module have already registered to the local jabberd server ? I enable debug on kamailio and don't see any thing. Thanks, Huy Nguyen www.htk-inc.com From: huy_quocnguyen(a)live.com To: miconda(a)gmail.com; sr-users(a)lists.sip-router.org Date: Thu, 21 Oct 2010 17:09:59 +0700 Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.x Hi Daniel and list, I'm integrating xmpp module to kamailio 3.0.4 with the component mode on my local network. Kamailio: sip.htk.com Jabberd: xmpp2.htk.com With your diagram as the previous mail: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user I'm confused about the phrase: domain_gateway. is it the domain name of xmpp module, i mean: sip.htk.com ? With new release 3.0.4, can we use the simplified form as: username@domain ? Thanks, Huy Nguyen www.htk-inc.com From: huy_quocnguyen(a)live.com To: miconda(a)gmail.com Date: Wed, 20 Oct 2010 18:02:16 +0700 CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.x Hi Daniel and list, I'm using the lastest version of branch 3.0 (download from git), but I want to continue with the previous topic, so I still use the old Subject for easy tracking. How about my question, at the current time, can we use the server mode ? But how can settup the s2s connection, if the kamailio-server+xmpp-module don't have any running port 5269 ? Thanks, Huy Nguyen www.htk-inc.com Date: Wed, 20 Oct 2010 12:48:29 +0200 From: miconda(a)gmail.com To: huy_quocnguyen(a)live.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.1 On 10/20/10 7:33 AM, Huy Nguyen wrote: Hi Daniel and all list, Thanks for your support, but as the below diagram, i still have some confused: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user - if we use the server mode: the xmpp-to-sip-gateway and sip-to-xmpp-gateway is the xmpp module, and they have the same domain with sip-server (because the xmpp module is integrated on kamailio server) e.g kamailio1.com. So, at the xmpp client, we add the buddy as: sip-user*sip-server_domain@xmpp_domain= sip-user*kamailio1.com(a)kamailio1.com => the xmpp-server must establish the s2s connection to xmpp_domain, it mean the connection between xmpp-server and the kamailio-server (because xmpp module is integrated on kamailio-server). But how can settup the s2s connection, if the kamailio-server+xmpp-module don't have any running port 5269 ? Do you run the last version of branch kamailio_3.0? I asked you many time and you come back mentioning an older version. Cheers, Daniel - if we use the component mode: sip-to-xmpp-gateway is the xmpp module, how about the xmpp-to-sip-gateway, which is the appliance on the network ? the local-xmpp-server or the xmpp module ? Thanks, Huy Nguyen www.htk-inc.com Date: Tue, 19 Oct 2010 09:52:15 +0200 From: miconda(a)gmail.com To: huy_quocnguyen(a)live.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Integrate xmpp module with kamailio 3.0.1 Hello, as said in a previous email, first you have to use last git version of kamailio_3.0 branch. There was a fix for xmpp module since release of 3.0.1. Also you can switch to 3.1.0, or wait few days untill 3.0.4 is released. You have to think the architecture like: xmmp-user ------- xmpp-server ------ xmpp-to-sip-gateway ------- sip-to-xmpp-gateway -------- sip-server ------- sip-user even some of these components are running in the same application. If you add a buddy in your xmpp user that has the hostname same as xmpp-server domain, then it is clear that xmpp-server will route it locally and not to xmpp-to-sip-gateway. Cheers, Daniel On 10/18/10 10:49 AM, Huy Nguyen wrote: Hi all, Sorry for restore this topic, but i till confused about the guide on xmpp module page. I'm integrating xmpp module to kamailio 3.0.x at my local network, with server mode. The kamailio server have domain: kamailio1.com (192.168.1.26), the xmpp server have domain: xmpp1.com (192.168.1.20). SIP user: 101(a)kamailio1.com XMPP user: 109(a)xmpp1.com Below is the part mention in xmpp doc I confused about, so i'm pasting that: In the destination address we need an extra character as a domain separator, apart from @. The address of the XMPP(jabber) client looks like this: "sip:username<domain_separator>jabber_server@gateway_domain". The address of a SIP client has the following pattern : "sip_username<domain_separator>openser_domain@xmpp_domain"; A common used character in XMPP transports is "%". It mean, from sip client 101(a)kamailio1.com, if I want to chat with xmpp client 109(a)xmpp1.com, I'll add 109 to the contact list of 101 as: sip:109%xmpp1.com@kamailio1.com. It right ? As the similar, i'll add to the buddy list of 109 as: 101%kamailio1.com(a)xmpp1.com ? Can anyone suggest how to test xmpp module ? Thanks, Huy Nguyen www.htk-inc.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users